Used Bianshi Yvf2 100L1-4 for sale (58,528)

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Screw compressor ZR 4-52 with drum dryer Nlodpfx Aevyrlaof Ssg Characteristics: Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 50307

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, Please provide us with your offer price. A total of 6 Emag machines are available (same type). Sales are only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). Nedpfxsyh Sc Ns Af Solg ===== Technical data can be found in the attached handout. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Nlsdpfx Aoy Tacrof Sjg Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 7,896 h, load capacity: 4,800 kg, lifting height: 4,670 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, battery capacity: 805 Ah, battery voltage: 80 V, fork length: 1,600 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 250-15, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 7,090 kg, total height: 2,400 mm, total length: 2,930 mm, total width: 1,500 mm, fuel: electricity, Equipment: cabin, sideshift, LINDE E 48 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 4.800 kg Lifting height: 4.670 mm Closed height: 2.400 mm Free lift: 1.620 mm Mast: Triplex (3F467) Fork length: 1.600 mm Fork carriage: 3 Drive: Elektro 80V Battery: 80 V / 805 ah. Charger: Dreiphasig 80 V Tyres: Superelastik SE 250-15 (70%) / 21x8-9 (50%) Service weight: 7.090 kg Length: 2.930 mm Width: 1.500 mm Year of manufacture: 2007 Njdpfsz Ap Dhex Af Sjlg Operating hours: 7.896 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1309297 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), mileage: 507,489 km, power: 368 kW (500.34 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, parking heater, soot filter, spoiler, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Brake booster - Television - Air suspension - Particle filter - Side skirts - Sun visor - Auxiliary heater = Notes = Volvo FH13.500 6x2 - Livestock 4-deck Finkl + Finkl 4-deck trailer - Water & Ventilation Year of Manufacture: 12-2-2020 & 30-01-2020 Mileage: 507489 VIN: YV2RT40C9KA846744 / W090VA324LBF21609 All from 2020 4 decks Lifting roof Lifting floors Water & Ventilation Euroscan Through-loading system Truck M2: 1st deck: 17.57 2nd deck: 35.14 3rd deck: 52.70 4th deck: 70.27 Nlodpfxjz Eyvdj Af Sjg Trailer M2: 1st deck: 18.18 2nd deck: 36.36 3rd deck: 54.53 4th deck: 72.71 Total: 142.98 Euro 6 I-Shift transmission Camera system TV Refrigerator Microwave Etc. = Further Information = Technical Information Number of cylinders: 6 Transmission Gearbox: I-Shift, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Max. axle load: 8000 kg; Steered Rear axle 1: Dual tires; Max. axle load: 11500 kg Rear axle 2: Max. axle load: 7500 kg Weights Unladen weight: 14,540 kg Payload: 12,460 kg GVWR: 27,000 kg Maintenance, History and Condition APK (Technical Inspection): Valid until 03/2027 Technical condition: good Optical condition: good

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Nlodpey N Tbmefx Af Sjg Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment for waste collection and sorting. Previously used on a binding line in the graphic arts industry to collect paper-cutting waste and dust! The system collects waste via a network of pipes using suction power, separates out the dust, and automatically compacts the waste into containers using a hydraulic compactor. The system consists of the following units: Njdpfxezd Ak Do Af Selg BTR Enviromental, model C48H K11, serial 666838, year 1999 cyklon unit Delta NEU, model AMSP as dustseparator Europress, model ES 4, year 2002 hydraulic container-compacting uniter Europress containers K 27 m³, (599 x 235 x 253 cm) as well as the support racks, structures, and walkways shown in the pictures that are part of the equipment Dismantling, packing and loading on trailer in including in price! Incoterms FOT

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Nljdpfjid Al Nex Af Seg Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: excellent (used), Deckel FP 4 MK Deckel FP 4 MK machining center with Heidenhain TNC 113 control, manufactured in 1990. Fully overhauled by FPS in 2021. Excellent condition, CE compliant!! Nljdozy U E Espfx Af Seg The machine comes from the prototype construction department of Castwerk Technologies. Technical data: Year of manufacture: 1990 Fully overhauled by FPS in 2021 Digital display: 3-axis active digital display HEIDENHAIN TNC 113 Travel in X-axis: 500 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping, DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Tilting table Table clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and equipment: Heidenhain TNC 113 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating instructions for the control and programming examples Handwheels Coolant system About the machine: Offered is a Deckel FP 4 MK machining center with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Deckel on site while it is powered on. You can find more milling machines from well-known manufacturers on our website.

Condition: used, mileage: 475,000 km, power: 265 kW (360.30 HP), first registration: 01/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: semi-automatic, emission class: euro3, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), * Mercedes Benz Actros 2536 sewer cleaning truck * First registration: 01-2007 * Superstructure: Simon Moos FAE 865 * For cleaning grease and oil Nledsz D R R Aopfx Af Sog * Sludge tank: 4,900 liters * Drainage tank: 8,400 liters * Fresh water tank: 700 liters * Return tank: 3,600 liters * Hydraulic tank: 250 liters * Water tank for vacuum pump: 270 liters * Vacuum pump Samson V 15: 900 m³/h * Sludge pump Allweiler AED 1 E 560: 30 m³/h * Polymer pump Allweiler SNP 25.1: 2.4 m³/h * Sprayer Parissoli KL 36: 120 l/min at 100 bar * Heating system Stroco 35.00M: 34 kW * Air conditioning * Steerable rear axle * More pictures and videos available via WhatsApp * Specifications subject to change without notice and prior sale.

