Used Danfoss Vlt 5004, 175Z0049 for sale (332)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h Gsdoz E Nh Nopfx Angjuh M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, mileage: 597,013 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, Leaf spring air suspension, differential lock, disc brakes, sun visor, twin tires, used vehicle. Vehicle no. 3398, MFL, automatic transmission, refrigerator box, 1 bed, automatic climate control, retarder, tire size front axle: 385/65R 22.5, rear axle: 315/80R 22.5, differential lock, leaf spring air suspension, auxiliary drive, tilting hydraulics, sun visor, unladen weight: 7,693 kg, gross weight: 18,000 kg, hill start assist. For inquiries, please contact or . Subject to errors and prior sale. Gusdpfx Anjzth D Uogoh

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version Guedpfxsyg I Ihs Angeh • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 38,900 mm, total length: 9,800 mm, · Drehung 360 Grad (durchgehend) · Nennleistung 175 kW (238 PS) bei 2.300 U/min Gjdpfxoxd E Npj Angsuh · Max. Drehmoment 975 Nm bei 1.380 U/min · Hubraum 5,13 l · Zylinderzahl 4 in Reihe · Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung · Kühlanlage Wassergekühlter Ladeluftkühler · Antrieb: Hydrostatisch · Modell Danfoss / Rexroth · Max. Druck 480 bar · Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. · Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt · Typ Achsen mit Planeten-Endantrieben · Hinterachse Lenkende Pendelachse mit hydraulischer Sperre · Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad · Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt · Feststellbremse Negativbremse, hydraulisch betätigt · Reifengröße 445/65 R22,5 · Max. Fahrgeschwindigkeit 40 km/h · Max. Zugkraft am Lasthaken 152 kN · Steigfähigkeit 65% · Wenderadius (mit Gabelzinken) 6.970 mm · Dieselkraftstoff 270 l · AdBlue 40 l · Motoröl 16 l · Kühlflüssigkeit 40 l · Max. Betriebsdruck 350 bar · Anlagentyp Load sensing · Betriebspumpe Danfoss / Rexroth - Verstellpumpe · Verteiler für Ausleger- und Oberwagenbewegungen Danfoss - Elektroproportionalventil SIL 2 · Verteiler für Stützen Bosch Rexroth - Elektrohydraulische Aktuatoren · Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: used, mileage: 560,750 km, power: 375 kW (509.86 HP), first registration: 06/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Cab & Comfort* Cab: FH Globetrotter High Sleeper Cab (high roof, sleeper cab) * Seats: Leather seats with black & gray leather inserts, driver's seat luxury (air-suspended, heated, ventilated, electrically adjustable with memory), passenger seat comfort rest seat (rotatable, reclining) * Air conditioning: Automatic temperature control with sun sensor * Auxiliary heater: Cab auxiliary heater 2 kW * Cool box: 33 l with freezer compartment under the bed * Mattress: Pocket spring mattress, firm, with premium mattress topper * Windows: Electric windows (driver's side with automatic function), tinted windows * Storage space: Storage space under the bed, two open storage compartments, bottle holders at the rear of the bed frame * Leather armrests, leather handles, writing pad for the steering wheel, vanity/shaving mirror ----Multimedia & Infotainment * Media/infotainment: Basic system with Bluetooth (for two phones), 7'' touchscreen * Audio: Radio with multi-format (touchscreen) * 8 speakers, tweeters in the dashboard * USB and AUX connection * Integrated hands-free system * Displays: Driver information display (4''), second 9'' touch color display * Telematics: Telematics gateway with 3G and WLAN, TV/infotainment * Central locking with remote control * Cab suspension: Air suspension in the rear, mechanical in the front ----Lights & Visibility* Light package Plus * Bi-Xenon headlights * LED daytime running lights (V-shaped) * LED fog lights * LED taillights * Headlight cleaning system * Marker lights at the rear and on the sides * Fifth wheel coupling lighting (LED white) * Interior lighting with dimmer and red night light * Rain sensor for windshield wipers * Rear view camera: Digital, heated lens, automatic lens protection, preparation for additional camera * Sun visors: Internal electric, side driver's side, external * Batteries: Battery indicator in the display Gsdpfezrrh Isx Angouh ----Safety & Assistance Systems* Airbag: Driver airbag in the steering wheel * Active safety: Active Safety package * Adaptive cruise control (ACC) with collision warning * Emergency braking function * Lane keeping assist * Lane change assist * Driver alert system (fatigue detection) * Immobilizer: Transponder in the key ----Engine & Drive* Engine: 6 cylinders, 12.8 l displacement, 510 hp/375 kW, 2,550 Nm, Euro 6 with SCR, particulate filter and exhaust gas recirculation * Transmission: I-Shift AT2612F, automated 12-speed transmission (direct gear) * Electronically controlled braking system (EBS), ABS, ESP * Automatic impulse parking brake * Engine brake VEB+ * Air suspension: Front and rear axles, electronic level adjustment, three ride heights * Brakes: Disc brakes ----* Fifth wheel coupling: Height-adjustable, Jost JSK 37, plastic sliding plate -----* Tire dimension front axle: 355/50R22.5 * Tire dimension rear axle: 295/60R22.5 * Fuel tank: 475 + 445 l * AdBlue tank: 65 l * Technically permissible total weight: 19000 kg * Curb weight: * Permissible trailer load: * Overall length: * Wheelbase: 3700 mm * Inspection due: ----Vehicle number: 12372----Errors and prior sale are subject to change----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection, complete export processing, ar

