Used Danfoss Vlt Mcc 101 for sale (1,281)

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Bjdpozizrkofx Acnedg Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm Bdodpey Aubujfx Acnjg hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: like new (used), functionality: fully functional, 2 new/unused crushing jaws for McCloskey J50c Original part no. 501-015-036-14 Wavy profile with 14% manganese Other parts, such as side plates, wedges, and fasteners, available upon request. Bdedpfx Acjzabfmjnjg

Condition: excellent (used), Heating boiler Viessmann Vitorond 100kw/6101/01 Bjdpjxq Hvqefx Acnedg

Condition: new, Year of construction: 2024, Model Type: Hammel, Arjes, Lindner Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metal construction company specializing in the manufacture of shredding tools for shredder machines with an attached welding shop. Our experienced team is proud to offer high-quality and customized solutions. We focus on quality, innovation and customer satisfaction to ensure that our products fully meet our customers' requirements. Bedpfxor Nf Rlo Acnodg Our customers come from various industries, including waste management, recycling companies and machine manufacturers. We maintain long-term partnerships and are happy to supply our products and services to companies looking for reliable and high-performance shredding solutions.

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Bdsdjx D Dihjpfx Acnsg Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Year of construction: 2011, operating hours: 3,800 h, condition: ready for operation (used), functionality: fully functional, McCloskey I54 impact crusher on tracks 2011 year 3800 genuine working hours on CAT C13 engine' 2900 crusher hours(new controller) Engine CAT C13 - 536 HP 53000 kg Inlet[mm]:up to 1200x1350 mm Max size of inlet materiał:800 mm CSS[mm]: 0-20 to 0-150 mm Capacity[t/h]: from 150 to 300 Feed hopper 6,8 m3 Fitted with overband magnet Fitted with prescreener Bsdpfx Acox Npv Honjdg Fitted with side conveyor 3-generator 31,5 kVA 400 V Wear plates 90% Blow bars 90% Machine in great working condition, can go straigt to work

Year of construction: 1999, condition: excellent (used), WIDE BELT GRINDER, 2 UNITS: CONTACT CYLINDER AND GRINDING WHEEL CYLINDER, HORIZONTAL GRINDER, CONTACT CYLINDER MOTOR 15 kW, GRINDING WHEEL CYLINDER MOTOR 7.5 kW, CONTINUOUSLY VARIABLE FEED RATE CONTROL. Bdodpjgrdx Ujfx Acnjg

Condition: used, functionality: fully functional, chain condition: 95 %, Year of construction: 2021, operating hours: 705 h, Equipment: UVV, For sale is our McCloskey S80 screening plant from 2021. The machine has only 705 operating hours and is therefore still very new: • Year of manufacture: 2021 • Operating hours: 705 hrs • Mobile screening plant for professional use • Robust design for tough applications. The plant is in very good condition and has been regularly maintained. It is perfectly suited for screening work in construction, recycling, or quarrying. If you are interested or have any questions, please feel free to contact us. Bodpeyg Slqefx Acnjdg

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Bedpfx Acoymcpyenjdg Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. Bdedpfx Acsu Rurusnog - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor Bdjdpfx Acoxlf Hwsnsg - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 5,000 mm, color: black, Equipment: lighting, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2100 kg. Driven via PTO shaft at 540 rpm. Bdedpfx Acex R Ul Njneg - Maximum horizontal reach: 5.00 m - Tractor-independent hydraulic system (46 l/min, 210 bar) incl. PTO shaft - Hydraulic collision protection - Hydraulic boom rotation - Floating position for boom - Floating position for mower rotor - Stabilization kit for three-point linkage - Electric proportional control with single joystick NEW machine, year of manufacture 2025

Condition: used, Year of construction: 2025, operating hours: 57 h, Colour: Grey Weight: 11.600 kg Price: On request Bjdpfx Acjx Npwwenedg - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 24111638 - Operating hours: 57 - Saw direction: Horizontal - Main motor power [kW]: 30.0 - Max. cutting height [mm]: 940 - Table length [mm]: 6000 - Table width [mm]: 1050 - Fuse [A]: 100 - Power [kW]: 51.0 - Transport weight [kg]: 11600kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), KUKA stator for 1FK7100-5AZ91 motor, serial number: YFW450691141013, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bedpjzx Nhrofx Acnedg

