Used Biesse Hsk Aggregate for sale (2,109)

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Tedpfxob Uhuhj Acnob -Max. Pressure: 80 bar -Liter output: 18 l/min -Hydraulic tank: liters -Dimensions: 700/355/H830 mm -Weight: 200 kg

Year of construction: 1981, condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm Tjdpfxjchp Aze Acnob -Weight: 248 kg

Condition: ready for operation (used), Hydraulic unit, consisting of an oil tank with a drive motor mounted on top, with a flanged hydraulic pump, and two valve blocks located above it. 1. Valve block, manufacturer: WANDFLUH-Hydraulik Maximum pressure: 160 bar Delivery rate: 20 l/min 2. Valve block, manufacturer: BOSCH Operating pressure: 319 bar Drive motor: 220/380 V, 1420 rpm, 2.2 kW Space requirement: 700 x 620 x 1050 mm Tedsdz Dliepfx Acnjb Weight including hydraulic oil (approx. 90 l): 193 kg

Condition: used, Year of construction: 1997, - Edge banding unit - Cutting unit - Milling unit - Fine milling unit - Scraper blade Todjd Inktjpfx Acneb - Buffing unit

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process Tedefbmqtepfx Acneb No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: Schorch 1.5 kW 1405 rpm -Sale: in the current condition as seen Tsded R N Idopfx Acnsb -Dimensions: 490/340/H585 mm -Weight: 46 kg

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen Tsdpfxed E Ixzj Acnjb • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm Tsdpfx Acofth Sbjnsb -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

Condition: good (used), Bitzer compressor unit Type: HSK 7471-90 (x3) Volume: 250 m3 / h (x3) Tsdpfx Acjg Rcfvjnjb Cooling capacity: 435 kW at -10 ° C / 40 ° C, 280 kW at -20 ° C / 40 ° C Refrigerant: R404A Dimensions: 3600 x 1350 x 2600 mm Pieces in stock: 1 Stock number: Z9 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: new, maximum load weight: 14,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,400 mm, total width: 2,550 mm, total height: 1,146 mm, Year of construction: 2027, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ64 SIERRA * Only 3,900 kg unladen weight * Air suspension * 2 single axles, manufacturer SAF, 12 t with drum brakes, including safety cables Todpehnakvjfx Acnob * Tires 275/70 R 22.5 on steel rims * Air tank made of aluminum * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple bracket * Paint finish: frame/bolster color graphite black, stake color carmine red * Drawbar type GNZ 27, drawbar eye Ø 40 mm + standing area on drawbar * Lateral underrun protection according to ECE?R 73 * For the transport of 3 x 2m / 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x DOLL MAMMUT bolsters + stakes Plus TÜV inspection. Ex works Mildenau. All prices plus registration and legally applicable value-added tax. Subject to change and prior sale. Further information on request. Specifications subject to change without notice. Illustrations may differ from the original. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 1,075 mm, Year of construction: 2026, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ59-L ALPHA * Only 3,100 kg tare weight * Air suspension * 2 single axles, manufacturer SAF, 9 tons with disc brakes, including safety cables * Tires: 275/70 R 22.5 on high-gloss aluminum rims * Air tank made of aluminum * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple cable * Paint: frame/bolster color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + support surface on the drawbar * Lateral impact protection according to ECE?R 73 * For the transport of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * ExTe D7 bolster, ExTe D7 EURO-C stakes Plus TÜV inspection. Ex works Mildenau. All prices plus registration and legally applicable VAT. Subject to change and prior sale. Further information upon request. Information without guarantee. Illustrations may differ from the original. DOLL lightweight construction: This DOLL 2-axle trailer represents modern vehicle construction and efficient timber transport. The trailer offers the proven DOLL quality – practical and safe. Contact: Tsdpfxohnak De Acnob Niclas Lott Tel.:

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Tjdeg Dgr Hspfx Acnob (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Tsdpotrl R Ajfx Acneb Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Tsdpfxjhw Db Ij Acnsb Radius R2mm. HSK63 holder. Available immediately.

Condition: used, mileage: 69,178 km, power: 130 kW (176.75 HP), first registration: 02/2014, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 04/2023, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 3 m³, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, * ABS * ASR * ESP * Radio * On-board computer * Cruise control * Electrically adjustable mirrors * Heated mirrors * Sunroof * Rear window * Driver's air suspension seat * Differential lock, rear axle * Rotating beacon, orange * Trailer coupling * 2-line air connection * Ball coupling Todpfx Aoita Ryscnob * Hydraulic connection for trailer * 6-speed * Suspension: leaf spring * Payload: 2590 ----Body: Meiller 3-way steel, front wall raised, spring-relieved side panels on the left and right. For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: new, Year of construction: 2022, NWC110 Cummins Engine Newpower Generator The unit is new, complete with controls, diesel tank, exhaust and batteries. Technical specifications Engine : Cummins 6BTA 5.9-G2, 6cylinder, water cooled Generator: Newpower NW/N 110 Todpjh U Nxfofx Acneb Continuous power: 80 kW / 100 kVA Maximum power: 88 kW / 110 kVA Connection:4P circuit breaker, (optional sockets, optional automatic transfer switch..) Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Diesel tank: 8-10 operating hours Dimensions (LxWxH): 3000x 1000x1745mm Weight: 1600 kg Network monitoring, soundproof additional costs; Automatic transfer switch: € 980 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to give an exact freight price, please send me an inquiry with your data and your

