Used Constant for sale (1,228)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. Kledpfx Alsyxr T Tofjr The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, mileage: 67,200 km, power: 251 kW (341.26 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 17,455 kg, maximum load weight: 545 kg, overall weight: 18,000 kg, tire size: 315/60R22.5, axle configuration: 4x2, wheelbase: 4,725 mm, next inspection (TÜV): 08/2027, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, differential lock, fog lights, hydraulics, navigation system, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, long cab, double passenger bench, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, navigation system, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off (PTO), automatic transmission, differential lock, fog lights, storage box, leaf/air suspension, underrun protection, roof hatch, 4-point hydraulic outrigger, radio remote control, green environmental badge. Wheelbase: 4725 mm. Body: Ziegler superstructure with Bronto F32TLK telescopic mast with 4-way outrigger, work basket and remote control. Approx. 3140 operating hours. Vertical reach approx. 32m, horizontal reach approx. 25m. Fire-fighting body manufacturer: Ziegler. Superstructure manufacturer: Bronto Skylift. Special signaling system: Kodpeyxr E Asfx Alfelr - 10x front flashers Hänsch Sputnik nano - Martin horn 2297 GM - 2x front flashers Hänsch Sputnik SL ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted!

Condition: used, mileage: 65,035 km, power: 132 kW (179.47 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 4,663 kg, maximum load weight: 2,827 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,050 mm, next inspection (TÜV): 02/2027, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, cabin, cruise control, traction control, trailer coupling, Vehicle location: Bovenden, steel body, box type, 1x air-suspended seat, double passenger bench, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, 6-speed manual transmission, ABS (anti-lock braking system), ASR (traction control system), engine constant throttle, PTO (power take-off), leaf suspension, trailer coupling with air, light & hydraulic connections, ball hitch, lashing eyes, side underrun protection, swinging tailgates, roof hatch, green environmental badge. Kjdpfxeyxr Eio Alfslr Wheelbase: 3050 mm. Superstructure: Meiller 3-way tipper body, loading height approx. 1140 mm! ACCESSORY SPECIFICATIONS PROVIDED WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, mileage: 199,135 km, power: 184 kW (250.17 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 7,260 kg, maximum load weight: 7,740 kg, overall weight: 15,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 3,250 mm, next inspection (TÜV): 12/2025, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, registration: house, 1x air-suspended seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off (PTO), automatic transmission, differential lock, fog lights, rotating beacon, storage box, air suspension, trailer hitch with air and electric connections, rear stabilizers, lateral aluminum side guard, roof hatch, radio remote control, green environmental badge. Wheelbase: 3250 mm. Body: Meiller hook lift system with remote control. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Klodpfowzbzrsx Alfer

Condition: used, mileage: 236,985 km, power: 170 kW (231.14 HP), first registration: 06/2014, fuel type: diesel, empty load weight: 4,833 kg, maximum load weight: 2,657 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, next inspection (TÜV): 09/2025, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Kz. Haus, 1x comfort seat, double bench seat, heated seats, rear window, electric mirror, heated mirror, air conditioning, sun visor, cruise control, switch 6, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame panel, differential lock, leaf springs, tow bar air-light hydraulic, tow bar ball head, lashing eyes, U-protection, pendulum flaps, roof hatch, green environmental badge Wheelbase: 3020 mm Structure: Meiller 3-way tipping structure 4.1t front axle, rear axle hypoid 6.2t crown gear 325, differential lock in rear axle, electronic braking system with ABS and ASR, disc brakes on front and rear axles, stabilizer rear axle for extreme high loads, standard cockpit, construction site filter, ClassicSpace, daytime running lights, Meiller 5-piston pump type 254/1, engine brake, ESP, tank capacity: 120l, tipping platform floor with lashing recesses, auxiliary drive MB NA 60-1C with MPA! Loading height approx. 1150mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Ksdsvvbpmopfx Alfolr

