Used Cream Cooker 60 Liter Capacity for sale (50,930)

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Dodpfx Alezuaprsbswb Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Djdpfxjycpxgs Albswb Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 25.90 m · Maximale seitliche Reichweite 21.70 m · Gesamtlänge mit Gabeln 9.28 m · Länge bis zur Vorderseite der Gabeln 8.08 m · Gesamtbreite 2.50 m · Gesamthöhe 3.10 m · Gesamtbreite der Kabine 0.96 m · Bodenfreiheit Maschine 0.38 m · Radstand 3.05 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Drehung des Oberwagens 360 ° · Gewicht 18000 kg · Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 100 mm x 60 mm · Reifenmodelle 445/65 R22,5 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FHT-6SMU1 Dwjdpfxozzrtcj Albob · Nennleistung Verbrennungsmotor / Leistung 156 Hp / 115 kW · Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Kühlsystem des Motors Wasserkühlung · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatisch · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 8600 daN · Parkbremse Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Fassungsvermögen des Kraftstofftanks 270 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 68 dB · Umgebungsgeräusch (LwA) 108 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: good (used), Year of construction: 2017, machine/vehicle number: 271464-01-01, Offer 26075 Technical Specifications: - Rope balancer with a load capacity of approx. 60 kg - Articulated arm with an outreach of approx. 3.6 m - Swivel range approx. 375° - Hook travel approx. 2.0 m Dwsdpfxoyv En Es Albob - Total construction height approx. 3.2 m - Pneumatic connection 6 bar - Own weight approx. 300 kg

Condition: used, tank capacity: 100,000 l, total height: 13,000 mm, outer diameter: 3,500 mm, 100,000-liter stainless steel tank with insulation Diameter: 3.5 m Height: 13 m Dwjdpfx Aozvxc Tolbeb

Condition: excellent (used), Year of construction: 2006, ARBURG 370 S — 600-290 | Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm Dwodszrwz Topfx Albob ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Dwodpezrvy Ujfx Albob Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: used, Year of construction: 2015, functionality: fully functional, total width: 90 mm, total length: 136 mm, overall weight: 200 kg, input voltage: 400 V, Equipment: crane, For sale is a Speidel Braumeister 200-liter brewing system in very good condition. The brewing system was previously used but is in excellent technical and visual condition and has always been carefully maintained. Details: • Speidel Braumeister 200 liters • Used, but in very good condition Dodpfezwn U Uex Albowb • Ideal for ambitious home brewers and smaller commercial breweries • Location: Italy If you are interested or would like more information, please send a message. Accessories are also available for sale.

Condition: used, Conical mixer, Nautamix, Nauta N.V. Mixing capacity: 1000 liters Dwsdpsy Tlgpofx Albjb Stainless steel mixing vessel and mixing screw Drive shaft made of steel Motor power: 4 kW and 0.55 kW Upper cone diameter: +/- 1700 mm Equipped with a pneumatic discharge slide valve See our other listings.

Condition: good (used), Year of construction: 1989, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank -Pressure vessel: Compressed air tank on a mobile chassis -Container capacity: 250 liters Dwjdpfxjqva Nns Albob -Operating pressure: max. 30 bar -Position: lying on transport frame -Dimensions: 2000/550/H1010 mm -Weight: 363 kg

Year of construction: 1999, condition: good (used), SS 316 tank 400 liter Material: Stainless Steel 316 Dodjmidguepfx Albowb Capacity: 400 liter Year: 1999 Water Pressure: +1.0/-0.15 bar Temperature: -10/+50 C Dimensions (LxWxH): 800x800x1.400 mm Weight: 86 kg.

