Used Aurotek Router - Pcb Separator for sale (7,077)

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Godozz Agmepfx Ak Uobt Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Gbodsxt Dqqjpfx Ak Uot

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. Gbedpfjzw Hnyjx Ak Ust The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. The Cartesian robot and other components of the cell can be purchased separately.

Condition: used, Bernardo Type T 1000S swivel-spindle router for versatile routing work on solid timber, sheet materials and profiles. The machine is ideal for joinery and carpentry workshops requiring precise and high-performance milling solutions. Featuring a swivelling spindle, sliding carriage, angle stop and pneumatic hold-down device. Technical data: - Milling spindle diameter: 30 mm - Speed ranges: 1400 / 3500 / 6000 / 800 rpm - Clamping length: 125 mm Godpezryqkefx Ak Ujbt - Motor power: 4.0 kW

Condition: refurbished (used), Year of construction: 1995, Dust separator, dry sand screening unit. Throughput capacity: 160 tons/hour. Motor: 50 kW to 150 kW, depending on requirements. Current motor: 75 kW. New bearings. Interior lining with wear-resistant sheet metal. Disassembled and ready for transport. Gjdpfx Akjim D S So Ujbt Equipped with a suction system and a hot air drying system.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng KYDB204 disc stack centrifuge / 3-phase separator. Manufacturer: Juneng Machinery Model: KYDB204 Type: disc stack centrifuge / centrifugal separator Separation: liquid-liquid-solid / 3-phase separation Drum diameter :242(mm) Rotary speed: 8086(r/min) Motor model and power: Y112M-4-B5 4KW Capacity: 0.5-2m3/h(depend on material condition ) Power: 4(KW) Dimension（L*W*H） 830*610*1150(mm) Weight: 580(kg) Degree of automation :Automatic cleaning and slag discharging Dimension: 810*968*1139mm(L*W*H) Material: stainless steel, according to manufacturer specification Condition: new / unused Application: oil-water-solid separation, liquid clarification, fine separation Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Europe can be arranged The Juneng KYDB204 is a compact industrial disc stack separator designed for continuous liquid-liquid-solid separation. It is suitable for applications where oil, water and fine solid particles need to be separated in a closed centrifugal system. Gedpfx Aozlby Hok Uebt Typical applications: edible oil clarification vegetable oil / crude oil polishing oil-water separation fuel / lubricant treatment fine chemical liquid separation food and beverage liquid clarification industrial process liquid separation Main advantages: compact disc stack centrifuge design continuous operation closed inlet and outlet system high-speed centrifugal separation fine separation of liquid phases and solids stainless steel execution according to manufacturer specification suitable for integration into existing process lines The machine is offered as new equipment through an EU seller. Delivery, documentation and final technical confirmation can be arranged before order. Technical details to be confirmed according to final product application. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng KYDB204 Tellerzentrifuge / 3-Phasen-Separator. Neue Juneng KYDB204 Disc-Stack-Zentrifuge zur kontinuierlichen Flüssig-Flüssig-Feststoff-Trennung. Geeignet für Öl-Wasser-Feststoff-Trennung, Pflanzenölklärung, Prozessflüssigkeiten, Lebensmittel-, Chemie- und Industrieanwendungen. Kapazität: ca. 2.000 l/h, abhängig vom Produkt und Prozess Motorleistung: ca. 4 kW Ausführung: Edelstahl gemäß Herstellerspezifikation Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung nach Europa kann organisiert werden Technische Details und Eignung bitte je nach Anwendung final bestätigen.

Condition: used, A Bäuerle SFM-type rigid table router or rigid router for profiling and routing timber. Technical data: - Spindle diameter: 30 - Direction of rotation: Left and right Gbedpfx Akszryrbs Uot - Motor: 3 kW

Condition: used, machine/vehicle number: 008690, X axis working area: 3100 mm Y axis working area: 1410 mm Godpfx Ajzwdkfjk Ujbt Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 18

