Used Cormak Hrt 1M 6 Rolek for sale (49,407)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Laedpoguk Dvsfx Ancja When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), mileage: 161,265 km, power: 105 kW (142.76 HP), first registration: 10/2019, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,260 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,400 mm, total width: 2,020 mm, total height: 2,500 mm, loading space length: 2,560 mm, loading space width: 1,750 mm, loading space height: 1,720 mm, Year of construction: 2019, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Further options and accessories = - Heated mirrors - Halogen lamp - Includes roller and step - Manual - Rear-view camera - Skai upholstery - Partition wall = Remarks = Configuration: 4x2, Payload: 1,020 kg, Curb weight: 1,980 kg, Gross weight: 3,000 kg, Unbraked trailer load: 750 kg, Braked trailer load on central axle: 2,000 kg, Tow bar, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, CarPlay, GPS navigation, Color: Multicolor, Maintenance manual, Heated mirrors, Rear-view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 105 kW (141 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side walls lined, Rear step, Roof rack: includes roller and step, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Seats: 3, Seat configuration: 1+2, Seat cover: Skai, Seat adjustment: Manual, L1H1 Mbux Airco Euro6 Roof rack-Step Towbar Camera Two-Tone 1st Owner 3-Seater/ Faux leather, Spare wheel, Spare wheel tread: 1%, Tire type: Summer tires = Further information = General information Number of doors: 1 Registration: VDD-92-T Axle configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 6 mm; Tire tread right: 6 mm; Suspension: Coil springs Axle 2: Tire tread left: 7 mm; Tire tread right: 7 mm; Suspension: Leaf springs Weights Kerb weight: 1,980 kg Payload: 1,020 kg gross vehicle weight: 3,000 kg Functional Loading platform height: 60 cm Maintenance APK (general inspection): valid until 11/2026 Condition Ljdpfoyyuylox Ancsaa Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Leasing rate: €259 per month (panel van, 72 months); Please ask for further information and conditions.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, number of shelf rows: 6, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: Lajdpfx Ajyz Ibfsncea - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: new, Year of construction: 2026, functionality: fully functional, All our extractors feature easy operation and a possibility of quick bag replacement. Wheeled base ensures portability. Metal rotor ensures silent and failure-free extractor operation. Affordable price in comparison to machine's efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 6 burlap bags Technical data Suction efficiency 4860 m3/h Bags capacity 3×200 L Number of bags 6 Extracting connector diameter 1×180, 4×100 mm Ljdpevu Rx Iofx Ancjaa Dimensions (L×W×H) 2355×590×2150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase 400V User manual yes EC Declaration yes

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm without collets Lasdjvyg A Topfx Ancoa

Condition: used, mileage: 56,000 km, power: 88 kW (119.65 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,050 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sales price: €8,290 Renault Trafic MAXI / LONG from first owner with 2 sliding doors First registration: 10/2020 Mileage: 56,000 km Technical inspection (TÜV/HU): 88 kW / 120 hp Emissions standard: EURO 6 VAT deductible Special features: - 2 sliding doors - Long wheelbase - LED headlights - Reversing camera - Fog lights - LED interior lighting - Registered for 3 seats / further retrofitting possible Additional equipment/special features, see below: ---- Please no emails / no emails Requests by email cannot be processed due to time constraints, thank you for your understanding! ---- Opening hours and additional information: Inspection and purchase possible without prior appointment: MON - THU: 9:00 am to 4:00 pm FRI: 9:00 am to 1:00 pm SAT: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen For inquiries: Christian Hirsch Please try calling several times as we are often in customer meetings. Further offers available at ---- Special equipment: Passenger airbag, Rear parking assist with reversing camera, Rear door with window, Clear View package, Cargo partition wall with window, Full wheel covers, Left sliding door (load/passenger compartment), Front side airbags Further equipment: Airbags, Traction control (ASR), Electrically adjustable and heated exterior mirrors, 85 Ah battery, On-board computer, Tachometer, Laodpfxoyzv Tpo Ancea Automatic headlight activation, Keyless-GO, Cooled glove compartment, Interior pollen filter, Body/Type: Long panel van, Fuel tank: 80 litres, Adjustable steering column (steering wheel), Model update, Engine: 2.0 l - 88 kW dCi Diesel Energy EURO 6, Rear fog lamp, Radio pre-installation, Wheelbase 3,498 mm, Tire repair kit, Low emission per Euro 6d-TEMP standard, Full-LED headlights with C LED signature, Right sliding door (load/passenger compartment), Seat covers/upholstery: fabric, Seats in cab: twin passenger seat, Seats in cab: driver's seat, 3-way adjustable comfort seat, Start/stop system, LED daytime running lights, Side lashing eyes in cargo area, Electrical pre-installation for bodywork, Heat-insulating glazing ---- Please no emails / no emails Requests by email cannot be processed due to time constraints, thank you for your understanding! ---- Opening hours and additional information: Inspection and purchase possible without prior appointment: MON - THU: 9:00 am to 4:00 pm FRI: 9:00 am to 1:00 pm SAT: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen For inquiries: Christian Hirsch Please try calling several times as we are often in customer meetings. Further offers available at The equipment was determined using a VIN query. Technical errors may occur. All information provided online is non-binding descriptions and does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors / changes / input errors. Subject to errors and prior sale.