Condition: used, Siemens SIMATIC S7-1500 CPU 1510SP-1 PN 6ES7510-1SJ01-0AB0 Manufacturer: Siemens Product series: SIMATIC S7-1500 / ET 200SP Type: CPU 1510SP-1 PN Article number: 6ES7510-1SJ01-0AB0 Device type: PLC / CPU Program memory: 150 kB Data memory: 750 kB Interface: PROFINET IRT with 3-port switch Bodpfx Acszxrg Djnjdg Performance: 72 ns bit operation Supply voltage: 24 V DC SIMATIC memory card required: Yes

Condition: used, Available: 2 units Manufacturer: Siemens Model series: SINAMICS G120C PN Article number: 6SL3210-1KE11-8AF2 Bdodpfx Acjzxq D Usnsg Rated power, low overload: 0.55 kW Rated power, high overload: 0.37 kW Input voltage: 3 AC 380–480 V +10 % / -20 % Input frequency: 47–63 Hz Output frequency: 0–550 Hz Communication: PROFINET PN Line filter: Class A, integrated Safety function: Safe Torque Off (STO), integrated I/O interface: 6 DI, 2 DO, 1 AI, 1 AO, 1 motor temperature input Frame size: FSAA Degree of protection: IP20 / UL Open Type Weight: approx. 1.4 kg

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 00287, Technical specifications Manufacturer: brown & sharpe Type: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring range X = 1000 mm Bdodpei Dpggofx Acnjg Y = 1500 mm Z = 900 mm Measuring table Length = 2280 mm Width = 1145 mm The machine can be upgraded with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Changes and errors in the technical data, specifications, and prices, as well as prior sale, are reserved!)

Condition: good (used), Technical data Manufacturer: Carl Zeiss Type: SMC Control: C99 Bodpfst T R R Dox Acnodg Measuring range and further data on request. The machine can be modernized with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will be happy to provide you with a detailed quote. Note: Our offer is aimed exclusively at specialist customers. (Subject to changes and errors in technical data, specifications and prices and subject to prior sale)

Year of construction: 1986, condition: used, machine/vehicle number: 153, Technical data Manufacturer: Leitz Year of manufacture: 1986 Max. workpiece weight: 1000 kg Dimensions X = 1800 mm Y = 1000 mm Z = 1000 mm Accessories Measuring software: QUINDOS 7 Machine control: B1 control, serial connection COM The machine can be modernized with new software according to customer requirements. Price: on request! Installation and commissioning possible! Bdedpfx Ajc Ucbzocnsg We would be happy to prepare a detailed offer for you! Note: Our offer is exclusively aimed at specialist customers! (Changes and errors in the technical data, information, and prices, as well as prior sale, are reserved!)

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE • Manufacturer: Hüffermann Bedpfxewaap Ee Acnjdg • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet • Doors: twin-leaf • External colour: RAL 1226

Condition: excellent (used), ABB DSQC1000 or DSQC1018 main computer, 20% discount when ordering more than one unit. Bdedpfx Aszxbl Nscnog DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH was founded in 2005 in Gütersloh. Since 2015, GSG Robotics GmbH has been based in Marl, with a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: ready for operation (used), Kuka stator for 1FK7101-5AZ91 motor, serial number: YFVN50665657018, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bodjzw Syuepfx Acnsdg

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, Serial No.: 13546154A – complete overhaul and testing carried out professionally, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Bjdpfxszw Sy Ie Acnedg

Condition: ready for operation (used), Heidenhain UVR 140D power supply unit, ID: 390 281-01, serial number: 13546154A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Bjdpfx Acozw Sy Usnedg Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €600.00 including VAT will be applied. Attention: You are bidding on a Heidenhain UVR 140D inverter, ID: 390 281-01, serial number: 13546154A, in exchange (exchange service). It has been professionally completely overhauled and tested, and comes with a 3-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €600.00 including VAT will be issued.