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Kledpfx Aew D E Ubjlfor Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, Year of construction: 2001, functionality: fully functional, power: 13.5 kW (18.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 3,200 mm, saw blade diameter: 450 mm, Equipment: CE marking, scorer, We are offering this used Holzma HPP 11/32 panel saw, year of manufacture 2001. Manufacturer: Holzma Model: HPP 11/32 Year of manufacture: 2001 The machine is in perfect working condition. Complies with CE safety standards. Automatic panel saw for chip-free and precise cutting of coated and uncoated boards made from wood-based materials and those that can be processed like wood-based panels. Rear machine table equipped with the appropriate number of combi-profile rails with rollers for easy and gentle handling of panels. Machine table features extensive, abrasion-resistant table supports, which are recessed at the clamping jaw positions. This ensures lasting table stability and consistent cutting quality. Kljdpfx Aoyxqigjlfer Saw blade feed direction: from left to right against the square fence. Technical specifications: Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Max. clamping jaw opening: 130 mm Saw blade diameter: 450 mm Saw blade projection: 125 mm Saw carriage feed rate, forward: 5–100 m/min Return feed rate: constant 100 m/min Program carriage feed speed, forward/return: max. 80 m/min Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Minimum extraction speed at extraction nozzle: approx. 28 m/sec Chip extraction connection: 1 x 200 mm Pressure beam extraction connection: 1 x 160 mm Minimum operating temperature: +5°C Maximum operating temperature: +35°C Cutting length: 3,200 mm Cutting width: 3,200 mm Dismantling and collection to be organized by buyer. Location for collection: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, functionality: fully functional, working width: 1,100 mm, overall weight: 1,500 kg, power: 11 kW (14.96 HP), grinding belt speed: 18,500 mm/s, type of input current: three-phase, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 5.5 bar, grinding belt width: 1,100 mm, extraction nozzle diameter: 150 mm, input voltage: 400 V, operating pressure: 5 bar, pressure: 5.5 bar, workpiece width (max.): 1,100 mm, pass-through height: 160 mm, We are offering this used BULDOG 7 wide belt sander, year of manufacture 2012. Manufacturer: BULDOG Model: 7 Year: 2012 Condition: used Category ID: 1408 Type ID: 436 Machine type: Wide Belt Sander CE Safety Standard Wide belt sander/milling machine with a working width of 1100 mm The machine is in perfect working condition. The machine has a constant working height, making it ideal for integration into a production line with roller conveyors before and after the machine. Additional features: - Frequency inverter for the feed belt - Automatic feed belt tracking - Pneumatic interval air blasting system with oscillating nozzles for belt cleaning - Guide rails on both sides - Roller conveyors at the infeed and outfeed - Stroke of the shaft: 220 mm, adjustable from 80 mm up to 300 mm - Fixed machine table - Height adjustment via the sanding units - Up to 3 sanding units possible Working area: - Working width: 1,100 mm - Max. workpiece height: 160 mm - Min. workpiece height: 3 mm Kodpfxoyxqdko Alfelr - Sanding belt length: 2,620 mm - Sanding belt speed: approx. 18.5 m/s - Feed speed: 3-15 m/min (stepless) - Motor power: approx. 11 kW - Power supply: 400 V - Operating pressure: approx. 5.5 bar - Air consumption: 50-300 l/min - Extraction speed: approx. 20 m/s - Extraction connection: 150 mm diameter - Weight: approx. 1,500 kg Applications: - Solid wood - Veneer - MDF/engineered wood panels - Lacquered and filled surfaces Disassembly and collection at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, mileage: 60,000 km, power: 353 kW (479.95 HP), first registration: 05/2011, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 6x4, maximum load weight: 7,040 kg, empty load weight: 18,960 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, company headquarters, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, 16-speed manual transmission, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO (power take-off), high-mounted exhaust, differential lock, fog lights, beacon, storage box, leaf/air suspension, last axle liftable and steerable, trailer coupling with ball head, low-noise G1, underbody protection, roof hatch, radio remote control, green environmental badge. Wheelbase: 4200 mm. Body: AG HALLER SB7 suction excavator approx. 7.0m³ with remote control, air volume max. 25,000 m³/h at 20,000 Pa vacuum. MAN HydroDrive, ZF 16 S-252 OD transmission, air conditioning! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted! Klodpfx Aeyxpfyjlfer

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made from different materials without the need for constant abrasive changes. Klsdpfx Aoxmhxxslfer • Functionality: Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required.