Condition: used, mileage: 268,697 km, power: 440 kW (598.23 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 17,850 kg, maximum load weight: 8,150 kg, tire size: 315 / 80 R 22.5 / 11mm, wheelbase: 3,900 mm, next inspection (TÜV): 11/2024, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 9,600 mm, total width: 25,500 mm, total height: 34,000 mm, front tire size: 315 / 80 R 22.5 / 11mm, operation weight: 26,000 kg, Equipment: air conditioning, crane,

Condition: used, Year of construction: 2020, saw blade diameter: 600 mm, cutting height (max.): 200 mm, total length: 8,000 mm, total width: 2,000 mm, Push-feed crosscut saw, equipped with a 4-meter pusher, cutting height: 30 to 200 mm, cutting width: 300 to 580 mm, pusher capacity: 350 kg. Lodpfx Ansyzrb Aecoaa

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Lasdpfxoizr Rls Ancea Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Ljdex Dkr Nspfx Ancsaa Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Lsdpfewnb T Iox Ancsaa Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter Lajdpfxjud Izte Ancsa 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: used, mileage: 29,000 km, power: 88 kW (119.65 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,050 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sale price: €13,000 Renault Trafic MAXI / LONG, one owner, with 2 sliding doors First registration: 09/2020 Mileage: 29,000 km 88 kW / 120 HP Emissions standard: EURO 6 VAT deductible Key features: - 2 sliding doors - Long wheelbase - LED headlights - Reversing camera - Fog lights - LED interior lighting - Registered for 3 seats (additional retrofitting possible) For further equipment and options, see below: ---- Please, no emails due to time constraints, emails cannot be processed. Thank you for your understanding! ---- Opening hours and further information: Viewings and purchases possible without appointment: MON – THU: 9:00 to 16:00 FRI: 9:00 – 13:00 SAT: 9:00 – 12:00 Address: Tabakried 11 84076 Pfeffenhausen, Germany For inquiries: Christian Hirsch Please try to call multiple times, as we are often in customer meetings. Further offers available at Special equipment: - Passenger airbag - Rear parking assist with reversing camera - Tailgate with window - Clear-View Package - Cargo compartment bulkhead with window - Full wheel trims - Sliding door left (cargo/passenger compartment) - Front side airbag Further equipment: - Airbags - Traction control (ASR) - Electrically adjustable and heated exterior mirrors - 85 Ah battery - On-board computer - Tachometer - Automatic headlight activation - Keyless-GO - Glove compartment with cooling function - Interior filter: pollen filter - Body type: long panel van - Fuel tank: 80 liters - Adjustable steering column - Model year update - Engine: 2.0 L – 88 kW dCi Diesel Energy EURO 6 - Rear fog light - Radio preparation - Wheelbase: 3,498 mm - Tire repair kit - Low emission according to Euro 6d-TEMP - Full LED headlights with C-shape LED signature - Sliding door right (cargo/passenger compartment) - Upholstery: fabric - Cabin seats: double passenger seat - Cabin seats: comfort driver's seat, 3-way adjustable - Engine start/stop system - LED daytime running lights - Lashing eyes on the sides in cargo area - Pre-installation for body electrics - Heat insulating glazing ---- Please, no emails Ledpfswvhltsx Ancsaa due to time constraints, emails cannot be processed. Thank you for your understanding! ---- Opening hours and further information: Viewings and purchases possible without appointment: MON – THU: 9:00 to 16:00 FRI: 9:00 – 13:00 SAT: 9:00 – 12:00 Address: Tabakried 11 84076 Pfeffenhausen, Germany For inquiries: Christian Hirsch Please try to call multiple times, as we are often in customer meetings. Other offers available at The listed equipment details have been determined via a VIN check; technical errors may occur. All information provided online is non-binding and does not represent warranted characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Subject to errors and prior sale.

