Used Cronosstech Bk 50 for sale (34,533)

Condition: excellent (used), Weishaupt RGMS 50 dual fuel burner 5400kw. Gas +heavy oil very rare Rsdpfx Asmnqblehcjcf

Year of construction: 2022, condition: new, Bending length max. 2545 mm Bending capacity max. 4.5 mm Rcedpfx Ahjl D Rnnjcjf Angular range of the bending beam 0 - 135 degrees Upper beam stroke 25 mm Engine power hydraulic pump 7.5 kW Travel of the bending cylinder 400 mm Travel of the pressure cylinder 75 mm Travel of the back gauge 800 mm Work table height 910 mm Weight 4,200.00 kg Dimensions 3400x2010x1700mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 Rcsdpjyycwrofx Ahcof - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm Rcodpfxoyycwle Ahcjf - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: GE-50RAY, shaft length: 1,064 mm, workpiece weight (max.): 20 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 125 kg, warranty duration: 24 months, height adjustment type: electric, laser wavelength: 1,064 nm, Equipment: cabin, 50-Watt Fiber Laser with a 3-Year Warranty Your Advantages at a Glance ✅ New ✅ 3-Year Warranty ✅ German-language application software and operating manual ✅ Ready for immediate use – no programming knowledge required ✅ Service, support, and spare parts directly from Germany ✅ On-site or remote training Our Services Personal delivery and installation Setup and training on-site or via remote connection Ongoing technical support Fast service and spare parts supply from Germany Technical Data (model-dependent) Laser power: 50 watts Wavelength: 1064 nm Frequency range: 20–100 Hz Marking field: 150 x 150 mm (optional 50, 70, or 110 mm) Repeatability: ± 0.003 mm Engraving speed: up to 7000 mm/s Marking software: EZCAD German / English Pilot laser for preview Laser Class 1 Electric lifting column with motor control Max. component height: approx. 300 mm Connection: 230 V Air-cooled system Weight: approx. 170 kg Service life: over 100,000 operating hours Low maintenance and energy-efficient Included Laser head 150 x 150 mm CE declaration of conformity 3-year warranty German software Training and instruction Invoice with VAT shown Scope of delivery USB cable Rcodpfszcrbqex Ahcjf Power cable Stops USB stick with parameters German operating manual Foot pedal Laser safety glasses Application areas Ideal for: Texts and serial numbers Logos and graphics QR codes and DataMatrix codes Variable datasets Image engravings Metal engravings and commemorative inscriptions Plastics and coated materials Software EZCAD 2.14.0 (German) Supported file formats: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Shipping & Installation If shipped, we configure the machine via remote connection and provide training. Alternatively, we offer personal delivery, on-site installation, and training for your employees. Shipping costs will be agreed upon individually based on the postal code. Consultation We will gladly prepare an individual offer for you. Contact us today and learn more about the advantages of our fiber lasers. Also available as 100-watt and 200-watt versions! Secure this demonstration unit now before the new stock arrives.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Rcodpfx Asu Hrf Djhcsf Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 160 mm, operating speed: 10 mm/s, reverse speed: 90 mm/s, throat depth: 320 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 160 mm Daylight (Distance between upper and lower dies): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Machine Features Double-cylinder upper beam bending system Steel frame and upper beam construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balance shaft and eccentric bearing system for maintaining parallelism Motor-controlled angle adjustment with a mechanical stroke system within the cylinders Wide working clearance suitable for using different dies Tonnage adjustment and bottom dead center stop via NC control unit Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant multi-functional foot pedal and emergency stop system Compact hydraulic power unit with HAWE or Rexroth components Remote service support with Siemens, Pizzato, and Balluff electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines of memory per program Easy program loading and downloading via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (600 mm) Linear guide and programmable back gauge system 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear guides Lower die centering and fixing bolts Programmable precision back gauge