Used Cronosstech H-Type 800/270 Ton Hydraulic Deep Drawing Press for sale (91,409)

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position Kedpfx Akjyz Dr Tsxsdk - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm Ksdeyz Dgwepfx Akxsdk distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: excellent (used), pressure 16 t weight of the machine ca. 16 t Kodpsyrhmhefx Akxsdk

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t Ksdpfsyn R Eljx Akxjdk The machine was overtaken 1999.

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm Kdsdpfxoyn R Efe Akxjk stroke 1100 mm distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm Kdsdpfx Asyn R D Uskxok die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic weight of the machine ca. 280 t The machine was overtaken 1999.

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm Kjdpfx Asyn R D Iekxsdk distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t Ksdpfsyn R Dzsx Akxjdk stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm Kjdoyn R Duopfx Akxsdk distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1973, pressure 1000 t distance between columns 4150 mm stroke 1200 mm distance table/blankh.,max. stroke up,adjustm. up 2100 mm table surface area 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 300 mm die-cushion pressure in pusher 100 t stroke of drawing cushion in pusher 150 mm ram surface 4000 x 2200 mm Kdjdpfx Asynmm Sekxok column travel -side 1300 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled Cut Shock absorption hydraulic Control Siemens S7 height over floor 7,7 m total power requirement 300 kW weight of the machine ca. 280 t dimensions of the machine ca. 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the seller before dismantling

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t Kodpfx Aeynmmxjkxjdk stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm Ksdpfx Aksynmmroxsdk die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm Kdedpfx Aeynbdfekxok ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm Ksdpfx Akjynbc Ijxsdk stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Year of construction: 2016, condition: used, functionality: fully functional, Hydraulic Sawdust Briquetting Press PRODECO E60S Specification: • Condition – machine in excellent, perfectly maintained, 100% original Kdodpfey Ddp Rjx Akxek • Manufacturer – PRODECO • Model – E 60 S • Briquette diameter: 60 mm • Motor power: 9.2 kW • Operating hours: 1,470 h • Hopper capacity: approx. 785 L (Diameter – 100 cm, Height – 100 cm) • Throughput, depending on processed material: 50 to 100 kg/h • Control: SIEMENS LCD, fully automatic, maintenance-free operation • Year of manufacture: 2016 • Weight: 770 kg • Overall dimensions: 180 x 120 x 160 cm (W x L x H) Additional information: • Machine is in perfect technical condition, ready for immediate operation • Provided photos show the actual condition of the item for sale • Possibility to start up and test the machine onsite • Free operator training (at company headquarters) • Price listed in the auction does not include VAT or transport costs Financing & Transport: • We organize transport via our MDD fleet, courier companies, or external carriers • Financial support available through leasing or lease loans

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Kdjdpfxjra Dddj Akxsk Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features: - Large loading opening for cardboard - Possibility of automatic feeding (e.g. via conveyor) - Manual tying with wire (4 wires) - Pallet lock and hydraulic doors for bale removal Advantages of this press: - Large bales, fewer transports - High pressing force - Designed for continuous operation Available years: 2016–2020 Baler from 2016 without tipper

