Used Cnc Dosing Robot for sale (12,154)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights Nlodpfx Aeu Tln Nomysd - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Nlsdpfev R E Rdjx Amyed Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Nlsdpfx Ajhik Ezsmyod Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Nedpfx Amoxcgtgeyold Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right Nlodpfxsw A Af Is Amyod - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary change table and 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 ABB IRC5 control unit with Tech-In panel HF milling spindle PERSKE model KRS 35.3-2, power: 1.2 kW, speed: 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight: 380 kg Table size (Table 1) with aluminum plate: 500 x 500 mm Table size (Table 2) with Pertinax plate: 600 x 600 mm Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete system is set up as a compact milling cell with a rotary change table - Control cabinet and robot controller cabinet are both compactly and solidly mounted on the milling cell Nledsyaq Nuspfx Amyjd - Motorized rotary indexing table (likely WEISS brand) with fixed indexing step: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - While one side of the rotary table is being milled, the other side can be loaded with new workpieces in parallel - Front safety guard with light barrier for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge machining, milling cut-outs, drilling, etc. Also suitable for plastic processing or similar applications. If interested, please request a video from us.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Nledpet Ac Efsfx Amyod Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping Njdpfoty A Ehox Amyjld - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II M 500U Max. machining diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck, B-210, diameter 254 mm - Tool Eye Nledpfxsznnl Ie Amysd - C-axis - NC tailstock - reinforced coolant pump - chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2000, Machine is with SK 30 Nodpfxjznmqis Amyjld 20.000 rpm Parts shown by hand not come.

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: Kuka Type: KR8 R1620 Cybertech Year of manufacture: 2017 Reach: 1,620 mm Weight: 165 kg Payload: 8 kg Kuka controller KRC4 smallsize-2 Controller with 400V, 3-phase power Weight: 72 kg Nledpsxtb E Sofx Amyed KUKA System Software KSS SR 8.5.4 Kuka SmartPad KCP4 Kuka connection cable ä22726

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Nljdpfeznmbusx Amyod

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Nlodpfx Amjdzqm Rjyed Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fanuc control, Nodpfxoznlkns Amysld main and counter spindle, two BT55 turrets, powered tools, steady rest, gantry loader for loading shaft components, chip conveyor with filtration.

Condition: good (used), Year of construction: 2002, CNC LATHE MUPEM WIN 65 2002 Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3000 rpm Main spindle motor power: 11/15 kW MAIN TURRET Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6790 N CROSS SLIDE Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8000 at 50 bar Maximum working stroke at Z1: 230 mm Nlsdowc Arujpfx Amyed ADDITIONAL LOWER TURRET Number of tools: 8 VDI-20 VERTICAL SLIDES Number of vertical slides: 2 Maximum working stroke in X3 / X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1 / X2: 8000 at 50 bar Machine height: 1700 mm Machine area: 2900 x 1700 mm Machine weight: 4100 kg

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: ABB Type: IRB6700-205/2.80 Year of manufacture: 2017 Includes controller Njdpfx Amewrcwcoyeld Includes handheld device Includes cable set Weight: approx. 1,260 kg 2 units available Optional: with traversing axis of approx. 25 m Type: IRBT6004 22726

Condition: used, Year of construction: 2017, Industrial robot Manufacturer: Kuka Type: KR20-3 Year of manufacture: 2017 Operating hours: 8,700 Nedpsx U Dadefx Amysld Reach: 1,611 mm Weight: 254 kg Payload: 20 kg Kuka KRC4 controller Weight: 145 kg Software version: V8.5.4 Interface: X11 Interface: Beckhoff EtherCat module Kuka touch panel Kuka connecting cables 22726

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Type: KR210 R3100 ultra with 4.5m linear axis Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Nljdpfxsxuwlws Amysd Kuka controller KRC4 Year of manufacture: 2014 Weight: 163 kg Software KSS 8.5.4 Kuka TouchPad KCP4 Kuka connection cables Kuka linear axis Type: KL1500-3 T Year of manufacture: 2013 Length approx. 4.5 m Travel distance approx. 3.5 m Cable carrier KRC4 Weight: 2,200 kg ä22726

Condition: good (used), Year of construction: 2008, Industrial robot Kuka KR5sixx R850 (newly painted in orange) Year of manufacture: 2007, 2008 Reach: 850 mm Weight: 29 kg Payload: 5 kg Controller: KRC2sr Weight: 34 kg Kuka KCP2ed05 Kuka connection cable, 5 m Nedpog Sxadefx Amysld ä22726

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00643, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2014.04. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Nsdpfoznk Hzox Amyjld Year of Manufacture Robot: 2014.04 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.03 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR120 R2500 pro with Kräutner DKP1 tilting rotary table Year of manufacture: 2012 Operating hours: under 200 hours Reach: 2,496 mm Weight: 1,049 kg Payload: 120 kg Kuka KRC4 controller with 2 additional axes Year of manufacture: 2012 Weight: 140 kg Software: KSS 8.2.15 User Tech 3.1.2 Expert Tech 3.1.0 Gripper-Spot Tech 3.0.1 Remote Service 1.0.0 Interface X11 for safety circuit Interface Beckhoff EtherCat for digital I/O Kuka TouchPad KCP4 Nledpfsxp N A Rox Amysd Kuka connecting cables ä22726

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Type: KR120 R2900 extra Year of manufacture: 2014 Reach: 2,896 mm Weight: 1,084 kg Payload: 120 kg Kuka controller KRC4 Year of manufacture: 2014 Weight: 163 kg Nledpfx Amsxp Nvqeyjd Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connection cables ä22726

Condition: good (used), Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR16-2-F Foundry Year of manufacture: 2012 Operating hours: approx. 11,000 hours Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka controller KRC2ed05 Year of manufacture: 2009 Weight: 207 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connecting cables 7m/15m ä22726 Nljdpfx Aotukiqemysd

Condition: used, Year of construction: 2018, Industrial robot Manufacturer: Kuka Type: KR16 R1610 Cybertech Nedpfx Amoxtdaljyold Year of manufacture: 2018 Reach: 1,612 mm Weight: 263 kg Payload: 16 kg Kuka controller KRC4 Weight: 145 kg Software version: V8.5.4 Kuka touch panel Kuka connecting cables ä22726

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Type: KR210 R3100 ultra Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Kuka controller KRC4 Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connecting cables ä22726 Nledpfx Amoxp Nuyjysd