retraction function Optional Equipment Motorized R-axis Custom bending dies Dual-hand and foot-controlled special pedal system DSP or FIESSLER safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/s Idle Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Y-Axis Motor: 0.37 kW Redpfszcmbfox Ahcocf Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: like new (used), Year of construction: 2026, power: 3 kW (4.08 HP), pressing force: 30 t, stroke length: 150 mm, operating speed: 10 mm/s, reverse speed: 70 mm/s, throat depth: 255 mm, ram plate length: 1,270 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 150 mm Distance Between Upper and Lower Dies (Daylight): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features Double-cylinder upper beam bending system Steel frame construction providing high static and dynamic rigidity Rjdszcl S Nspfx Ahcocf Upper beam movement supported by fiber slide bearings High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder Wide opening and high stroke suitable for use with different dies Easy tonnage adjustment and bottom dead center stop via NC control Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant, multi-functional foot pedal with emergency stop Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components Siemens, Pizzato, and Balluff electrical components LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program Program transfer via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (500 mm) Back gauge system with linear slides 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear slides Lower die centering bolts Programmable, precise back gauge retraction function Optional Equipment Motorized R-axis Special bending dies Special pedal system with dual-hand + foot control DSP or Fiessler safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 30 tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Free Descent Speed: 70 mm/s Throat Depth: 255 mm Distance Between Upper and Lower Dies: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-Axis Motor: 0.55 kW Y-Axis Motor: 0.18 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: used, mileage: 250 km, power: 235 kW (319.51 HP), first registration: 09/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,000 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, MAN TGM 18.320 BB Meiller TRIGENIUS 3S Tipper with Palfinger PK 12.501 Rsdpsxnu Szjfx Ahcocf Unused exhibition vehicle with day registration * All-wheel drive 4X4, selectable * Leaf/leaf suspension * Meiller 3-way tipper TRIGENIUS 4000 mm x 2420 mm * Sidewalls: 600 mm, front wall: 800 mm M Jet * 7 pairs of retractable lashing rings * Drop-side relief on right and left * Swing tailgate * Rotating beacons * Dual-circuit trailer hydraulics * 40 mm trailer hitch * MAN media system * Automatic gearbox * Engine brake * Sun visor * Air conditioning (Climatronic) * On-board computer * Turn assist system * Emergency brake assist * Reversing camera * Multifunction steering wheel * Virtual cockpit * Refrigerator * Lifting roof * Electrically heated exterior mirrors * Electric window lifters * Palfinger loader crane PK 12.501 SLD 5 * Central locking with remote control Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is provided for information purposes for the initiation of a contract. All information provided is without guarantee and thus does not constitute warranted characteristics.

Condition: used, mileage: 93,000 km, power: 180 kW (244.73 HP), first registration: 06/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro3, loading space volume: 6 m³, Year of construction: 2002, Equipment: ABS, MAN ME 18.250B 2-axle suction/pressure, Kroll body tiltable, 6000 liters, HD pump Speck, vacuum pump Gardner Denver Wittig, high pressure hose DN13 / 40m, wheelbase 3.90m, auxiliary driveM differential lock, Euro3, manual transmission, differential lock, leaf air suspension, single-family home Rcodjvxng Dopfx Ahcef