Condition: new, Clutches and brakes for Russian machine tools Laodpfev Sb Eyex Ancsa We offer for sale original electromagnetic and mechanical clutches, brakes and complete clutch assemblies for Russian machine tools such as: 1M63, 1M65, 1H65, 165, 1512, 1516, 1525, 1L532, RT-117, DIP-300 and many others. Our warehouse also offers spare parts such as: - electromagnetic clutches and brakes, clutch plates and brush holders; - complete electromagnetic and mechanical clutches for 1M63, 16K20, clutch shafts, friction plates and discs; - parts, clutches and brakes for 6P82T, 6P83 milling machines, etc. - pneumatic clutches for KD2128, KD2328 series presses, etc., made in Russia. Most of the above-mentioned items are available from stock, for the remaining ones we offer the fastest possible delivery times.

Condition: used, mileage: 800,000 km, power: 324 kW (440.52 HP), first registration: 01/2016, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 6,500 mm, Equipment: ABS, air conditioning, parking heater, MAN TGX 18.440 First registration: km Automatic transmission Retarder ACC (Adaptive Cruise Control) Wheelbase: 4800 mm Flatbed: 6.1 m German vehicle from first owner Tel: We are happy to assist you with financing or leasing EU sale: net price upon submission of company documents and VAT number VAT deposit: €2,000 We speak English We speak Serbian-Croatian Lsdpfx Anexpz Ryecjaa Our services for you: - Customs plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation options - Transfer from Munich Airport or Passau Railway Station Tel:

Condition: excellent (used), Year of construction: 2011, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Ljdew Idvwspfx Ancoaa Model: KR16-2 (KR16-2 Foundry option is also available) Condition: Used & Tested Year: 2011 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION Laodpfx Anoywu Uqecoa New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Lsdpfx Ajyy Nl Noncoaa Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg

Condition: new, Year of construction: 2026, A professional sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Machine description Lsdpfx Ajtz Sm Aencjaa Strong, solid and compact design ensures convenient and and failure-free operation Sliding table saw mounted on a spindle tilting in relation to the worktable capability Steel, welded body with a permanent cast iron table and a movable table made of strengthened aluminium – the table of this machine is very durable and does not deform Technical parameters Cutting length 2000 mm Cutting width 1200 mm Saw tilt 0–45° Cutting height at 90° 80 mm Cutting height at 45° 56 mm Maximum saw dimension 315 mm Maximum scoring dimension 120 mm Main saw speed 4000/6000 rpm Scoring speed 8000 rpm S1 continuous work motor power 5.5 kW S1 continuous work scoring motor power 0.75 kW Weight 460 kg

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Lsdpetz Smiofx Anceaa Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity

Condition: used, mileage: 157,689 km, power: 121 kW (164.51 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 19 m³, loading space length: 4,180 mm, loading space width: 2,250 mm, loading space height: 2,045 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Vehicle No. for customer inquiries: 165 ----Tail Lift: * Bär Carolift 750kg * Wheelbase: 4,035mm * Cargo area: L: 4,180mm W: 2,250mm H: 2,045mm ----Additional Features * Automatic climate control * Tail lift * Additional air suspension!! * 270° rear wing doors * Rain sensor Lasdpfx Anoyy Evkecoa * Start/stop system * Multifunction steering wheel * Radio CD / USB / AUX / SD * Particulate filter * Power steering * Partition wall * Central locking ----Equipment: * AdBlue tank * ABS * Airbag * On-board computer * ESP * 6-speed manual transmission * Front axle drive * Winter tires * Bluetooth hands-free kit * Central locking with remote control * Electric windows * Electrically heated side mirrors * Electronic immobilizer * Suspension: leaf springs * Payload (kg): 715kg * Full service history ----Technical Data: * Wheelbase: 4,035mm * Air suspension!!! * Cargo space dimensions: L: 4,180mm W: 2,250mm H: 2,045mm * Payload: 715kg * Tire size: 215/65R15C * Tire tread: approx. 50%-80% ----German vehicle! Timing belt and water pump NEW!! Invoice available! * 15,850.- Euro net plus VAT * Inspection/Emission (TÜV) valid until 02/2027 * For export to non-EU or EU countries, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible – please ask us for your individual quote! * We are happy to accept your used vehicle as part exchange!! * Financing/leasing options available, including for challenging cases * This description serves only for the general identification of the vehicle & does not constitute a warranty under sales law. * Information provided is not guaranteed to be complete. The details/descriptions/photos are non-binding and do not constitute guaranteed features. * We accept no liability for errors or obvious mistakes. * The buyer is obligated to independently verify the vehicle's condition and features before purchase. * Subject to prior sale, price changes, typing errors, and mistakes * Dear customer, please understand that due to the vehicle's age and mileage we prefer to sell to commercial customers or dealers. Thank you * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * Email: * * Internal number: 165