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid swelling during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing is possible using a water mixing and dosing device + water-carrying parts are made of stainless steel and require no cleaning + hygienically flawless, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel cooling evaporators + multi-stage stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing devices with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling capacity*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh Dsdpfxsivdvkj Albswb * with +17.5°C inlet and +2.5°C outlet

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: - 3" filling pipe with TW coupling - 1" sounding pipe with sounding rod - Euroflex 3 suction combination (max. 150 l/h) - 1 2" vent with vent cap. Dedpfohvmitjx Albjwb The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be repainted in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers are possible, please contact us for this. Delivery time by arrangement! We also have these types of tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit switch, and complete tank fitting consisting of: - Filling pipe 3" with TW closure - Gauge pipe 1" with gauge rod - Euroflex 3 suction combination (max. 150 l/h) - 1 ventilation nozzle 2" with ventilation cap. Djdpfxehvmiwj Albswb The tank is factory-equipped with the aforementioned fittings and is internally cleaned. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be provided with a new paint finish in your desired RAL color and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location, and you will promptly receive the exact freight costs. If you require further information, simply call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters Dodpei Enxdsfx Albewb - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: excellent (used), power: 190 kW (258.33 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 10,650 h, Year of manufacture: 2017 Drive: Wheeled Number of cylinders: 4 Unladen weight: 65,000 kg Superstructure brand: LIEBHERR LH 60 M LITRONIC CE marking: yes Technical condition: very good Optical condition: very good LIEBHERR LH 60 M LITRONIC MATERIAL HANDLER – YEAR OF MANUFACTURE 2017 – 20 M REACH For sale is a powerful and excellently equipped Liebherr LH 60 M Litronic material handler from 2017, ready for immediate use in scrap, recycling, port, and bulk material handling. This reliable machine offers an impressive reach of 20 meters and is powered by a powerful Liebherr D944 A7-04 engine with 190 kW (258 hp). The robust undercarriage with 4-point support provides maximum stability, while the hydraulically elevating cab ensures excellent all-round visibility and high operating comfort. Equipped with an industrial straight boom Z1 of 9.10 m and an industrial, heavily angled stick of 6.80 m, this machine is ideal for demanding handling operations. Includes a 5-tine grapple and a multi-shell grapple with a capacity of 1.10 to 1.70 m³. Technical data Manufacturer / Model: Liebherr LH 60 M Litronic Year of manufacture: 2017 Operating weight: 65,000 kg Reach: 20.0 m CE certified Engine: Liebherr D944 A7-04 Power: 190 kW / 258 hp Wheelbase: 3.40 m Ground clearance: 47.5 cm Undercarriage width: 3.53 m 4-point support Hydraulically elevating cab and 4th hydraulic function Industrial straight boom Z1 – 9.10 m Industrial, heavily angled stick – 6.80 m 5-tine grapple Multi-shell grapple 1.10 – 1.70 m³ Highlights ✔ 20-meter working reach ✔ Powerful and reliable Liebherr engine ✔ Hydraulically elevating cab for optimal visibility ✔ Including grapple equipment ✔ CE-certified machine ✔ Stable 4-point support ✔ Ready for immediate use ✔ Ideal for scrap, recycling, port, and bulk material handling Ready for Immediate Use The machine is in good working condition and ready for immediate use. For further information, photos, or to arrange a viewing, please do not hesitate to contact us. We speak German We speak English Dsdpjzdb Dqefx Albowb Hablamos Español