Condition: used, Year of construction: 2008, Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Rodpfx Ahek Aaz Uococf Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: Lenze Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 construction of year:2011 DN:50 Nominal flow 40 m³/h Nominal head 29 m p [bar]: 16 Rcedoh Rwafepfx Ahcof T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 175 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, throat depth: 410 mm, ram plate length: 3,700 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B175-3700 – 175 Ton x 3700 mm CNC Hydraulic Press Brake The HPB B175-3700 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 175 tons and a bending length of 3700 mm. Standard Features: Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3700 mm Distance Between Columns: 3200 mm ESA S830 CNC Control Unit 10” 2D Touchscreen Manual bending sequence and collision control Automatic compensation calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized Back Gauge X-axis: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Rcodpfxozb Inkj Ahcof R-axis: 250 mm Hardened ball screw Linear slide system Optional X-axis: 1000 mm Tooling System 2 back gauge fingers European-type Promecam quick die clamping system CRONOSSTECH special narrow lower table Eurostamp ES1260 upper die Eurostamp ES2067 lower die Amada compatible tooling system Standard Equipment B Series open frame design GIVI linear scales LED lighting VDE electrical panel Schneider or Siemens electrical components HAWE hydraulic block Eckerle pump Siemens drive Single pedal system Energy-saving Standby function 2 adjustable front support arms Optional Features CT-BEND X+R servo motorized back gauge AKAS II front safety laser system PLC safety module Rear light curtains Delem DA53Tx CNC control unit CNC controlled motorized compensation system X-axis 1000 mm extension Technical Specifications Bending Force: 175 Tons Bending Length: 3700 mm Distance Between Columns: 3200 mm Stroke: 260 mm Lower – Upper Die Gap: 465 mm Throat Depth: 410 mm Table Height: 955 mm Machine Length: 5300 mm Machine Width: 2430 mm Machine Height: 2990 mm Approach Speed: 180 mm/s Return Speed: 130 mm/s Bending Speed: 10 mm/s Oil Tank: 180 L Weight: 10,500 kg Main Motor: 15 kW X-axis Speed: 300 mm/s R-axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey. 🇹🇷

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, throat depth: 410 mm, ram plate length: 6,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B220-6100 – 220 Ton x 6100 mm CNC Hydraulic Press Brake The HPB B220-6100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for the precise, powerful, and repeatable bending of long sheet metal parts, featuring a bending force of 220 tons and a bending length of 6100 mm. It is suitable for applications in heavy industry, steel construction, energy, machine manufacturing, and metalworking. The machine offers high efficiency thanks to its ESA S630 CNC control unit, servo-motor-driven back gauge system, European-type die clamping system, robust frame structure, and professional equipment. Standard Features Stroke: 260 mm Bottom – Top Die Clearance: 465 mm Throat Depth: 410 mm Bending Length: 6100 mm Distance Between Columns: 5100 mm ESA S630 CNC Control Unit 10” 2D Touchscreen Graphical Display Manual bending sequence and collision control calculation Angle correction calculation Angle measurement and correction 2D drawing 2 USB ports Offline software CT-BEND Servo Motorized X-Axis Back Gauge X-axis travel distance: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame Hardened ball screw spindle Hardened linear guides Optional X-axis: 1000 mm Die and Back Gauge System 2 flat-type, 3-stage back gauge fingers Manual Z-axis movement European-type quick Promecam upper die clamp CRONOSSTECH special narrow lower table Standard upper die ES1260, H: 67 mm, 85°, R: 0.8 mm Standard lower die ES2067, 60 x 60 mm, V: 16-22-35-50 mm Amada-compatible tooling system Other Standard Equipment B-series open cabin design Black plexiglass protective panels Single pedal system GIVI linear scales Upper beam LED lighting VDE electrical panel Schneider or Siemens electrical equipment Hoerbiger / HAWE hydraulic block Eckerle pump Siemens drive Energy-saving standby function 2 standard sliding front support arms Optional Features AKAS II front safety laser system + PLC + rear light barriers Delem DA53Tx 15” CNC control unit Delem DA58Tx 18.5” CNC control unit CNC-controlled motorized crowning system X-axis extension option up to 1000 mm Additional front support arm Additional back gauge fingers Custom bending dies Technical Specifications Bending Force: 220 Tons Bending Length: 6100 mm Distance Between Columns: 5100 mm Stroke: 260 mm Bottom-Top Die Clearance: 465 mm Throat Depth: 410 mm Rcodpfx Aszbyvtshcef Table Height: 1060 mm Machine Length: 7560 mm Machine Width: 2570 mm Machine Height: 3440 mm Approach Speed: 150 mm/s Return Speed: 110 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 20,000 kg Main Motor Power: 22 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. The country of origin is Turkey.