Condition: used, mileage: 364,386 km, power: 130 kW (176.75 HP), first registration: 10/2015, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,395 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Vehicle number for customer inquiries: 153 ----Tail lift: * Palfinger 1,000kg * Cargo compartment: L: 6,100mm W: 2,500mm H: 2,395mm * Payload: 1,915kg ----Additional features: * Air conditioning * Reversing camera * Cruise control * Air suspension * ABS * Trailer hitch with drawbar coupling * On-board computer * ESP * Tail lift * Power steering * Partition wall * Immobilizer ----Equipment: * AdBlue tank Ljdpfx Asyy Eu Tjnceaa * Multifunction steering wheel * Radio CD/USB/AUX * Winter tires * Twin tires (dual rear wheels) * Electric windows * Electrically heated side mirrors * Electronic immobilizer * Rear axle drive * Suspension: leaf/air * Emission class: EURO6 * 6-speed manual gearbox ----Technical data: * Wheelbase: 4,200mm * Cargo compartment dimensions: L: 6,100mm W: 2,500mm H: 2,395mm * Payload: 1,915kg * Tire size: 215/75R17.5 * Tire tread: 70%–95%!! ----German vehicle! * €12,850 net plus VAT * For export to non-EU countries or EU, a deposit will be withheld, refundable after successful customs clearance or delivery. * Worldwide delivery possible – please inquire for your individual offer! * We are happy to take your used vehicle in part exchange! * Financing/leasing available, also in difficult cases * This description is for general identification of the vehicle only and does not constitute a warranty in the legal sense of purchase. * The information does not claim to be complete. The specifications/descriptions/images are non-binding and do not constitute guaranteed characteristics. * We accept no liability for mistakes or obvious errors. * The buyer is obliged to verify the condition and equipment of the vehicles independently before purchase. * Subject to price changes, typing mistakes, errors, and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to commercial customers or dealers. Thank you. * Languages spoken: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * Internal reference number: 153

Condition: used, mileage: 175,935 km, power: 130 kW (176.75 HP), first registration: 05/2004, fuel type: diesel, overall weight: 7,490 kg, color: white, emission class: euro3, number of seats: 2, loading space volume: 36 m³, loading space length: 6,110 mm, loading space width: 2,495 mm, loading space height: 2,375 mm, Equipment: ABS, air conditioning, tail-lift, Vehicle No. for customer inquiries: 194 ----Tail Lift: * Dautel 1,000 kg * Wheelbase: 4,200 mm * Loading area: L: 6,110 mm W: 2,495 mm H: 2,375 mm * Payload: 2,120 kg ----Special Equipment: * Air conditioning * Fuel tank: 180 liters, plastic * Emission standard: Euro 3 * Cab: reinforced shock absorber * Cab: hydraulic tilting mechanism * Cab: L (long) * Electric window regulators * Side-mounted spare wheel holder * Body/chassis: chassis * Body variant: high roof * Fog lights * Electric sliding/tilting glass roof * Rear side windows left/right * Cab seats: sleeper configuration, 2 bunks * Sun visor * External sun visor * Additional (air) heater ----Standard Equipment: * Axle configuration: 4x2 * Exterior mirrors electrically adjustable and heated * Electric exterior mirrors left and right * Battery 115 Ah * Suspension: leaf spring/leaf spring * Alternator 80 A * 6-speed manual gearbox * Engine: 4.3 L - 130 kW Diesel (OM 904 LA) * Tires: 215/75 R 17.5 124/122 M * Front axle disc brakes * Driver’s cab seat: standard suspension seat Ledpfx Anjyy Evdjceaa * Telligent braking system with ABS * Immobilizer * Perm. total weight: 7.49 t ----Technical Data: * Wheelbase: 4,200 mm * Loading area: L: 6,110 mm W: 2,495 mm H: mm * Payload: 2,120 kg * Tire size: 215/75 R 17.5 * Tire tread: approx. 30%-20% ----German Vehicle! * €12,850 net plus VAT. * For export to non-EU countries or within the EU a deposit is required. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery available – please ask for your individual offer! * We are happy to accept your used vehicle in part exchange!! * Financing/leasing available even in challenging cases * This description serves only for general identification of the vehicle and does not constitute a guarantee in the legal sense of sale. * The information provided does not claim to be complete. The stated details/descriptions/photos are non-binding and are not to be considered guaranteed properties. * We accept no liability for errors or obvious mistakes. * The buyer is obliged to personally inspect the condition and equipment of the vehicle prior to purchase. * Subject to changes in price, typing errors, mistakes, and prior sale. * Dear customer, please understand that due to age and mileage, we prefer to sell this vehicle to commercial or trade clients. Thank you. * We speak: * Greek / Μιλάμε Ελληνικά Tel: +49.162.6567750 * Russian / Мы говорим на русском Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * Email: * * Internal Number: 194

