Used Dryer Dry-Air Koch (Art.2162) for sale (32,169)

Condition: used, Year of construction: 2010, machine/vehicle number: 0226, functionality: fully functional, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, The used HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly suitable for use in laboratories or when frequent material changes occur (e.g., small production runs). Batch dryer/pre-drying station with integrated absorption dryer, type TLZ 12.1. 6 x 15-liter V2A modules with sliding guide and discharge slide. 3 air filters. Fodoy Tn Uvepfx Abgsph Recirculation air cooler. Weekly timer. 6 x red/green traffic lights indicating the end of the drying cycle or a fault at the docking station. Automatic 6-stage air flow control via a frequency converter on the dryer fan. The unit is mobile. Module 10742 - 10746, 10293. Includes a dew point meter for the absorption dryer. For sale to commercial customers only, with no warranty.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace. Fpedpfx Aefz U Hvsbgjh

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Fsdpjy Ny U Tsfx Abgjph

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Fpsder Arrwjpfx Abgoh Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Max. Temperature of heated surfaces 120°C Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely.

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Fedsy H Dv Aepfx Abgeph • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying Chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7,400 x 4,500 x 4,250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency converter Fedpoy Evkpofx Abgeph With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow: 14 m³/h Voltage: 230/400 V Connected load: 12 kW Fans: 3 x 3 kW Control: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating not included! The drying chamber will be professionally dismantled and loaded onto a truck. Transport dimensions: 12 loading meters, approx. 5,000 kg

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Fpjdpjyy R D Tsfx Abgjh Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece Fjdpfx Asyuvp Asbgoph -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer Fpjdpfxoyuut He Abgjh -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Fpodpofn Iudsfx Abgsh Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW Fsdpfx Aou Edhujbgeph - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW Fpedpfx Asu S N R Eobgoh - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm Fjdpjxfkbaofx Abgeph - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 07762, We offer this used sample dryer Tonello TD 25 E, year of manufacture 2018. Machine type: TD 25 E Power supply: 3Ph+GND Voltage and frequency: 400V - 50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 375 kg Fodpfx Abeyt Npmegeph Serial number: 07762 Year of manufacture: 2018 Drum volume: 572 l Installed power: 26 kW Maximum peak current: 65 A Maximum working current: 52 A Power cable section: 16 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710 Fpsdpjmgadpefx Abgeh

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Fpedpfxsuk I Eto Abgeh

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C Fedpjx Sw N Hefx Abgeph -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet Fpedpfxex Ir Tre Abgsh -Manufacturer: Küppersbusch, Electrode dryer type SET-4 -Nominal temperature: up to 300°C -Usable space: WDH 140/140/460 mm -Voltage: 220 V -Power: 0.9 kW -Contents: see photos -Dimensions: 385/365/H695 mm -Total weight: 19.3 kg

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). Fjdpfsffc Ufox Abgsph You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Max. number of shelves: 16 External dimensions: Width: 1,235 mm Fpjdpfjxzukkjx Abgeh Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Height: 800 mm Depth: 510 mm

Condition: used, This listing is for a LTE Scientific Unitemp filtered air drying Cabinet The unit is in full working condition and is ready for immediate release LTE Scientific Unitemp Filtered Air Drying Cabinet Fpjdpfx Asxv D Eysbgjh The LTE Scientific Unitemp Filtered Air Drying Cabinet is designed to provide a controlled, contamination-free environment for drying laboratory equipment. Featuring a fine filter on the air intake, it minimizes particulate contamination, ensuring that freshly washed items remain clean throughout the drying process. Key Features: Capacity: 534 liters, offering ample space for various laboratory drying needs. Temperature Control: Thermostatically controlled with a range from 5 °C above ambient to 65 °C, protected by an over-temperature cut-out device for safety. Air Circulation: A fan circulation system ensures even heat distribution for consistent drying. Construction: Toughened plate glass door for easy monitoring and access. Additional Drying Cabinet Options: Economy Drying Cabinets Large capacity cabinets available at an economical price. Heaters are positioned at the bottom of the cabinet below a perforated base plate and vent through the top. Fan extraction models enhance drying efficiency by actively drawing air through the chamber. Temperature is controlled via a regulator.

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Fpodpfxjxgdrbe Abgoh

Condition: like new (used), Year of construction: 2018, Refrigerated Dryer AIRPRESS APX 24 Capacity: 2.4 m³/min, Fjdpfx Asyy Ulzobgsph Year of manufacture: 2018 The dryer is fully operational.

Year of construction: 2008, condition: excellent (used), CONTEC-COMPRESSORS AIRPRESS APX 36 REFRIGERATION DRYER CAPACITY 3.6 M3/MIN, NET PRICE 3800,- GROSS PRICE 4674,- THE DEHUMIDIFIER IS FULLY OPERATIONAL. I HAVE MORE COMPRESSORS ON SALE SCREW-BASED REFRIGERATION DRYERS AND EQUIPMENT OF THE WELDER. Fpedpfofcp U Eox Abgsh CONTEC-COMPRESSORS

Year of construction: 2012, condition: like new (used), CONTEC-KOMPRESORYCONTEC-KOMPRESORY BLOCKERDS DW17,2012 PRODUCTION YEAR,2012 EFFICIENCY 2,8M3/MIN. FULLY RIGHT.NET PRICE 3100,- GROSS PRICE 3813,- I HAVE MORE REFRIGERATION DEHUMIDIFIERS, SCREW COMPRESSORS AND WELDING EQUIPMENT ON SALE.MORE INFORMATION TEL. 603 244 888, 726 244 888.CONTEC-COMPRESSORS Fsdpfx Ajd Syxtobgsph