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5,7", working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, back gauge adjustment: CNC-controlled, power: 37 kW (50.31 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear The HGM B20-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, the energy sector, and high-capacity metalworking applications. It features a 20 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch-screen CNC control unit, motorized back gauge system, Rexroth hydraulic system, and dual-speed cutting technology, it offers high performance and precise cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Distance Between Columns: 3410 mm Cutting Capacity: 20 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operating mode Single-part processing Program memory Rsdpfx Ahezbyupjcjcf Up to 2A digital outputs Automatic calculation of cutting angle and pressure based on material Automatic cutting program Rear sheet support system RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts exceeding 1000 mm CRONOSSTECH X-axis Motorized NC-Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body construction Hardened ball screw Optionally available with 1250 mm or 1500 mm Front Support Arms 1000 mm length Scale measuring system T-slot Retractable stopper Retractable Front Finger Guard System 1000 mm retractable front guard cover Optional full-size retractable guard system Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 – SILCL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Cabin Guards Professional appearance Wide field of vision Ergonomic design Rexroth Hydraulic System Dual-Speed Cutting System Two different cutting speeds Faster operation on short parts High-speed cutting up to 60% of maximum capacity Energy-saving standby mode Optional Features 1250 mm or 1500 mm X-axis back gauge Full-size retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 20 mm Cutting Capacity (700 N/mm²): 13 mm Cutting Length: 3100 mm Cutting Angle: 2.75° Number of Pressure Cylinders: 17 Cutting Speed / Fast Mode: 6 / 9 hpm Distance Between Columns: 3410 mm Table Height: 925 mm Table Width: 605 mm Throat Depth: 250 mm Back Gauge Travel (X-axis): 1000 mm Machine Length: 4790 mm Machine Width: 3850 mm Machine Height: 2540 mm Oil Tank Capacity: 495 L Motor Power: 37 kW Machine Weight: 19 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,600 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2600 – 100 Ton x 2600 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Bottom – Top Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 2600 mm Distance Between Columns: 2150 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pcs Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the molds to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Cabin Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel according to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 pcs standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System MVD cammed and G.E.C. motorized system Automatic calculation by CNC Faster adjustment time Higher bending accuracy Longer machine life AKAS (FPSC) Front Safety Laser System + Rear Light Curtain Laser-based finger protection system Increases operator safety Fast detection and response time CE compliance Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Ton Bending Length: 2600 mm Distance Between Columns: 2150 mm Stroke: 260 mm Bottom-Top Die Gap (Daylight): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 4220 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Pressing Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank Capacity: 170 L Machine Weight: 6430 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s Rsdpfx Aezbyt Sehcjcf This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Year of construction: 2006, condition: good (used), machine/vehicle number: WIZ, Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails External dimensions of steel construction (space required) 13.2 x 5.5m Height of steel construction 4.85 m, UK steel construction 4.65 m UK runway crane 4.4m, UK bridge 4m, hook height 3.8m Support spacing 4 + 4 + 4.9m The system is delivered complete: KBK rails, rail connectors Undercarriages, end plates, drag cables, holders/hangers, etc + complete steel construction (HEA180) incl. Demag DC 500KG chain hoist Crane is dismantled and available immediately Rsdpfjiwdaqjx Ahcecf Item location is 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist - can be easily cleaned) Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 100 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 40 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Distance between upper and lower die (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D touchscreen graphic display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European-Type Quick