Used D-Tec Tanker Semitrailer for sale (51,102)

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into double chamber tea bags. Including Volume dosing unit and tag system. Tag system: stapled (label-thread and thread-bag). Forming the double chamber bag by cold sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 130 cycles per minute; dosing volume: max. 10 cm³ (adjustable); hopper capacity: 13 dm³; accuracy: ±5%; tea bag dimensions LxW: 40x60 / 45x60 mm; roll width tea bag material: 94 / 103 mm; suitable tea bag material: 12.5g/m², cold-sealable; label (LxW): 28x32 mm; thread length: 148 mm (±5 mm); material diameter staples: 0.5 mm; power supply: 220/380V; power consumption: 10kW; compressed air required: 0.6 MPa; compressed air consumption: 300l/min; machine dimensions LxWxH: 3500x1500x2400 mm; weight: 4250kg. Gujdov Nm S Tepfx Afroh

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing 3-side OR 4-side seal bags. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min; bag sizes: L(40-210)xW(60-160)mm, (double film pulling possible for longer bags); suitable film width: 120-320mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 2.4kW; air pressure: 0.2-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1326*1066*1503mm; weight: 450kg. Gedpev Nnf Iofx Afreuh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine for making Doypacks or flat bags with zipper or without. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min; bag sizes: L(120-235)xW(60-200)mm; suitable film width: 280-520mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 3.9kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.7m³/min; dimensions (LxWxH): 2090*1820*1935mm; weight: 800kg. Gsdpfx Aov Nngfsfrsuh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm; suitable film width: 240mm; suitable film: mono-material or laminated, heat sealable; dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L700xW600xH1600mm; weight: 280kg. Godpfx Afsv Nnhcorjuh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertikale Verpackungsmaschine mit Schneckendosiereinheit für Pulver. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit Rückennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung über Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm; suitable film width: 240mm; suitable film: mono-material or laminated, heat sealable; dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L600xW720xH1590mm; weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Guodpfev Nnhisx Afrsh

Year of construction: 2025, condition: new, Vertikale Verpackungsmaschine mit Kolbenpumpe für das Dosieren von Flüssigkeiten. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit Rückennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung über Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm; suitable film width: 240mm; suitable film: mono-material or laminated, heat sealable; dosing range: 1-100ml; max. speed of the machine in neutral: 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; dimensions: L700xW600xH1720mm; weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Guedpfov Nnhpjx Afrjh

Condition: new, Year of construction: 2025, Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml; volume of hopper: 30L; number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Gujdov Nnlnepfx Afrjh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml; volume of hopper: 30L; number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gusdpfx Asv Nnluofrsh

Condition: new, Year of construction: 2025, Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml; volume of hopper: 30L; number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Guodpfx Afjv Nnlzereh

Year of construction: 2025, condition: new, Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 3-500g; filling hopper capacity: 30 liters; hopper with side opening; stainless steel 304 design; power supply: 220~415V; power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gusdpfxjv Nnmfs Afreh

Year of construction: 2025, condition: new, Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g; filling hopper capacity: 50 liters; hopper with side opening; stainless steel 304 design; power supply: 220~415V; power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gsdpfev Nnmrjx Afrsuh