Condition: good (used), Double hose reel, reel, hydraulic hose reel, hose reel -Manufacturer: Hans H. Meyer, double hose reel from electric forklift Still EFG 1.5/5004 -Type: 7-21 Guodstzrfljpfx Angeh -Dimensions: 280/200/H280mm -Weight: 9 kg

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Godpfx Ajyab Nfjngeuh

Condition: used, mileage: 87,906 km, first registration: 06/2025, Equipment: had accident, Engine: 13L, 510 hp / 375 kW with turbo compoundcharger, 2,856 Nm, Euro 6 with SCR, Transmission: AT2812F, 12-speed I-Shift, Engine brake: VEB+ with compact retarder, Wheelbase: 3800mm, Axle ratio: 2.31:1, Long/extra-high safety cab: Globetrotter XL, Parabolic suspension front, 2-leaf (normal hardness), Front axle load: 7.5t, Rear axle load: 13t, Stabilizer rear: normal, Three ride heights for air suspension, Disc brakes, EBS, ABS, ESP, Adaptive cruise control (ACC) with collision warning and emergency braking function, Emergency braking assistant: not deactivatable, Lane keeping assistant: deactivatable, Side collision avoidance and turning assistant (on both sides), Driver warning system, 8 speakers, Radio AM/FM and DAB/DAB+, Rear view monitoring/camera, Battery box at the rear overhang, 1 folding chock, Spoiler kit on the cab, Roof spoiler, Side spoilers, Battery box in the rear overhang, Two aluminum tanks (900l left, 710 mm high with steps in the side paneling and 405l right, 710 mm high, 1030 mm long), 900l AdBlue tank right, LED taillights, Brake lights with emergency braking flashing sequence, Tires front: 315/70R22.5, Tires rear: 315/70R22.5, No jack, Without spare wheel, Fuel package for long-distance transport I-See with map-based topographic information (high resolution), Cruise control with ECO function, Air deflector/spoiler kit, Edge extension, Folding, removable side panel, Roof spoiler, Side under-run protection, Foldable and removable, Driver comfort package: heated and electrically adjustable exterior mirrors, Wide-angle mirrors on both sides, Ramp mirror on the passenger side, Sun visor outside, Air conditioning with automatic temperature control and sun sensor, Two armrests on the driver's seat, Roof window and emergency exit manual, Media/infotainment system with navigation, Second driver information display, 9-inch touch color display, Load/axle load display in the vehicle display, Light package Plus, Rain sensor, LED headlights with automatic beam leveling, Headlight cleaning system, Static cornering lights, Automatic light switch, Electric windows, Side sun visor driver side, Inner sun visor manual roller blind, Driver's seat: comfort, air-suspended, Passenger seat: standard, 2 bunks, Parking heater cab, I-ParkCool (integrated parking air conditioning), Cool box with freezer compartment 33l under the bunk, Additional thermal insulation of the rear and side walls of the cab, Tinted windows, Central locking, Daytime running lights LED, 2 LED fog lights, Preparation for CB radio, Fifth wheel coupling: Jost JSK 42, 160mm above the frame, Fifth wheel dimension +550mm, Fifth wheel coupling lighting: LED, Working platform, Trailer recognition with LED sensor. Guodpfez Iflisx Angjh

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Gujdpfxsyab I Ue Angoh

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 20,800 mm, fork length: 1,200 mm, total length: 7,760 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg Gjdsy Hmg Depfx Angsuh - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l Gsdsydqv Nspfx Angjuh - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Gujdpfswllmmjx Angsh Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: excellent (used), Year of construction: 2009, operating hours: 3,645 h, clamping force: 2,500 kN, screw diameter: 35 mm, Arburg 1500T 2500-400/400/290 3K injection molding machine (235) Number: 235 Availability: in stock Year of production: 2009 Producer: Arburg Gjdpfxjw Hx Uys Angeuh Injection molding machine condition: used Screw diameter [mm]: 35, 40 Closing force [kN]: 2500 Plate size [mm]: 1500 Working hours [h]: 3645 Weight [kg]: 11200

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) Gjdpfx Anoyg I Egsgouh • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Gujdpfoyxa Dtjx Angjh Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 380.9 kW (517.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,147 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,350 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE CGAM140 380.9 KW Cooling capacity: 380.9 kW / 108.3 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHN315 (scroll) + 2 pcs. Danfoss CSHN250 (scroll) Type of refrigerant: R410A Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo, buffer tank 762 l, expansion vessel 60 l. Dimensions: 5.35x2.3x2.45 m Weight: 4147 kg Working hours: 7343/3545/6326/7990/5866/6489 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Gujdpfszqzrgox Angeh After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 362,558 km, power: 375 kW (509.86 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort Cab: Globetrotter safety cab FH (High Sleeper Cab, height 215 cm, length 205 cm) * Living Package: One bed, fold-down lower bunk (2000x815/740/660 mm) with safety net, pocket spring mattress * Air conditioning: Automatic temperature control with sun sensor * Auxiliary heater: Cab, 2 kW * Cool box: 33 liters with freezer compartment under the bunk * Interior: Seats in fabric (blue/dark blue), interior in gray fabric, armrests with vinyl, two armrests on the driver's seat * Driver's seat: Comfort, air-suspended, heated, seatbelt integrated * Passenger seat: Standard, non-suspended * Curtains: On windshield and windows * Storage compartments: Above the bunk (245 liters), storage space under the bunk * Vanity/shaving mirror * Shift console (luxury) on the bunk: Controls for lights, heating/air conditioning, sunroof, door, alarm clock, windows, and radio * Writing board for the steering wheel ----Infotainment & Connectivity Instruments: Digital 12'' driver information display * Second 9'' touchscreen color display * Audio: Multi-format, 8 speakers, tweeters, AM/FM, USB port (3-way) * Navigation: Info and media package with navigation, map region Europe Godpfx Aoztih Iongeuh * Instruments High: Digital 12'' driver information display, traffic sign recognition (in conjunction with LSS-DW), chrome bezel * Telematics: Telematics gateway with 4G * Various software services (e.g., Alexa Built-In, Android Auto, TomTom Navigation App) * Immobilizer: Transponder in the key * Central locking with remote control * Tachograph: Digital, Generation 2 ----Driver Assistance: * Lane keeping assistant * Collision warning with emergency braking function * Camera monitoring of the passenger side at the front * Traffic sign recognition * Brakes: Disc brakes * EBS (Electronic Braking System), ABS * ESP (Electronic Stability Program) ----Lights & Visibility: * LED headlights with adaptive high beams * Automatic light switching between daytime running lights and low beams via light sensor * Static LED cornering lights * Daytime running lights LED, "V-Light" * LED fog lights * LED taillights * Headlight cleaning system * Rain sensor * Light and visibility package Superplus * Two work lights at the rear top of the cab, LED * Mirrors, heated and electrically adjustable with close-range camera on the passenger side * Exterior sun visors * Aluminum rims Dura-Bright EVO, chrome rings ----Engine, Transmission & Technology Engine: Diesel engine D13K500, 12.8 l, 510 hp / 375 kW, 2,550 Nm, Euro 6 with SCR, particulate filter, and exhaust gas recirculation * Engine brake, exhaust pressure regulator (incl. engine control for I-Shift) * Transmission: I-Shift AT2612F, automated 12-speed transmission (direct gear) * PTO PTR-FH (fast), transmission-side, connection: 1 SAE flange at the rear (600 NM) * PTO functions for I-Shift, basic * Compact retarder, transmission-mounted (rear) with medium oil, braking power: 450 kW * Suspension: Air suspension at the rear, parabolic suspension at the front, electronic level control * Differential lock, rear axle ----Exterior & Structure Fifth wheel coupling: Jost JSK 37, fifth wheel coupling height 150 mm + substructure, central lubrication * Extension element for work platform * GHH Rand CS 700 Light R-PTO L compressor ----* Tire dimension front axle: 315/80R22,5 * Tire dimension rear axle: 315/80R22,5 * Fuel tank: 650 liters * AdBlue tank: 100 liters * Technical total weight: 21,000 kg * Tare weight: 7,882 kg * Wheelbase: 3,800 mm * Inspection