Tooling Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Short Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Rcsdpfszbrf Tjx Ahcjf Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touchscreen graphic display 2D drawing and 3D visualization / product simulation User-friendly interface 1 GB hard drive Automatic bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance between columns: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise sheet metal bending applications, offering a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Daylight (Distance between lower and upper die): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms Redpfozbrfaex Ahcscf 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) 15” color touchscreen 2D product drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and fault management Technical Specifications Bending Force: 60 Ton Bending Length: 2100 mm Distance between Columns: 1600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 270 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 410 mm, ram plate length: 3,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, machine manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features Stroke: 260 mm Daylight (Distance between Upper and Lower Die): 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Automatic angle correction (camber compensation calculation) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel distance: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-step (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam Type) Quick tool change Secure locking system Practical operation European Type Narrow Lower Table 70 mm or 90 mm special lower table T-slots can be applied according to tooling requirements Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment High-quality hydraulic block system Eckerle hydraulic pump Siemens main drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Optional Features Servo Motorized X + R Axis Back Gauge System Servo-controlled X-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm Rcsdpjzbrc Sefx Ahcof R-axis travel distance: 250 mm Hardened linear guides and ball screw system X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System Motorized cam system Automatic calculation by CNC Faster adjustment time Higher bending accuracy Longer machine life Front Safety Laser System + Rear Light Curtains Laser-based finger protection system Increases operator safety Fast detection and response time Maximum working distance: 4.3 meters Technical Specifications Bending Force: 270 Tons Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 960 mm Machine Length: 4840 mm Machine Width: 2500 mm Machine Height: 3040 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 290 L Machine Weight: 12,300 kg Main Motor Power: 22 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 100 tons and a bending length of 3100 mm. It provides high performance for metalworking and industrial production facilities, thanks to its ESA S830 CNC control unit, servo motor-driven back gauge system, high-rigidity frame structure, and professional tooling equipment. Standard Features Stroke: 260 mm Bottom – Top Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Rodpfxszbrb Is Ahcecf Offline programming software CRONOSS Servo Motorized X-R Axis Back Gauge System X-axis travel distance: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel distance: 250 mm Robust steel frame construction Hardened ball screw Linear guide system Optionally, the X-axis can be extended up to 1000 mm Back Gauge Fingers 2 pcs Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Quick Clamping Promecam Upper Die Holder E7 Quick tool change Safe operation Practical and ergonomic design CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table, depending on machine tonnage T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Maximum capacity: 80 Ton/Meter B Series Open Housing CRONOSS Premium open housing Black plexiglass protection panels Wide field of view Ergonomic design Single Pedal System (P2) GIVI Linear Scales LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Siemens Drive Energy-saving standby function 2 Standard Sliding Front Support Arms Height adjustable Scale measuring system Operator support system Optional Features CT-BEND Servo Motorized X+R Axis Back Gauge System Fully automatic movement in X and R axes Manual movement in Z1 and Z2 axes X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System CRONOSS cam system G.E.C. motorized structure Automatic calculation by CNC More precise and uniform bending Does not require operator intervention AKAS FPSC Front Safety Laser System + Rear Light Curtain CE-compliant safety system Finger protection function Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Tons Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 905 mm Machine Length: 4670 