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, Press Characteristics Ksdpsytdl Ajfx Akxjdk open back design fixed table crankshaft mounted transversely friction clutch rigid and durable machine construction horizontally mounted crankshaft dry pneumatic clutch lifting balance device safety valves manual control adjustable stroke Technical Specifications Press force: 40 t Stroke under nominal load: 6 mm Slide stroke: 120 mm Number of strokes: 55 strokes/min Max. die set height: 220 mm Die height adjustment: 80 mm Throat depth: 260 mm Working table width: 480 mm Working table length: 710 mm Working table thickness: 80 mm Table hole diameter: Ø180 mm Bed opening dimensions (diameter × front–back × left–right): Ø200 mm × 150 mm × 300 mm Slide bottom surface width: 270 mm Slide bottom surface length: 320 mm Max. body inclination angle: 25° Distance between columns: 300 mm Punch hole diameter: Ø50 mm Punch hole depth: 70 mm Motor power: 4 kW Overall dimensions (W × L × H): 1600 × 1180 × 2310 mm Weight: 3580 kg Equipment light curtains mechanical guards ejector in the lower table Delivery Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Press Characteristics open back design fixed table crankshaft mounted transversely friction clutch rigid and durable machine construction horizontally mounted crankshaft dry pneumatic clutch Kjdpfx Asytcvgjkxedk lifting balance device safety valves manual control Technical Specifications Press force: 25 t Stroke under nominal load: 3 mm Slide stroke: 10 – 110 mm Number of strokes: 80 – 120 strokes/min Max. die set height: 250 mm Die height adjustment: 50 mm Throat depth: 210 mm Distance between frame columns: 450 mm Working table width: 700 mm Working table length: 400 mm Working table thickness: 80 mm Table hole diameter (outer): Ø170 mm Table hole depth: 20 mm Table hole diameter (inner): Ø150 mm Slide bottom surface width: 360 mm Slide bottom surface length: 300 mm Punch hole diameter: Ø40 mm Punch hole depth: 60 mm Motor power: 3 kW Overall dimensions (W × L × H): 1460 × 950 × 2380 mm Weight: 3100 kg Equipment light curtains mechanical guards ejector in the lower table Delivery Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Ksdeyr Ek Repfx Akxjdk Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Kdodpfx Akeyrr Rkoxok Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, Eccentric Press – 16 Ton Capacity Press Characteristics open back design fixed table crankshaft mounted in a transverse direction friction clutch rigid and durable machine construction horizontally mounted crankshaft dry pneumatic clutch lifting balance device safety valves manual control Technical Specifications Pressing force: 16 t Stroke under load: 2 mm Slide stroke: 0–70 mm Number of strokes per minute: 125 min⁻¹ Maximum die height: 170 mm Distance from slide block to frame: 170 mm Kdedpfxeyrr E Ie Akxjk Working table dimensions (W × L): 320 × 480 mm Diameter of hole in the worktable: Ø100 mm Opening dimensions (W × L × Ø): 160 × 240 × Ø210 mm Slide dimensions (W × L): 180 × 200 mm Shank hole size (Ø × depth): Ø40 × 60 mm Distance between columns: 220 mm Table thickness: 60 mm Maximum tilt angle: 25° Motor power: 1.5 kW Machine dimensions: 1150 × 900 × 1910 mm Weight: 1400 kg Equipment light curtains mechanical guards ejector in the lower table Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity Kdedpjyztnwjfx Akxsk 6,000mm distance between frame 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 480,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns 1,600 mm length of ram stroke 200 mm/s ram speed 12 mm/s pressing speed Kdjdjyzr Hfopfx Akxjk 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,280 mm, total height: 2,700 mm, total width: 2,000 mm, overall weight: 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Ksdpfx Ajyttbmokxedk Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, The press brake is designed for bending sheet metal. During the ram stroke, the sheet can be bent and formed to the required geometric profile. The machine can be used in many industries, including electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive industry, aerospace industry, and many others. Technical data Maximum sheet thickness: up to 6 mm Press force: 125 t Maximum bending length: 3200 mm Distance between columns: 2700 mm Throat depth: 320 mm Ram stroke: 120 mm Maximum opening height: 390 mm Back gauge travel: 600 mm Motor power: 7.5 kW Weight: 7500 kg Dimensions (L × W × H): 3870 × 1550 × 2400 mm Equipment Tools Front supports: 2 pcs Back gauge adjustment (X axis): servo drive Beam adjustment (Y axis): servo drive Back gauge finger height adjustment (R axis): manual Punch clamping system: AMADA-type quick clamping Controller: MTP-3212 The CNC controller features an intuitive and user-friendly menu. The software automatically calculates the bending angle. Possibility to store up to 40 punch types. Large color touchscreen display readable from any angle. High-quality components High-quality German Rexroth hydraulic valves Electrical components from Schneider Electric Safety components from Omron and Schneider Steel hydraulic connections The use of steel hydraulic connections significantly reduces the risk of leaks in the future. Ergonomics Thanks to the mobile controller and the control panel mounted on a movable arm, the operator can work flexibly across the entire working area of the machine. Additional LED lighting ensures excellent visibility of the workpiece in all conditions. Discover a new level of comfort and efficiency with our innovative solutions. Kdjdjytp N Hepfx Akxjk Safety Our press brakes are designed with maximum operator safety in mind. They are equipped with: clearly visible markings side guards rear safety gate easily accessible emergency switches light curtain preventing accidental access of hands between the punch and die during operation The machine is supplied with a Polish-language user manual, ensuring full understanding of safe operation. The machine also has a CE Declaration of Conformity, confirming compliance with all European safety and quality standards. Specialist assistance We maintain continuous contact with our customers. For every machine we provide technical support from our service engineers and specialists. Our specialists can: assist in determining bending steps for complex parts provide professional advice on selecting suitable materials and tools assist in selecting optimal working parameters for different materials We are here to support you at every stage of the process. Technical consulting Our specialists are available before purchase to help you select the right machine and accessories. Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.