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, empty load weight: 16,128 kg, maximum load weight: 9,872 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 01/2027, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,800 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, with accommodation, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (Anti-lock Braking System), traction control system (ASR), constant throttle, power take-off, differential lock, fog lights, work lights, storage box, leaf suspension, trailer coupling air-light-hydraulic, lashing eyes, underrun protection, swing tailgates, roof hatch, crane behind cabin, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, four hydraulic extensions, green environmental sticker. Kjdpeycgqgofx Alfslr Wheelbase: 3,900 mm. Body: 3-way tipper body with pneumatic tailgate operation, drop sides/rear wall & F255A.2.24 xe-dynamic crane, remote control. 9t front axle, rear axle planetary gear 13.4t, electronic braking system with ABS and ASR, ABS deactivatable, disc brake with full protection on front axle, drum brake on rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front axle, reinforced stabilizer on second rear axle, residual heat utilization, construction site air filter, seat belt monitoring, smoker package, PSM 2nd generation, reversing warning system, ClassicSpace, light and rain sensor, comfort closing system, off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, navigation system, multimedia cockpit, preparation for toll logging, daytime running lights, high performance engine brake, MB 124-10c MPA N-/M drive speed PTO, grounder, transmission oil cooling, ESP, lane keeping assist, traffic sign assist, Active Brake Assist 5. Load diagram: 3m-6150kg, 4.45m-4650kg, 6.45m-3115kg, 8.45m-2280kg, 10.60m-1775kg, 12.70m-1415kg, mechanical extension up to 19.25m-700kg possible for an additional charge! New vehicle from stock available with one-day registration in 01/2026! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 580,000 km, power: 375 kW (509.86 HP), first registration: 06/2010, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2025, brakes: retarder, color: black, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,000 mm, Year of construction: 2010, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Front axle load 8.0 t, driver's side airbag, trailer socket 15-pin + 7+7-pin, work lights, audio system: CD radio (Bluetooth incl. fixed telephone installation), 220 Ah battery, Bi-Xenon headlights, CB radio, comfort cockpit, aluminium air tanks, additional air tank, air horn(s) on cab roof, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assistant, cab interior: wood decor trim, cab with air suspension, rear axle H 8, crown wheel 485, interior lighting dimmable in blue, central locking system, fuel tank: 590 L aluminium, extendable cool box, 2-cylinder air compressor, MB 2C PTO, Voith retarder, acoustic reverse warning (external warning signal), electric sliding/lifting roof (glass), circuit breaker, seats in cab: driver's leather comfort seat, electric sunblind, 2-piece, telematics interface - Cotel, Telligent distance control, Telligent steered tag axle, transmission oil cooler. Additional equipment: Emission standard EURO 5, axle configuration: 6x2, trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, mirrors electrically adjustable and heated, wide-angle and heated mirrors left side, outside temperature display, rear axle differential lock, cab: Megaspace, suspension: leaf/air, electric windows, generator 80 A, interior filter: pollen filter, body/build: chassis, tag axle lifting system, model revision from 06/2008, engine 16.0 L - 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, single wheel tag axle, wheelbase 4800 mm, disc brakes, steel rims 9.00x22.5, Telligent shifting, Telligent brake system with ABS+ASR, CB radio preparation, telephone/fax preparation, cranked front axle, immobilizer, central locking including key, permissible gross weight 25.00 t Vehicle is sold WITHOUT SKIP CONTAINER!! REPLACEMENT ENGINE with 39,000 km Gearbox overhauled 6,000 km ago Lift/steerable axle All tires 70-80% Leather comfort seat etc. Kedpfx Alsxd In Usfelr

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking Kjdpfx Aoyuqmislfolr • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 The machine is in very good condition and ready for operation. Klsdpfx Aeyw Ud Selfsr - Maximum package width: 270 mm - Minimum package width: 50 mm - Maximum package length: 350 mm - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine Kledpoyw Tddsfx Alfer • User and maintenance manual and CE declaration of conformity

Condition: used, mileage: 323,295 km, power: 290 kW (394.29 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 12,970 kg, maximum load weight: 13,030 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 5,500 mm, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 9,040 mm, loading space width: 2,500 mm, loading space height: 2,098 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, tail-lift, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, large cab, 1 comfort seat, 1 bed, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, fog lights, tool box, air suspension, aluminum tank, last axle liftable, last axle hydraulically steered, lashing rails, underrun protection, mechanical ramps, side aluminum underrun guard, roof hatch, aluminum tail lift, upright, green environmental badge. Wheelbase: 5500 mm Kledpfxeyi Hpvo Alfer Superstructure: damaged insulated refrigerated box body with underfloor cooling unit Carrier Supra 950U & 2.5t tail lift BÄR BC 2500 S4. The vehicle has damage to the rear left of the body! Front axle air-suspended, 8t front axle, rear axle hypoid bevel gear 440 13t, 7.5t tag axle steered/relievable/liftable, electric brake system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, additional stabilizer on rear/tag axle, front underrun protection made of aluminum, smoker’s package, comfort lower bed, residual heat utilization, hot water auxiliary heater, start-off aid, ClassicSpace, comfort central locking, driving program "economy", Mercedes PowerShift 3, pre-equipment for toll recording, LED daytime running lights, high performance engine brake, powertrain pack 2, chrome package, ESP, lane keeping assist, attention assist, Active Brake Assist. Operating hours cooling unit approx. 2327h! Equipment details without guarantee, subject to change, prior sale and errors excepted!

Condition: used, mileage: 70,000 km, power: 62 kW (84.30 HP), first registration: 12/2015, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, First registration: 12/2015 Mileage: 70,000 km Net sale price: €8,780- VAT can be shown separately EURO 5 – Facelift Please no emails – we cannot process emails due to time constraints, thank you for your understanding! Further vehicles in stock: !!! Large selection !!! !!! Constant turnover of Volkswagen T5 Transporters !!! VAT can be shown separately Opening hours and additional information: Inspection and purchase possible without prior appointment: Mon–Thurs: 9:00 am to 4:00 pm Fri: 9:00 am to 1:00 pm Sat: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen For enquiries: Christian Hirsch If you have questions: Christian Hirsch Please try calling multiple times, as we are often with customers. More offers at ---- Additional T5 Transporters in stock Prices: Price depends on: - Mileage - First registration - Visual condition - Technical condition - Valid TÜV certificate / New TÜV (MOT) - Service due - New service - 1-seater - 2-seater - 3-seater ---- VAT can be shown separately If you have questions: Christian Hirsch !!! Emails will not be answered !!! For enquiries: Christian Hirsch Please try calling multiple times, as we are often with customers. ---- Opening hours and further information: Inspection/purchase without prior appointment possible: Mon–Thurs: 9:00 am to 4:00 pm Fri: 9:00 am to 1:00 pm Sat: 9:00 am to 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Please no emails – we are unable to respond to emails due to time constraints, thank you for your understanding! ---- Further vehicles in stock: Kedpfjvh S E Nex Alfelr VAT can be shown separately For enquiries: Christian Hirsch Special Equipment: Driver’s cab floor covering: rubber, Electric package 1, rear tailgate with window, heated rear window with wiper, high bulkhead with fixed window, multi-function display/on-board computer, instrument cluster with 2 dials, rear park distance control, smoker package, spare wheel in normal tyres, sliding door on left (cargo/passenger compartment), front and rear mud flaps, Robust seat covers, driver's seat with lumbar support, half-height hardboard lining in cargo/passenger compartment. Additional equipment: Driver and passenger airbags, left exterior mirror aspherical, right exterior mirror convex, Brake Assist System (HBA), vehicle without window in cargo/passenger area, vehicle without child safety lock in cargo/passenger area, body type: panel van, body variant: standard roof, headlight range adjustment, truck registration, engine: 2.0 litre – 62 kW TDI, pollen filter, wheelbase 3000 mm, low emission according to Euro 5, H4 headlights, right sliding door (cargo/passenger compartment), front passenger seat adjustable, driver’s seat adjustable, first seat row in cargo/passenger area omitted, heat-insulating glazing, permissible total weight 2.80 tonnes. ---- More vehicles at Equipment details have been determined via VIN query – technical errors may occur. All information provided online is non-binding and for general description only. They do not represent guaranteed characteristics. The seller is not liable for typographical or data transmission errors / changes / input errors. Subject to errors and prior sale.

Condition: used, mileage: 525,200 km, power: 290 kW (394.29 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,750 mm, loading space volume: 41 m³, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,280 mm, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, tail-lift, * Frigoblock refrigeration unit for in-transit operation with generator * Single-chamber refrigerated cargo area Kledjyw Dpqepfx Alfor * Constant throttle valve * Navigation system * Lane keeping assistant * Heated seats * Cruise control with distance warning and emergency braking (Active Brake Assist) * Rear-view camera * Wüllhorst tail lift, 2,500 kg capacity * Automatic transmission * Euro 6 * Differential lock * Full air suspension * Rear-view camera * Spoiler * Automatic climate control * Cargo space interior: 7,300 x 2,480 x 2,200 mm * Tyres: 1st axle=385/55 R 22.5, 2nd axle=315/70 R 22.5, 3rd axle=385/55 R 22.5

Condition: used, mileage: 287,130 km, power: 213 kW (289.60 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 9,054 kg, maximum load weight: 8,946 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 3,575 mm, next inspection (TÜV): 07/2026, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, registered as house, 1x comfort seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, AS-Tronic automatic transmission, work lights, leaf suspension, trailer coupling with air and lights, container locking, underride guard, rear support, side aluminum underrun protection, roof hatch, green environmental sticker. Wheelbase: 3575 mm. Body: 14t telescopic skip system Hiab Multilift SLT 142. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors reserved! Kledpjx Dc Uiefx Alfor

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: 8x8, wheelbase: 4,775 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, house registration, 1x comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO, automatic, differential lock, fog lights, work lights, leaf suspension, trailer hitch air+light, hydraulic transverse locking, green environmental sticker Wheelbase: 4775 mm. Body: 26t Hyva T26-55-S hooklift system for containers from 4.3m to 6.6m. Gearbox ZF 12.28, ABS, EBS, MAN EVBec high-performance engine brake, drum brakes on all axles, emergency brake assist, air conditioning, MAN EasyStart, ESP, differential lock on all axles, LED daytime running lights, lower radiator protection, high build, KSM module, cool box, PTO, engine dependent, flywheel, spline hub 8x32x36 (DIN ISO 14), f=1.233, 650/720 Nm continuous/short! Frame length approx. 6400mm! Kledpfxewnp D Is Alfjr Frame height approx. 1210mm! Upon request and for an extra charge, also available with a different hooklift system! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, empty load weight: 10,312 kg, maximum load weight: 22,688 kg, overall weight: 33,000 kg, axle configuration: 6x6, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, registration at location, 1x comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO (power take-off), automatic transmission, differential lock, fog lights, leaf spring suspension, trailer coupling air+electric, green environmental badge. Wheelbase: 3900 mm, ZF 12 TX transmission, ABS, EBS, MAN EVBec high-performance engine brake, drum brakes on all axles, air conditioning, differential locks on all axles, LED daytime running lights, high-profile design, PTO NTX/10C. Frame length approx. 5500mm! Frame height approx. 1250mm! Day registration on 18.12.2025! ACCESSORY INFORMATION WITHOUT WARRANTY; subject to change, prior sale, and errors! Kodpfxjxdlqto Alfolr

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Kodpfx Aleywuqrefjlr Terminal: front left 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml Ksdpfx Asywuczslfslr The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: new, Year of construction: 2026, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Ksdpfevu Uh Tex Alfelr Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: used, mileage: 134,000 km, power: 170 kW (231.14 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 6,000 kg, maximum load weight: 7,500 kg, overall weight: 13,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 4,160 mm, next inspection (TÜV): 11/2026, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, cruise control, differential lock, fog lights, immobilizer system, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, ClassicSpace, short cab, suspension seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO (power take-off), chassis side cladding, differential lock, fog lights, work lights, leaf suspension, trailer hitch (ball head), trailer hitch (air+electric supply), underrun protection, roof hatch, green environmental badge Wheelbase: 4160 mm, 6t front axle, rear axle hypoid 11t, crown wheel 390, ABS brakes, ABS switchable, drum brakes on front and rear axles, condensate monitoring for compressed air system, rear axle stabilizer, classic cockpit, pollen filter, PSM, ClassicSpace, off-road driving program, Mercedes PowerShift 3, pre-installation for toll system, daytime running lights, high performance engine brake, NA MB 60-2c MPA low-speed torque Approx. 5.5m body length Kledpfx Aloylc E Eefsr ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, Subject to change, prior sale and errors excepted! - .