mm Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 180 L Machine Weight: 6780 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, controller manufacturer: ELGO, controller model: PT40T, working width: 2,560 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 31 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, power: 7.5 kW (10.20 HP), Equipment: CE marking, documentation/manual, emergency stop, type plate available, RGM 04-2560 – 4 mm x 2560 mm Mechanical Guillotine Shear The RGM 04-2560 Mechanical Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for workshops, metalworking facilities, steel service centers, and general sheet metal processing applications. It features a 4 mm sheet metal cutting capacity and a 2560 mm cutting length. Thanks to its monobloc welded body structure, motor-driven NC-controlled back gauge system, and high-precision cutting performance, it offers a reliable and cost-effective solution. Standard Features Rcodpfxezbq R Uo Ahcsf ELGO P40T Touchscreen NC Control Unit Rigid monobloc welded body providing maximum cutting accuracy 750 mm NC-controlled motor-driven back gauge system High-carbon/high-chromium blades Upper blade with 2 cutting edges Lower blade with 4 cutting edges Mechanical sheet holding system Manual blade clearance adjustment system Roller-type front worktable Front support arms with scale Illuminated cutting line Front finger guard system Foot pedal Rear safety guards Emergency stop button Optional Features 1000 mm back gauge distance Pneumatic sheet support system (rear drop) Pneumatic sheet support system (front and rear drop) 0° – 180° angle gauge Extended front support arms and miter arm 750 mm manual back gauge adjustable from the front with a handwheel CE-compliant light curtain system Technical Specifications Cutting Capacity (450 N/mm²): 4 mm Cutting Length: 2560 mm Cutting Angle: 1.3° Cutting Speed: 31 strokes per minute (hpm) Table Height: 880 mm Machine Dimensions (L x W x H): 3100 x 2250 x 1400 mm Motor Power: 7.5 kW Machine Weight: 3500 kg This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5,7 ", working width: 4,000 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear The HGM B16-4000 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, machine manufacturing, and high-capacity sheet metal processing applications, offering a 16 mm sheet metal cutting capacity and a 4000 mm cutting length. It provides precise and efficient cutting thanks to the ELGO P40T touch-screen CNC control unit, automatic blade gap adjustment system, motorized back gauge system, and Rexroth hydraulic system. Standard Features Throat Depth: 250 mm Cutting Length: 4000 mm Distance Between Columns: 4580 mm Cutting Capacity: 16 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Rcedpozbqzyofx Ahcof Automatic calculation of blade gap, cutting angle, and pressure adjustment based on material Automatic cutting program Back sheet support system with RTS function Automatic Blade Gap Adjustment System Automatic calculation and adjustment based on the thickness of the sheet to be cut Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm Motorized NC Controlled Back Gauge on X-axis X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Protection System 1000 mm retractable front protection guard Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) Premium Front and Rear Guarding Rexroth Hydraulic System Energy-Saving Standby Mode Optional Features Pneumatic Sheet Support System (Type 2 – 4-Position RTS Function) 4-position pneumatic support system Stable support for large-sized sheets Reduces sheet bending and deformation RTS (Return To Sender) function Increases operator comfort and safety Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Length Retractable Front Protection System Technical Specifications Cutting Capacity (450 N/mm²): 16 mm Cutting Capacity (700 N/mm²): 10 mm Cutting Length: 4000 mm Cutting Angle: 0.5° – 3.0° Number of Pressure Cylinders: 18 Cutting Speed / Fast Mode: 6 / 12 hpm Distance Between Columns: 4580 mm Table Height: 1010 mm Table Width: 700 mm Throat Depth: 250 mm Back Gauge Movement (X-axis): 1000 mm Machine Length: 5980 mm Machine Width: 3750 mm Machine Height: 2825 mm Oil Tank Capacity: 390 L Motor Power: 30 kW Machine Weight: 21.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5.7”, working width: 3,100 mm, stroke rate (min.): 14 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, power: 22 kW (29.91 HP), Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B13-3100 – 13 mm x 3100 mm Hydraulic Guillotine Shear The HGM B13-3100 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for metal processing, steel construction, machine manufacturing, and general sheet metal processing applications. It features a 13 mm sheet metal cutting capacity and a 3100 mm cutting length. Thanks to the ELGO P40T touch screen NC control unit, motorized back gauge system, Rexroth hydraulic system, and double-speed cutting technology, it offers precise and efficient cutting. Standard Features Throat Depth: 250 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Distance Between Columns: 3340 mm Cutting Capacity: 13 mm ELGO P40T 5.7” Touch Screen NC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic blade gap, cutting angle, and pressure adjustment calculation based on material Automatic cutting program Back sheet support system RTS (Return To Sender) function Manual Blade Gap Adjustment System Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge X-axis travel distance: 1000 mm Speed: 150 mm/sec Accuracy: ±0.05 mm Rjdpozbqyiefx Ahcjcf Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Guard System (1000 mm) Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) CRONOSSTECH Premium Front and Rear Guard Rexroth Hydraulic System Double-Speed Cutting System Energy-Saving Standby Mode Optional Features Automatic Blade Gap Adjustment System (ELGO P40T) Pneumatic Sheet Support System (Type 1 - Double Position) 1250 mm or 1500 mm X-axis back gauge 1500 / 2000 / 3000 mm front support arms Full-length retractable front guard system Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 3100 mm Cutting Angle: 2.1° Number of Pressure Cylinders: 14 Cutting Speed / Fast Mode: 9 / 14 hpm Distance Between Columns: 3340 mm Table Height: 880 mm Table Width: 620 mm Throat Depth: 250 mm Back Gauge Travel (X-Axis): 1000 mm Machine Length: 4860 mm Machine Width: 3585 mm Machine Height: 2300 mm Oil Tank Capacity: 265 L Motor Power: 22 kW Machine Weight: 11.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELGO, controller model: P40T 5.7”, working width: 4,000 mm, cutting angle (min.): 2.1 °, stroke rate (min.): 15 1/min, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Key Advantages ✔ 13 mm sheet metal cutting capacity (450 N/mm²) ✔ 4000 mm cutting length ✔ ELGO P40T 5.7” touchscreen NC control unit ✔ NC-controlled motorized back gauge system ✔ Program memory ✔ Automatic cutting program ✔ Two-speed cutting system ✔ Energy-saving standby mode ✔ Rexroth hydraulic system ✔ Premium front and rear guard system ✔ Transfer table and ball bearing conveying system ✔ Shadow light cutting line Rcjdozbqw Ispfx Ahcjf ✔ Heavy-duty steel frame body Standard Features ELGO P40T 5.7” Touchscreen NC Control Unit 5.7” TFT touchscreen Manual operation mode Single-piece processing mode Program memory Up to 2 digital outputs Automatic angle, pressure, and blade clearance calculation based on material thickness Automatic cutting program Rear sheet support system control RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Back Gauge Retraction System Automatic lifting function for parts larger than 1000 mm CRONOSSTECH X-Axis Motorized NC Controlled Back Gauge System NC-controlled automatic X-axis movement 1000 mm travel distance 150 mm/sec speed ±0.05 mm positioning accuracy Steel frame body Hardened ball screw spindle Front Support Arms 1000 mm length Scale measurement system T-slot structure Retractable stop elements Retractable Front Finger Guard System 1000 mm retractable front guard cover Upper Blade 2 cutting edges 450 N/mm² material capacity Lower Blade 4 cutting edges 450 N/mm² material capacity Foot Pedal Custom-designed pedal with emergency stop function Simultaneously activates the pressure cylinders and cutting motion Rear Safety System (except CE) Model: EOS2E 2BX 2 laser beams Type 2 – SIL1 safety level 510 mm scanning height 3 ms response time IP65 / IP67 protection class Operating temperature: -30°C / +55°C 24V DC power supply Emergency Stop Buttons Shadow Light Cutting Line Ball Transfer Table Electrical Equipment Schneider or Siemens 400V / 50Hz CRONOSSTECH Premium Guard System Front and rear guard cabinets Wide viewing angle Ergonomic operation Professional industrial design Hydraulic System Rexroth hydraulic block Two-Speed Cutting System Two different cutting speeds High efficiency for short parts High-speed operation up to 60% of maximum cutting capacity Energy-Saving Standby Mode Optional Features Automatic Blade Clearance Adjustment System ELGO P40T touchscreen control integration Automatic blade clearance adjustment based on sheet thickness Pneumatic Sheet Support System Type 1 Dual-position system Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Size Retractable Front Guard System Technical Specifications Cutting Capacity (450 N/mm²): 13 mm Cutting Capacity (700 N/mm²): 8 mm Cutting Length: 4000 mm Cutting Angle: 1.8° Number of Pressure Cylinders: 18 Cutting Speed / High-Speed Mode: 9 / 15 hpm Distance Between Columns: 4310 mm Table Height: 930 mm Table Width: 660 mm Throat Depth: 250 mm Back Gauge Travel Distance (X): 1000 mm Machine Length: 5665 mm Machine Width: 3785 mm Machine Height: 2380 mm Hydraulic Oil Tank: 350 Liters Motor Power: 22 kW Machine Weight: 18.5 tons