Year of construction: 2002, condition: refurbished (used), Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 5,000-liter double-walled storage tank for the storage of heating oil. Nominal capacity: 5 cubic meters, new Color: Painted RAL 7035 Material: Steel in steel, material S235JRG2 Documentation: Manufacturer's certificate / Type plate 1 dipstick 1 vent pipe 1 filling pipe 1 new limit switch 1 new leak detection device 1 ladder 1 suction line Tank dimensions: approx. 2,750 mm Diameter: approx. 1,600 mm Weight: approx. 1,200 kg Storage: Above ground Dodpfxjh U Azvj Albewb Delivery time: 14 days Sincerely, from Warstein Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit switch, and complete tank fittings consisting of: - Filling pipe 3" with TW coupling - Level gauge pipe 1" with level gauge rod - Suction combination with suction line (1 1/2" or 2") - 1 vent stub 2" with vent cap The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg The tank can be painted in your desired RAL color, and optionally equipped with a ladder including an operating platform. Dwodoguzhcjpfx Albsb Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. If you require any further information, please call us or send us an email. We also offer trade-in and purchase of tanks/containers; please contact us for more information. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Year of construction: 2026, condition: new, functionality: fully functional, For sale: painted or galvanized skip container, 1000 liters. Product description: We are selling a painted or galvanized skip container with a capacity of 1000 liters, ideal for transporting and storing waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: • Bottom: 2 mm • Sides: 2 mm • Container frame: 80 x 50 x 4 mm Dsdezm Erpjpfx Albswb • Internal dimensions: 1950 x 740 x 1090 mm • Stackable (4-high) • Information and warning stickers: white and red • The entire range of RAL colors is available • Interior and exterior: zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: • Robust construction for heavy materials • Easy handling thanks to stable hinges • Stackable • Weather-resistant due to corrosion-resistant coating

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watts: 2800 W K Watts: 2150 W B Watts: 500 W Dwjdpjzba N Tsfx Albeb W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Dsdozg Twgopfx Albswb Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Dwsdpozxkiqofx Albsb Tyres Information Front left - 10 mm Front right - 10 mm Middle left - 7 mm Middle right - 6 mm Rear left - 7 mm Rear right - 7 mm

Condition: good (used), mileage: 625,836 km, power: 118 kW (160.44 HP), first registration: 01/2011, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 7,030 mm, total width: 2,600 mm, total height: 3,440 mm, loading space length: 3,580 mm, loading space width: 2,260 mm, loading space height: 2,340 mm, Year of construction: 2011, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, seat heater, = Further Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Halogen lamp - Short cab - Manual - Radio/cassette - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 2095 kg, Unladen weight: 5395 kg, Gross weight: 7490 kg, Total tank capacity: 150 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 118 kW (158 hp), Fuel: Diesel, Euro standard: 5, Transmission type: Automatic, Gearbox: ZF, Gears: 6, Power steering, ABS, Starter battery, System length: 88 cm, System type: ,,,,, Central locking, Number of seats: 2, Seat configuration: 1+1, Upholstery: Fabric, Seat adjustment: Manual, Cooling unit manufacturer: Konvekta, Cooling unit model: .?, Cooling unit: Refrigeration compressor, Body insulation, Wall thickness: 90 mm, Type of cooling: Refrigeration and freezing, Day/night cooling: Day cooling, Additional evaporator, Spare wheel, Spare wheel tread: 11% = Further Information = Transmission Gearbox: ZF, 6 gears, automatic Axle Configuration Tyre size: 205/75R17.5 Brakes: disc brakes Axle 1: Steered; Tire tread left: 4 mm; Tire tread right: 4 mm; Suspension: leaf spring Axle 2: Twin tires; Tire tread inner left: 5 mm; Tire tread outer left: 6 mm; Tire tread inner right: 5 mm; Tire tread outer right: 5 mm; Suspension: air suspension Weights Unladen weight: 5,395 kg Payload: 2,095 kg Gross vehicle weight: 7,490 kg Functional Loading platform height: 101 cm Cooling unit: engine-driven Wall thickness: 90 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: BX-XT-09 = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands, years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognized quality • Good pricing • Correct trading practices • We speak many languages Dwedpfxjyzx Dde Albsb • We understand our customers • Support with import and transport • (Export) registration quickly organized • Expert technical services • The security of "recognized quality" • And more… Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request through our website. Ask directly about our European warranty package.

Condition: used, Name: Filter Press Dwodpfxermmp Is Albob Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Condition: Second hand Price: On demand

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,855 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 09/2027, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: Dwjdpfx Alozivfxobsb * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,855 STILL 5.0-ton electric forklift, very good battery, good tires (new rear tires), telescopic mast for clear visibility, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer’s specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). You can find more information and offers on our newly designed website!