Used Eht Ehs 8-40 for sale (51,987)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Iiedozlkgcspfx Apcsg Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, Ball screw drive Dm63 Stroke 630 PITCH 20MM 13:40 879/11 00000 Iodpozgg Eqsfx Apcoig Steinmeyer 2 units available “Partially unpacked for photography – unused item from stock clearance.”

Condition: excellent (used), Weiss Type: WT3-1000/40 Weiss temperature test chamber with S!MCON / 32 control system, water-cooled Control panel: “Touch panel” The “Touch panel” control panel allows all control and operating commands to be executed simply by touching the function symbols. Adjustable feet To compensate for unevenness in the floor and to ensure sufficient ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 990 liters Test chamber dimensions: height 950 mm, width 1100 mm, depth 950 mm External dimensions: height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Test chamber lighting: halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, rated power 11.5 kW Fuse on customer side: 32 A slow-blow Sound pressure level approx. Iodpjzgbt Nofx Apcsig measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, water-cooled. (Refrigerant converted to R-452A) Control panel: "Touchpanel" On the "Touchpanel" control panel, all control and operating commands can be initiated by simply touching the function symbols. Adjustable feet To compensate for unevenness in the floor and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed in the test chamber. Feedthrough installed as standard: R1: 125 mm L1: 50 mm Test chamber volume: approx. 335 liters Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Iisdpfxezgbkhe Apcjg Temperature change rate: Heating: 3.2 K/min Cooling: 4.0 K/min Maximum heat compensation: 2300 W Data for operation: Test chamber lighting: 2 x 24V, 50W halogen lamps Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A, rated power 4.1 kW Fuse: 16 A slow-blow (provided on-site) Sound pressure level: approx. measured at a distance of 1m from the front, 1m height: 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 For your safety as a buyer, here is the following information: The following steps are performed on our offered chambers in advance: 1. Function check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control panel »Touchpanel« On the »Touchpanel« control panel, all control and operating commands can be triggered by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and test equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Iiodpfxezga Huo Apcjg Test chamber lighting: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse, to be provided by the customer: 16 A, slow-blow Sound pressure level approx. measured at a distance of 1m from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Weiss climate testing chamber. Weiss climate testing chamber, water-cooled (Refrigerant converted to R-452A) Temperature testing Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Iodpfozgavvjx Apcsig Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, time-based ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K Climate testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time-based ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, time-based ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. Iisdpfx Apozgaipsceg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2018, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2018 Control : Sonstige In General: Manufacturer:DMG (Bürener Maschinenfabrik) Year of manufacture:2018 Total number of pumps:5 High-pressure pumps:2 (40 and 80 bar) Filter:Paper belt filter Tank capacity:approx. 980 l Isdpfxozf T Nmo Apcsig

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Four-sided impregnation machine + drying tunnel. Ijdpfx Aezf Iyajpcjig

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Iijdpfx Apszf E E Tecsg Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.

Condition: used, Recording: MS21 Cutting width: 2400mm Iiedpfx Apjzkzdpjceg Machine: A924 Blades: 40% worn

Condition: good (used), Year of construction: 1997, Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer of gearbox: Bonfiglioli type MVF 49/F -Speed: 50 rpm i= 28 -Manufacturer Motor elsto ES FC 80M4A-40 -Power: 0.55 kW -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 375/200/H210 mm -Weight: 12.1 kg Iiedpfezd S Ekjx Apcog

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Iiodpjzd Dm Hefx Apceg Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Iedpfoy H Hvlox Apcoig Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Iiodpfx Aoy Nic Hopcog Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Siemens 1PH5131-4CG40 - main spindle motor SN:E9L81781311005 with 2CW8166-8 blower, Z= K02: vibration level / stage S with single bearing, K20: bearing design / reinforced bearings (FT series), K10: terminal box / terminal box or power connector NDE right, used, normal signs of use, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Iiedpox Dvt Ejfx Apceg

Condition: ready for operation (used), High-performance tool spindle (presumably a WERA custom build) with Widia KM 40 clamping system, max. 8500 rpm. Housing dimensions: 265x152x139mm, connection flange dimensions: 120x125x42mm, with multi-tooth coupling, used, normal signs of wear, 100% functional. ATTENTION: Please request separate pricing for packaging and shipping! Iedpfx Aji D Idiopcjig

Condition: ready for operation (used), Fanuc A06B-6164-H311 #H580 amplifier VSP 20/20/40-7.5 SN V12145477, used, in good condition, 100% functional, delivery as shown in photos Iijdpsx Erggsfx Apceg

Condition: ready for operation (used), Philips 4022 226 3391 CETR PROC MOD-8 card, condition and serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiedpji Ecf Nsfx Apcjg

Condition: new, Rexroth CSHXMP5/…/ 50/..355A11/B1HXUXD6316 MNR: R901130316 for EMAG, unused with storage marks, 100% functional, scope of delivery as per photos Iodjulqiwspfx Apcsig

Condition: ready for operation (used), Philips 4022 226 3390 CENTR PROC MOD-8 card, condition and serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfx Aoi Ecf Espcjig

Condition: ready for operation (used), Rexroth 3 DS 2 EH 10-20/A2X 40 Z8 servo-pressure control valve, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiodji Ecn Uspfx Apcjg

Condition: ready for operation (used), Fanuc A06B-6164-H311 #H580 Amplifier VSP 20/20/40-7.5 SN V12145549, used, good condition, 100% functional, scope of delivery as per photos Iisdpfxorcuz Eo Apcsg

Condition: ready for operation (used), INDUR Antriebstechnik DG80-40 Motor SN:994461/9 + A-31 / 25W Gearbox i = 330, used, normal signs of use, 100% functional, scope of delivery as per photos Isdpeqv Un Ejfx Apcjig

Year of construction: 2010, condition: excellent (used), Technical Details : - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools Iijdpfxofwm D To Apcsg - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit