Used Eht Hydr. Pressbrake for sale (4,308)

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Rsdoyw Rbyspfx Aahsw Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation Redpfxjxaa A Ne Aahsw * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec Rsdob Rk Ekjpfx Aahow - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - including: - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t Redpfxetqmvzo Aahow - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, Year of construction: 1995, sheet width 6000 mm Rsdpfx Aaoyutt Eshew plate thickness 6 mm distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, controller model: Cybelec DNC 800, bending force (max.): 175 t, distance between stands: 2,550 mm, working length: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Bending length: 3,050 mm Frame gap: 2,550 mm MACHINE DETAILS Control unit: Cybelec DNC 800 Total power requirement: 15 kW Oil capacity: 300 l EQUIPMENT 2 support arms in front of the machine Pneumatic tool clamping Crowning system Controlled axes: y1, y2, x, R 2 manually adjustable backgauge fingers Two-hand foot operation Side safety doors Punch tools Redeyhmc Tepfx Aahjw Segmented V-dies

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Rodpeygw Ahofx Aahew Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Redpfx Aasuddh Aehjw Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Rodswrhwuepfx Aahjw

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Rjdpfstva Dnjx Aahow

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm Redegxnkkepfx Aahow -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos Rjdpjgxnkvjfx Aahew -Dimension: 4050/45 / H130 mm -Weight: 147 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece Redpegxnkcsfx Aahow -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V Rjdpfx Aoxab Tvoahsw main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Rodpfx Aajx Da D Uohjw Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW Rsdpfx Asw Sttaeahsw TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, oil tank capacity: 400 l, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Redpfexwnqcox Aahjw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch - Digital back gauge 1,000 Elgo Rjdpfxjww E Nxs Aahsw - Scrap chute - Rear safety guards - Angle stop - Material support arms

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, controller model: Cybelec ModEva 10S, empty load weight: 16,300 kg, bending force (max.): 170 t, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg Rodpfsxwnv Eox Aahew EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: used, Year of construction: 2016, machine/vehicle number: 24398, functionality: unexamined, controller manufacturer: Cybelec, controller model: Modeva Pac 15, control type: CNC control, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Redpfx Asx Dh U Ioahsw

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm Rsdpfel N Ufyex Aahow EQUIPMENT motorized backgauge 1 side stop sheet holding-up system

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm Rodpewzvntsfx Aahjw

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, ramps adjustable laterally, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, including axle load indicators, surcharge for: galvanized steel front wall: 500 €, hydraulic shifting of the ramps = price: 1,000 €, -- typographical errors, omissions and changes excepted, sample images --, More data at: !, More details at: ! Rjdpfx Ajziakroahow

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 20 lash rings, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, ramps laterally adjustable, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, surcharge for: front wall steel, galvanized: €500, hydraulic adjustment of ramps = price: €1,000. -- Typos, errors, and changes reserved, sample images --, More data at: !, More details: ! Rjdezhr H Nspfx Aahjw

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, ramps adjustable laterally, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, including axle load indicators, surcharge for: galvanized steel front wall: 500 €, hydraulic shifting of the ramps = price: 1,000 €, -- typographical errors, omissions and changes excepted, sample images --, More data at: !, More details at: ! Rodpfxszhf Rbe Aahow