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in Todpfx Acehy Tlrjnsb flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 1000004052, functionality: fully functional, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology feed rate 1-25 mb/min Tedpeu Suh Sofx Acnsb wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm line composition - 2 milling heads height 44mm - EVA / PUR overlay unit - AIR FORCE - drills - pre-profile cutters - rounders - groove saw - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. Todpfxjq Igyvo Acnjb - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- Todpfx Aceq I Nvionob ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. Tjdpfxeq Ngb Ds Acnob 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Tedpfxoq Nyuve Acnsb When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing Introduction An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials. Features of HSI Impact Crusher High Crushing Efficiency Tedpfxoq Ny Sas Acnjb The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results. Versatile Applications Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal. Adjustable Output Size Hydraulic or mechanical adjustment systems allow easy control of product size. Durable Components Wear-resistant blow bars and liners extend service life and reduce maintenance costs. Easy Maintenance Quick access doors and modular design simplify inspection and part replacement. Energy Efficiency Optimized rotor design and balanced operation minimize energy consumption. Technical Specifications (Typical Range) Model:1214 Max input size： 300 mm, Capacity: 100-140 t/h Model:1315 Max input size: 350mm Capacity: 150-200 t/h Specifications may vary depending on material hardness and feed size. Applications Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials. Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production. Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete. Recycling: Effective for crushing concrete, asphalt, and demolition waste. Why Choose a Reliable Impact Crusher Manufacturer Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability. Impact Crusher for Sale Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups. Conclusion An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): Tjdpfxsq N U Due Acneb - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, Year of construction: 2026, Josan Power Generators – Proven, Durable Quality! We also offer leasing and financing. Don’t hesitate to ask! ‼️5-Year Warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and much more. Available for pickup in Heilbronn. We also offer affordable shipping – simply inquire! Models available up to 1000 kW. All units equipped with electric start diesel engines, e.g., 56 kW, 1500 rpm. Compare prices and check what type of engine you get for what price. Ask what is actually produced in Germany or Europe. We also offer Cummins engine options for an additional charge. Top quality at discount prices! We are here for you in Heilbronn. German company, German laws, German service! All-inclusive pricing. With our certified German electricians, we offer fast and direct support if you ever need assistance. We also rent generators for uninterrupted service. We call everyone back. Discounts available for orders of 10 units or more. Contact us – we call everyone back. Generator 320 kVA / 250 kW: ➡️ Proven engine ➡️ Proven 6-cylinder diesel engine ➡️ Very quiet, only approx. 65 dB ➡️ 3-phase, 380/400 V, 220/230 V, 50 Hz ➡️ AVR regulation ➡️ Dimensions approx. 3700mm x 1300 x 1910mm ▶️ Weight approx. 2,400 kg ➡️ Electric starter ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Optional: 1 socket 400V 125A ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ CE certificate ➡️ With battery charger ➡️ With ATS Net price: €22,900.00 Generator 150 kVA / 120 kW: ➡️ 380/400V, 220/230V, 50Hz ➡️ AVR regulation ➡️ Very quiet, only approx. 65 dB ➡️ Dimensions approx. 2800 x 1100 x 1500mm ▶️ Weight 1,390kg ➡️ Proven 6-cylinder diesel engine, 132 kW / 1500 rpm ➡️ Electric starter ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Optional: 1 socket 400V 125A ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ CE certificate ➡️ With ATS ➡️ With battery charger Net price: €10,900.00 Generator 63 kVA / 50 kW: ➡️ 380/400V, 220/230V, 50Hz ➡️ Very quiet, only approx. 65 dB ➡️ Proven 4-cylinder diesel engine, 56 kW, 1500 rpm ▶️ Weight approx. 860kg ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ Electric starter ➡️ CE certificate ➡️ 8 sockets 220V 16A ➡️ 1 socket 400V 16A ▶️ 1 socket 400V 32A ➡️ 1 socket 400V 63A ➡️ Fully EU-compliant (including 220V as in Germany) ➡️ With AVR regulation ➡️ With battery charger ➡️ With ATS Net price: €6,900.00 Generator 50 kVA / 40 kW: ➡️ Proven engine ➡️ Proven 4-cylinder diesel engine ➡️ Very quiet, only approx. 65 dB ➡️ 380/400V, 220/230V, 50Hz ➡️ Dimensions approx. 2250 x 960 x 1270 mm ▶️ Weight approx. 860kg ➡️ Surge protection ▶️ Socket distribution box IP44 ➡️ Electric starter ➡️ CE certificate ➡️ With ATS ➡️ AVR regulation ➡️ With battery charger Tjdpfxop E Egae Acnob Net price: €6,900.00 Generator 25 kVA / 20 kW: ➡️ 25 kVA / 20 kW ➡️ Proven engine ➡️ Very quiet, only approx. 65 dB ➡️ 3-phase, 380/400V, 220/230V, 50 Hz ➡️ Dimensions approx. 1800 x 900 x 1000 mm ▶️ Weight approx. 650kg ➡️ Electric starter ➡️ CE certificate ➡️ With ATS ➡️ AVR regulation Net price: €5,900.00 All prices are net plus 19% VAT. The images may show optional accessories at extra cost. Images may vary! Subject to error. * Please ask for our warranty conditions.