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 261 kW (354.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,564 kg, input voltage: 400 V, total width: 2,260 mm, total length: 2,420 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RBP 260 0014 PE 261 KW Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum. Gsdpfxezxnfio Angouh Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. (Frequency inverter) Dimensions: 2.42x2.26x2.3 m. Weight: 1564 kg. Working hours: 602/592/1937/1912 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area Gsdsvvl Ugjpfx Angouh • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: used, mileage: 368,663 km, power: 368 kW (500.34 HP), first registration: 02/2018, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2024, brakes: retarder, color: black, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), had accident, * Engine damage Gusdpfxowta Ego Angoh * Chassis number: JM763913 * Multifunction steering wheel * Manual transmission * Cool box * Stationary air conditioning * Navigation system * 2 sleeper bunks ----* Front tyres 385/65R22.5 * Rear tyres 315/80R22.5 * All-wheel Hydro Drive * TÜV valid until 03/2024 * SP until 10/2023 ----Internal vehicle number: 10839-----Errors & prior sale reserved WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us via WhatsApp Whatsapp Whatsapp

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,580 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,340 mm, total height: 2,290 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA NX2 G06 Y 0294T 270 KW Cooling capacity: 270 kW / 76.77 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 4 pcs. DANFOSS DSH295A4APC (scroll) Type of refrigerant: R454B Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3 Dimensions: 4.34x2.25x2.29 m. Weight: 2580 kg. Working hours: 6233/6233/6233/6233 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Gedpfx Aszxdcdsngeuh The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 233,692 km, power: 368 kW (500.34 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 7,900 kg, maximum load weight: 10,100 kg, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,000 mm, total width: 2,550 mm, total height: 3,800 mm, operating hours: 5,717 h, number of cylinders: 6, displacement volume: 12,419 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, USB port, central locking, differential lock, electric window regulation, electronic stability program (ESP), lane keeping assist, navigation system, parking heater, power mirror, retarder, seat heater, Key Features Internal Reference: 26264M Chassis Number: WMA 06X ZZ6 KM8 244 80 Serial Number: 161.227.432 Vehicle Model: TGX 18.500 4x2 Tipper Hydraulics / Swiss Vehicle Vehicle Make: MAN Product Category: Standard Used / New / Demo: Used Mileage: 233692 Hours: 5717 Emission Standard: Euro 6 Date of First Registration: 26.03.2019 Last Roadworthiness Test (MFK or TÜV): 27.08.2025 Fuel Type: Diesel Engine Displacement (ccm): 12419 Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Suspension: Steel-Air Hydraulic System: Tipper Hydraulics Retarder / Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, Electric Windows, Electric Mirrors, ESP, Navigation System, Radio, Seat Heating, Lane Keeping Assist, Auxiliary Heater, USB Interface, Central Locking Cab Size: Sleeper Cab Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Gjdez Hph Sjpfx Angeuh Axle Configuration: 4x2 Axle 1: 315 / 70 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Axle 2: 315 / 70 R 22.5/8mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight (GVW): 18000 Gross Train Weight: 40000 Payload: 10100 Unladen Weight: 7900 Vehicle Height: 3800 Vehicle Length: 6000 Vehicle Width: 2550

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 181 kW (246.09 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,913 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,460 mm, total height: 2,370 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RB0182 B0394 PE 181 kW Cooling capacity: 181 kW / 51.47 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. DANFOSS SH300B4ACC (scroll) + 2 pcs. DANFOSS SH240A4ACE (scroll) Type of refrigerant: R410а Number of fans: 4 pcs. Hydraulic module: 2 pcs. water pump WILO DPL65/130-4/2, expansion vessel. Dimensions: 2.46x2.3x2.37 m. Weight: 1913 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Gujdpfx Aozwvmfengjh Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 508,451 km, power: 368 kW (500.34 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 8,315 kg, maximum load weight: 9,685 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, next inspection (TÜV): 05/2027, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,950 mm, total width: 2,550 mm, total height: 4,000 mm, number of seats: 2, Equipment: additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, navigation system, onboard computer, seat heater, Vehicle location: Bovenden, long cab, high roof, 1 air suspension seat, 1 bunk, heated seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, CB radio, cruise control, telephone preparation, navigation system, constant throttle, tilting hydraulics, automatic transmission, lifting and lowering, differential lock, long-range headlights, work lights, leaf-air suspension, green environmental badge. Gujdoz Hxqvspfx Angsh Wheelbase: 3600 mm, body: HYDRODRIVE, tilting hydraulics, multi-function steering wheel. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 399,000 km, power: 375 kW (509.86 HP), first registration: 09/2018, fuel type: diesel, overall weight: 18,000 kg, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Equipment: soot filter, tail-lift, Lifting platform: ----- VEB+- Air conditioning- Full air suspension- Trailer hitchSuspension: Godpfxjxq Sw Ho Angeuh Air suspension