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Guodpfswnrt Sex Afrjh Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Year of construction: 2003, condition: good (used), Product Description:  Web width: max. 10 inch – 254mm  1x die cutting unit  1 x inking unit UV Flexo 1-color with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: _____ Gjdpfx Afsv Ubfxsrjuh Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. Gsdpfx Aez D S Ezjfrjuh 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Guedpfezu R Tujx Afreh Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Gjdpfszu R T Isx Afreuh Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Godpezughbsfx Afreuh Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: like new (used), functionality: fully functional, mount diameter: 45 mm, Selling approximately 60 various used, some new, and original-packaged tool holders, suitable for a Spinner TTS machine with a BMT45 tool interface, for example. Guedpfezv Rdpex Afrjh All tool holders are from the brand HEIMATEC. 8 209 02 003 1x New, in original packaging 8 240 08 021 1x New, in original packaging 8 240 08 057 2x New, in original packaging 8 010 45 126 6x 4 x new, with packaging / 2 x new, without packaging 8 039 45 090 4x 2 x new, with packaging / 2 x new, without packaging 8 030 45 262 2x New, without packaging 8 010 45 127 5x New, in original packaging The list only shows the new tool holders. There are also approximately 40 used tool holders of various designs, but all with a BMT 45 interface. Please take a look at the pictures.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,600 mm, feed length X-axis: 560 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 200 kg, grinding height: 400 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 1 m/min, grinding wheel diameter: 200 mm, distance table to spindle center: 450 mm, table speed: 25,000 mm/min, table length: 520 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 2,850 rpm, spindle speed (min.): 2,850 rpm, overall weight: 950 kg, distance stand to spindle center: 300 mm, table height: 700 mm, grinding spindle motor power: 1,500 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 1 m/min, travel distance X-axis: 560 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 2,850 rpm, grinding spindle speed: 2,850 rpm, distance table to quill: 450 mm, warranty duration: 12 months, grinding wheel speed: 2,850 rpm, input voltage: 400 V, disc diameter: 200 mm, control cabinet length: 600 mm, control cabinet width: 400 mm, control cabinet height: 1,200 mm, space requirement height: 2,500 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! SURFACE GRINDING MACHINE SGA-2550AHD WITH PLC CONTROL The SGA-2550AHD Surface Grinding Machine is a professional machine designed for precision grinding of flat surfaces in tool rooms, production facilities, and metalworking workshops. Equipped with a modern PLC control system, an electromagnetic chuck, and high-quality components, it delivers outstanding grinding accuracy, excellent repeatability, and reliable performance. Its rigid machine construction minimizes vibration, ensuring exceptional surface finish quality and long-term stability. The SGA-2550AHD is ideal for machining tool steel, structural steel, cast iron, and other materials requiring precision surface grinding. Main Features • PLC control system • Electromagnetic chuck • High grinding accuracy and repeatability • Heavy-duty machine construction • Professional coolant system Gedpfx Afezd U Eyereuh • Simple operation and programming • Excellent surface finish • CE certified Precision Grinding The machine is equipped with a 250 × 520 mm working table and a 250 × 500 mm electromagnetic chuck, providing secure workpiece clamping and high machining precision for both single-piece and production work. PLC Control System The integrated PLC control system enables quick parameter adjustment, improves productivity, and ensures consistent machining quality. It is suitable for both individual jobs and serial production. Standard Equipment • Coolant tank • Electromagnetic chuck • Balancing arbor • Wheel flange • Wheel extractor • Leveling wedges and bolts • Tool box with service tools • Standard grinding wheel • Working lamp • Wheel dresser stand Included Optional Equipment • Full machine enclosure • Magnetic separator • Dust collection system • 2-axis digital readout (DRO) • Built-in electromagnetic chuck controller • Wheel balancing stand • Diamond dresser Technical Specifications • Model: SGA-2550AHD • Working table size: 250 × 520 mm • Electromagnetic chuck: 250 × 500 mm • Control system: PLC Applications • Tool rooms • Manufacturing plants • Metalworking workshops • Tool steel grinding • Structural steel machining • Cast iron machining • Precision engineering and component production Safety The machine is equipped with all required safety systems in accordance with European standards. The robust construction, protective guards, and CE certification ensure safe, reliable, and long-lasting operation. Transport & Delivery We offer professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is carefully loaded, securely protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying high-quality equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Guodpfx Aozaum Dsfrjh Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 50 kg, input voltage: 115 V, type of input current: AC, laser power: 100 W, type of cooling: air, total width: 450 mm, total height: 853 mm, total length: 806 mm, working range: 150 mm, overall weight: 92 kg, warranty duration: 24 months, height adjustment type: electric, space requirement height: 1,080 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, Equipment: cabin, The SpeedMarker 330 is the compact desktop laser from the SpeedMarker series, designed for users who want to laser mark small to medium-sized batches efficiently, reproducibly, and close to production. Unlike many standard workstations, the SpeedMarker 330 relies on clearly defined software workflows instead of complex machine configurations. As an industrial laser marking system, it combines galvo high-speed technology, a 100 W MOPA fiber laser (1064 nm), and the Ruby® laser software into a powerful production system that can be easily integrated into your workflow. The SpeedMarker 330 stands for standardized, controllable marking processes – without the complexity of customized systems. Key features: Godpfjzcc Uzsx Afrouh The SpeedMarker 330 Black Line combines advanced fiber laser technology with high marking speed, making it the ideal solution for industrial marking, traceability, and product customization. Its powerful 100 W laser source enables fast and precise marking on metals, plastics, and coated materials, thus maximizing productivity in demanding production environments. The intelligent autofocus technology automatically compensates for different component heights, reducing setup times while ensuring consistently high marking quality across various applications and batch sizes. The powerful galvo system offers exceptional speed and accuracy, producing sharp text, detailed graphics, barcodes, QR codes, and serial numbers with excellent repeatability and high contrast. The intuitive software for marking, with support for common industry-standard file formats and variable data, enables quick job setup, while real-time visualization and simulation help optimize workflows and avoid errors before production begins. Thanks to its compact, ergonomic design, the SpeedMarker 330 Black Line can be used as a standalone workstation or seamlessly integrated into automated production lines, offering flexibility, reliability, and efficiency for industrial marking applications.

Condition: excellent (used), functionality: fully functional, This flat belt conveyor originates from a cleanroom environment and features a PC cover and cooling fan. The conveyor belt speed is adjustable! Godpezyggzofx Afreuh A drawing with the dimensions can be found in the images.

Condition: excellent (used), Conveyor belt from a cleanroom production environment. In very, very good condition. Godpfx Afjzykr Isrjuh

Condition: used, Granutech-Saturn Model 80 Grizzly – 300 HP – Tire Shredder/Grinder For sale: Granutech-Saturn Model 80 Grizzly, a heavy-duty industrial shredder/grinder. Basic specifications: Manufacturer: Granutech-Saturn Systems Corporation, USA Model: Model 80 Grizzly Main motor power: 300 HP / approx. 224 kW Main power supply: 416 VAC / 50 Hz / 3-phase Control power: 110 VAC Application: secondary shredding/grinding of pre-shredded tires and rubber Suitable for further size reduction and preparation of material for granulation The machine was previously part of a complete tire recycling line Location: Poland, near Poznań The machine can be sold separately or together with other equipment from the complete tire recycling line. Gedpfezyplmex Afrsuh More photos and technical information are available upon request. Inspection can be arranged.

Year of construction: 2001, condition: used, Max. drum length: 7,500 mm Max. saw blade diameter: 550 mm Control E 550 Swiveling inside and outside motorized up to 140 degrees at both units (3-axis machine) Godpfx Afjzzmixsrsuh Pneumatic tilting of the angle between 45 and 90 degrees with digital angle display Minimum quantity spray device Machine is loaded free