Condition: used, mileage: 893,162 km, power: 412 kW (560.16 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 14,795 kg, maximum load weight: 11,205 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, next inspection (TÜV): 12/2024, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, number of seats: 2, loading space length: 6,600 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, crane, cruise control, differential lock, navigation system, parking heater, power assisted steering, seat heater, trailer coupling, * German vehicle * Condition, see photos * Documentation available * Over €27,500 invested in truck and crane in the last 3 years * All invoices, e.g. swivel cylinder crane available * Crane HIAB 185K * 15 m hook height * 2 hydraulic outriggers * 5+6 control circuit * Grapple control * Crane extension 11m=1.5t - 8.20m=2.1t - 5.40m=3.3t - 4.50t=4t * High seat steering * Trailer coupling GVW 44000 kg * 29000 kg possible without technical modification * Scania V8 engine 15607 ccm * Air-suspended luxury cab * Air conditioning * Auxiliary heating * Leaf/air suspension + raise/lower * Roof hatch * E-window * Electric mirrors * Stereo CD * Bed * Refrigerator * Reversing camera * Telephone * CB radio * Comfort seat * Heated seats * Multifunction steering wheel * Alloy wheels * Storage compartment * Differential lock * Retarder Lasdpsvhqcysfx Ancoa * High bulkhead * Stone tongs * Working lights * ABS * Wheelbase 3600 mm + 1400 mm * Unladen weight 14,795 kg * Payload 11,205 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 483,061 km, power: 350 kW (475.87 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 15,380 kg, maximum load weight: 10,620 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: other, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, * German vehicle * 1st hand * Condition, see photos * Complete documentation for crane + truck available * Palfinger PK 20.501 L TEC loading crane * Hook height 14.90 m * 5.90 m = 3,200 Kg. * 8.40 m = 2.150 Kg. * 10.90 m = 1,640 Kg. * 5th + 6th control circuit * 440° degree swivel angle * Internal hose guide * Working lights * High seat control * Start - Stop + speed increase * HPSC stability system * 2 hydraulic outriggers * Hydraulic Palfinger pallet fork at extra charge * Loading area 6.50 m x 2.45 m x .90 m * High bulkhead * Wooden loading floor with DIN lashing eyes * Trailer coupling * Towing capacity 24,620 kg * Technically possible 35,000 kg * Gross train weight 44,000 kg. * Stream Space comfort cab * 1 comfort couch * Refrigerator * Air conditioning * Auxiliary heating * Air-suspended driver's comfort seat * Heated seats * Electric windows * Electric heated mirrors * Electric roof hatch * Electric engine brake reinforced * Multifunction steering wheel * Cruise control * Active Brake Assist * Lane Keeping System Assistant * Stability control assistant * Differential lock * Bluetooth telephone prepared * 12.7 cm info display with video function * Aluminum tank with 630 liters * Storage box * Working lights * Reversing alarm Ledpfx Aevhpv Ssncoaa * Wheelbase 4,500 + 1,350 mm * GVW. 26,000 kg. * Unladen weight 15,380 kg. * Payload 10,620 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .