Used Buderus Ge315 Heating Boiler 230 Kw (0295) for sale (43,624)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Pgodpfxevf E Avj Ahysk Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, wire diameter (max.): 0.3 mm, overall weight: 250 kg, product length (max.): 800 mm, number of axes: 3, wire diameter (min.): 0.1 mm, This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details. • Spindle speed: 150–2000 rpm • Spindle drive power: 0.75 kW (at 100% duty cycle) • Tool changer: Automatic, 10 stations • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min Psdpfx Ahsy Hi T Toysgk • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz • Availability: Not specified

Condition: excellent (used), Year of construction: 2012, operating hours: 106,362 h, functionality: fully functional, Premium screw compressor Atlas Copco GA110VSD. Year of manufacture 2012. New stage at 50,000 hours. With WRG. Psdpfx Aoul U Tyohyegk 8.50 bar with 20.70 m3/min.

Condition: excellent (used), Year of construction: 2016, operating hours: 44,382 h, functionality: fully functional, Second hand screw compressor CompAir L55RS. Year 2016 Pgsdpfx Aevpqkgehyok 55 kW, 10 bar 10.31 m3/min

Condition: good (used), electric motor, three-phase motor Pgedpfxov Inhts Ahyok -Manufacturer: MEZ, Electric motor type AP132M-4 -Power: 7.5 kW -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Bolt circle diameter: 265 mm -Recess Ø: 230 mm -Flange outer Ø: 300 mm -Design: B5 -Protection rating: IP44 -Dimensions: 520/360/H298 mm -Weight: 83 kg

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Pgsdpfx Aeyvgf Dehyok Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: new, Boiler with feeder Ahena 250KW Solid/dry fuel boiler Output: 250 kW Capacity: 1100 litres Psdpfx Ahey E Sdroyogk Year of manufacture: 2016 CE certificate Brand new boiler, never installed

Condition: good (used), Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Manufacturer: COMAR, chip conveyor comes from a MIKRON VC 500D -Type: VC 500D -Conveyor belt width: 230 mm -Outlet height: 1100 mm -Drive: 0.15 kW / 14 rpm (2.40 m/min) -Individual components: see photos -Dimensions: 720/2630/H1575 mm -Weight: 727 kg Pjdpfx Ahoy Ezacoysgk

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 Pedpsg N Dhwjfx Ahyogk -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Connection: Input 600x1220 mm -Connection: Output 680x680 mm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7700 € 148.61 € Schwenkrahmen 2730x27x0,9 mm 35/70 m/min 230 mm 230 mm 320x130 mm rund 210 mm, quadrat 190 rund 130 mm, quadrat 100 rund 180 mm, quadrat 150 805 mm Pgodswirybepfx Ahyjk 0.37 kW 1.3 kW 0.12 kW 1350 mm 700 mm 1300 mm 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 9400 € 181.42 € Schwenkrahmen 2730x27x0,9 mm 35-70 m/min 230 mm 230 mm 240x230 mm 590 mm 0.37 kW Pgedpjwiqw Ejfx Ahyek 1.3 kW 0.12 kW 1700 mm 800 mm 1500 mm 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 160788 € 3038.89 € 3 kW 12 mm 6 mm 6 mm 3 mm 6 mm 26,5 kW 250 mm 16 mm 160 x 160 mm 200 x 150 mm 6000 mm 58 kg/m +/- 0,2 mm +/- 0,05 mm rund, quadratisch, rechte Psdpfx Ahjwiqr Asyogk 40 m/min 94 m/min 30 m/min 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request

Condition: used, used, in good condition, low hours Make: Schuko Model: L 400 Machine No. 0390 For shavings / wood chips Slow-running approx. 1400 rpm Motor: 11 kW Connection diameter: 400 mm Pressure approx. 1836 m³/h Pgsdpfxoycxh De Ahyek Air output: 11,760 m³/h Steel impeller Space requirement approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 2020, Extruder, co-rotating twin screw extruder, twin screw extruders, plastic injection molding machine Pgodpfx Ahoytgwbeyjk -Engine power: 55 kW - Output: approx. 200 to 300 kg/h -Screw diameter: 51.7 mm -Speed: 60-400 rpm -Dimensions: 1250/4530/H1080 mm -Weight: 3000 kg

Condition: good (used), power: 95 kW (129.16 HP), fuel type: diesel, first registration: 01/2009, Year of construction: 2009, operating hours: 10,899 h, = Additional Options and Accessories = - Central lubrication = Notes = Liebherr A900C - 95 kW - Central lubrication - Year of manufacture: 2009 WLHZ1002TZK046186 Operating hours: 10,899 95 kW engine Central lubrication = Further Information = Pgodpfx Aoydnvgshyjk Model year: 2009 Drive: Wheeled Gross vehicle weight: 18,000 kg Technical condition: good Visual condition: good

Condition: good (used), power: 95 kW (129.16 HP), fuel type: diesel, color: yellow, first registration: 01/2009, Year of construction: 2009, operating hours: 10,839 h, Liebherr A900C - 95 kW - Central Lubrication - Year of Manufacture: 2009 WLHZ1002VZK046325 Hours: 10,839 95 kW Engine Central Lubrication System Psdpfjydnvmex Ahyogk = Further Information = Model year: 2009 Drive: Wheeled Gross weight: 18,000 kg Technical condition: Good Optical condition: Good Contact VAEX The Truck Traders for further information.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,800 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Mazak, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 1,800 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.001 mm, power: 2 kW (2.72 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, safety light barrier, Mazak Optiplex Nexus 3015 Fiber 2.0 kW Large Format Laser Cutting System, 2 kW incl. shuttle table and extraction system Only 1,890 operating hours Pgjdpeyhbinjfx Ahysk Original price €330,000 net Machine has been regularly serviced by Mazak. Year of manufacture: 2018. The machine has been very well maintained, regularly cleaned, and serviced. It looks almost like new! Complete technical specifications are available on request. Transport can be arranged. The indicated price is net, plus VAT.

Condition: good (used), mileage: 100,975 km, power: 172 kW (233.85 HP), first registration: 11/2018, fuel type: diesel, tire size: 205/75R17.5, axle configuration: 4x2, wheelbase: 3,150 mm, fuel: diesel, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,150 mm, total width: 2,250 mm, permissible axle load (axle 1): 3,200 kg, permissible axle load (axle 2): 5,000 kg, Year of construction: 2018, Equipment: ABS, AdBlue, EBS, USB port, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, soot filter, spoiler, traction control, trailer coupling, = Additional options and equipment = - Rear working lights - Front working lights - Armrest - Audio control on steering wheel - AUX input - Outside temperature display - Construction warning light - Becker mount - Heated mirrors - Leaf suspension - Power brake booster - DAB radio - Roof spoiler - Rev counter - Heated electric mirrors - Additional lighting - Driver’s seat height adjustment - Remote central locking - High beam - Windshield - Low noise - Speed limiter - Tinted glass - Hydraulic system - Height-adjustable steering wheel - Height-adjustable front seats - Cabin - Foldable exterior mirrors - Air conditioning - LED lighting - Air-suspended seats - Air horn - Air horns - Air suspension - Multiple beds - Metallic paint - Center armrest - Multifunction steering wheel - Particulate filter - Radio/CD player - Spare wheel - Beacon - Reversing camera - Disc brakes - Headlamp height adjustment - Sleeper cab - Sun visor - Lane keep assist - Immobilizer - Tachograph - Touchscreen - Toolbox = Notes = Showtruck Daf LF 230 Car Transporter, 4-5 vehicles, registered 11/2018, one owner, with only 100,000 km! For questions or more information please call us or write to us by e-mail at or . Trailer dimensions: Upper deck: 1230 cm long, 224 cm wide Pgodpfx Aoxvry Sohyek Lower deck: 990 cm long, 202 cm wide = Further information = Technical information Number of cylinders: 6 Engine displacement: 6,700 cc Axle configuration Tire size: 205/75R17.5 Axle brand: sava Avant 4 Brakes: Disc brakes Front axle: Max. axle load: 3,200 kg; Steered; Left tire tread: 70%; Right tire tread: 70%; Suspension: leaf springs Rear axle: Max. axle load: 5,000 kg; Left tire tread: 70%; Right tire tread: 70%; Suspension: air suspension Weights Unladen weight: 3,167 kg Payload: 6,480 kg Gross vehicle weight (GVW): 16,000 kg Functional Body manufacturer: Veldhuizen AutoTransporter Trailer Max. number of passenger cars: 5 Maintenance APK (Technical Inspection): New inspection (TÜV) upon delivery Condition Technical condition: good Optical condition: good Damages: none = Company information = Nidro cars Holland is located in the centre of the country and is your address for the purchase of your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: SEE OUR ENTIRE STOCK AT All types of trade-ins are welcome! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: good (used), electric motor, three-phase motor -Manufacturer: ATB Nordenham, explosion-proof electric motor -Type: CD 90L2-8 -Power: 0.55 kW -Speed: 690 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP55 -Terminal box: EAR 80 Pgodpoy Ed Dkjfx Ahyek -Number: 2x motors available -Price: per piece -Dimensions: 345/176/H270 mm -Weight: 32.1 kg/pc.

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type RD 92 -Drive: 15 kW -Speed: 2950 rpm -Volume flow rate: 7500 m³/h -Pressure: 8300 Pa -Inlet connection: Ø 220 mm -Outlet connection: Ø 220 mm -Protection class: IP 54 -Fan wheel: Ø 720 x 60 mm Quantity: 1 piece available Pjdpfx Aewnccqehysgk -Dimensions: 960/910/H1075 mm -Weight: 210 kg

Condition: new, functionality: fully functional, fuel type: diesel, tire size: 245/70 R17,5, axle configuration: 2 axles, wheelbase: 3,150 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: parabolic leaf (spring), Year of construction: 2026, Day cab, sun visor, fog lights in bumper, Comfort air driver’s seat, double passenger seat, air conditioning, PX-7 engine, 230 hp, Powerline automatic transmission, 8 speeds, exhaust engine brake, differential lock, vertical exhaust, rear tire, PTO at gearbox Pgedoy Hkf Depfx Ahyek

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1,013 kW (1,377.30 HP), On offer, new Brand: MTU Type: 8V 4000 GS L64 FNER Year of manufacture: 2025 Power: 1013 kW Voltage: 400 V 50 Hz Operating hours: 0 With manufacturer's warranty Scope of delivery: Gen set Gas train ramp MMC control panel Psdpfx Aoy Hiwlohyjgk

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1,521 kW (2,067.98 HP), input voltage: 400 V, On offer: new Brand: Mtu Type: 12v 4000 gs l64 FNER Year of manufacture: 2025 Power: 1521 kW Psdsy Hivuspfx Ahyjgk Voltage: 400V 50Hz Operating hours: 0 With manufacturer’s warranty Scope of delivery: gen set gas train ramp MMC control panel

Condition: like new (used), Year of construction: 2019, operating hours: 10,800 h, For sale: complete containerized CHP (Combined Heat and Power) unit. Dimensions: 17x3x3.5 m (LxWxH). Equipped with MWM gas generator. Brand: MWM. Model: 2020 V20. Year of manufacture: 2019. Power output: 2000 kW. Voltage: 400 V. Operating hours: 10,800. In mint condition, ready for immediate use. Fitted with emergency cooler and exhaust heat exchanger. Pgodpfx Aey Him Tjhyjk

Condition: used, mileage: 10 km, power: 88 kW (119.65 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,500 mm, first registration: 08/2024, color: silver, number of seats: 3, Year of construction: 2024, Equipment: air conditioning, airbag, central locking, onboard computer, parking sensors, = Additional options and accessories = - Advanced Emengency Braking System - Alloy wheels - Apple CarPlay - DAB + Receiver - Driver airbag - Electric mirrors - Electric windows - Panelled loading space - Partition wall without glass - Passenger airbag - Rear parking sensors - Rear view camera - Remote central locking = More information = Pjdevlxxdspfx Ahysgk General information Number of doors: 3 Registration number: V-26-GZL Serial number: VF6T82E0X72579824 Technical information Max. front axle load: 1625 kg Max. rear axle load: 1650 kg Battery: 52 kWh Battery charging power: 2 kW Measures length/height: L2H1 Dimensions (LxW): 548 x 196 cm Weights Empty weight: 1.860 kg Carrying capacity: 1.210 kg GVW: 3.070 kg Max. towing weight: 3.990 kg Maintenance APK (MOT): tested until 08/2028