Condition: used, Year of construction: 2012, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,628 mm, controller manufacturer: KUKA, Industrial robot from KUKA. Last used in an automation application. The robot can be tested on site. Transport must be arranged by the buyer. Nljdpfxjyg Dlpe Af Sjg

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Nodpszwpfhsfx Af Selg Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Nljdoy Uv Umopfx Af Ssg Part number (engraved): 4-030-15-0531 (4030150531) Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: excellent (used), Year of construction: 2023, Immersion cooler Deltatherm E 4 Nlsdpfx Aex Rrn Isf Seg Suitable for cooling: oil – emulsion – water Temperature range: 10–40 °C Several units available

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle bore: 162 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 4,200 mm, total height: 2,900 mm, total length: 8,200 mm, total width: 3,200 mm, workpiece weight (max.): 2,500 kg, overall weight: 24,000 kg, distance table center to spindle nose: 4,200 mm, CNC Lathe with c-axis GEMINIS - GHT-4 MACH-ID 9802 Make: GEMINIS Type: GHT-4 Control: FAGOR 8065T Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Nodezx Swcopfx Af Sslg Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Power live tools:7.5kW Control: FAGOR 8055 Chip conveyor: Yes Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Njdpswaa Tdjfx Af Solg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed Njdpfx Afew H Dgnj Selg - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, total length: 1,500 mm, total width: 2,500 mm, total height: 2,100 mm, input voltage: 400 V, power: 17.5 kW (23.79 HP), TECHNICAL DETAILS Voltage: 400–460 V Frequency: 50/60 Hz Current consumption: 25 A Power: 17.5 kW Dimensions Height: 2,100 mm Width: 2,500 mm Depth: 1,500 mm Nodjzzp Hgspfx Af Sslg FEATURES Robust stainless steel construction Intuitive control Integration into existing production lines possible Technical documentation Electrical wiring diagram

Condition: used, Year of construction: 1991, Format: 760 x 440 mm Equipment: Spindles: 4 Drilling diameter: 3 ??? 10 mm Drilling depth: up to approx. 70 mm Nsdpfx Afjy Iz R Hs Sslg Spindle spacing: adjustable Spindle shaft: ?? 11 mm Hole spacing: min. approx. 3 mm / max. approx. 800 mm Table size: approx. 760 x 440 mm Connection: 380 V Power: approx. 1.5 kW Weight: approx. 90 kg

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm Nlodpezycpxefx Af Seg thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Nsdpsyf Az Tsfx Af Sjlg

Condition: excellent (used), Year of construction: 2004, Mion Mosole vacuum extraction unit, used. Nlsdpfxozx Tf Io Af Sjg

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HAAS, This 3-axis HAAS VF-4 was manufactured in 2011. It features a generous X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a 40-tool automatic tool changer and includes a probe and toolsetter for enhanced precision. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. Nlsdpfjzxp D Hsx Af Sog

Condition: excellent (used), Year of construction: 2019, Panel saw SCHELLING FH4 with turning device and panel storage system. Njdpfxezfavye Af Sslg

Condition: like new (used), DEMONSTRATION MACHINE ELMAG band saw including 2 bi-metal saw blades & 5 liters of coolant Like-new DEMONSTRATION MACHINE with minimal operating time! For sale is a high-quality band saw in very well-maintained, like-new condition. Nedpszzzitefx Af Solg Included in the scope of delivery: 1x Bi-metal saw blade – NEW 1x Bi-metal saw blade – already installed 1x ELMAG coolant concentrate, 5 liters Machine as a DEMONSTRATION MACHINE with minimal operating time Ideal for workshops, metal construction, locksmiths, assembly companies, and demanding DIY enthusiasts. Technical data: Cutting range for round tubes at 0°: max. 180 mm Cutting range for round tubes at 45° right-hand miter: max. 110 mm Cutting range for square tubes at 0°: max. 180 mm Cutting range for square tubes at 45° right-hand miter: max. 110 mm Cutting range for rectangular tubes at 0°: max. 305 × 180 mm Cutting range for rectangular tubes at 45° right-hand miter: max. 180 × 110 mm Saw blade length: 2,360 mm Saw blade height: 20 mm Saw blade thickness: 0.9 mm Cutting angle: 0–45° Speed stages: 4 Cutting speed: 18 / 28 / 37 / 54 m/min Saw blade drive: 750 W Coolant pump: 100 W Mains connection: 400 V / 50–60 Hz Sound pressure level steel: 71 / 73 dB(A) Infeed height: 530 mm Dimensions (L × W × H): 1,250 × 430 × 1,000 mm Weight: approx. 130 kg The machine is located in A-5431 Kuchl and can be inspected and assessed at any time during our opening hours. Subject to prior sale! Related terms / search terms: Band saw, metal band saw, metal band saw machine, band saw metal, sawing machine, metalworking, miter band saw, miter saw, band saw 400 V, industrial band saw, workshop machine, metal construction, steel band saw, sawing machine, metal band saw 2300 mm, ELMAG, ELMAG band saw, bi-metal saw blade, coolant, workshop equipment, locksmith, mechanical engineering Reference: R-A0117