Condition: ready for operation (used), Year of construction: 2011, operating hours: 51,000 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 700 mm, controller model: FANUC 16i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 650 mm Travel range Z-axis: 700 mm Spindle speed: 12,000 rpm Tool interface: HSK A63 Number of tool magazine positions: 295 Rotary table: stepless, 360,000 indexing positions Rotary table speed: 65 rpm Pallet system: 7-position multi-pallet system Pallet size: 500 x 500 mm Maximum pallet load: 550 kg Maximum workpiece diameter: 800 mm MACHINE DETAILS CNC control: FANUC 16i Coolant tank: 750 l Coolant filtration system: self-cleaning Loading/unloading stations: 1 Operating hours: 51,000 h EQUIPMENT Cooling unit for temperature control of the spindle unit Spindle prepared for coolant supply through the tool flange Climate-controlled control cabinet with air conditioning unit Full enclosure of the work and machine area Work area lighting Scraper-type chip conveyor with rear discharge Conveyor screws for chip removal Closed upper machine cover, prepared for connection to a central extraction system C301 Workpiece cleaning C303 Tool taper cleaning C410 Tool Monitor MCM C305 Oil separator C333 Automatic coolant refill C308 High-pressure coolant system, 65 bar C403 Tool presence monitoring via laser Gbedpfezxztasx Ak Uet C412 Balluff read/write system with JTERM-01 C408 Marposs wireless measuring probe MIDA T36 jFMX MCM monitoring system including Network Part Program

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0803078, spindle diameter: 40 mm, type of input current: three-phase, number of spindles: 4, For sale: Leadermac Linnerman 423c with four 40mm spindles, featuring a feed system controlled by a potentiometer. The maximum feed speed is 30 meters per minute. The control panel is mounted separately on a trolley. The equipment is disconnected from the power supply. Spindles: 4 shafts, diameter 40 mm. Feeding system: Variable feed speed controlled via a potentiometer. Gsdpfxszvalpo Ak Uobt Feed speed: Adjustable up to 30 m/min. Control panel: Separate control unit mounted on a mobile trolley.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Godszx Ergjpfx Ak Usbt Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Gbjdezz Rpcopfx Ak Ust - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 220 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 220 mm, total width: 1,350 mm, total height: 1,400 mm, total length: 3,120 mm, spindle speed (min.): 5,000 rpm, extraction nozzle diameter: 120 mm, Available: CASADEI C4 four-sided planer – 4 heads, 220 mm The machine is used, has undergone a technical inspection, is in full working order, and is ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is the vertical adjustment of the side spindles, allowing the use of profiling heads, similar to those in a spindle molder. This makes the CASADEI C4 planer suitable not only for standard four-sided planing of wood but also for the production of formwork, paneling, moldings, and other profiled elements. Specifications: • Manufacturer: CASADEI • Model: C4 • Machine type: Four-sided planer for wood • Year of manufacture: 1992 • Working width: 220 mm • Working height: 120 mm • Number of spindles: 4 • Spindle motor power: 4 × 3.0 kW — separate motor for each head • Total power: 17.5 kW • Electric height adjustment for planing • Manual width adjustment for planing • Vertical spindle adjustment (up/down) • Machine equipped with a complete set of heads and a cutterhead • Diameter of vertical heads: 120 mm • Height of vertical heads: 50 mm • Diameter of horizontal heads: 145 mm • Width of horizontal heads: 220 mm • Spindle diameter: 40 mm • Infeed gear before the first head • Infeed table with a width of 22 cm • 2 feed speeds: 6 and 12 m/min • Lubrication pump for the table • Soundproof cabin • Original paint • Dust extraction ports: Ø 120 mm • Weight: 1210 kg • Overall dimensions: 312 × 135 × 140 cm (L × W × H) Additional information: • Machine preserved in its original condition, after technical inspection and preparation for operation • Photos show the actual condition of the machine offered • Free training on machine operation at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using MDD fleet, courier companies, or external carriers Gedszmhg Nspfx Ak Uobt • We assist in obtaining leasing or loan financing • Delivery costs depend on the destination and the method of machine transport

Condition: ready for operation (used), We offer a ready for use hamos EKS 1031 electrostatic separator for plastics. This machine is designed for efficient separation of mixed plastic materials using electrostatic technology. Ideal for recycling and industrial processing applications. Condition: ready for use Gedpeyv Hzasfx Ak Usbt Voltage: 400 V Frequency: 50 Hz Type: EKS 1031-0 The machine is in good working condition. Inspection possible. Location: Lithuania For more information, please contact us.

Condition: good (used), Year of construction: 2015, functionality: fully functional, overall weight: 210 kg, Industrial robot, type Kuka KR 210R2700 Quantec + linear axis Technical specifications: Maximum reach 2696 mm Rated payload 210 kg Maximum payload 275 kg Gbedpfozv Ttyex Ak Uot Positional repeatability (ISO 9283) ± 0.05 mm Number of axes 6 Mounting area 754 mm x 754 mm Weight approx. 1 ton. Linear axis, approx. 7500 mm and 6000 mm travel range Base platform 1100 mm x 1100 mm x 25 mm !!Also available for sale separately!!

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 13,067 h, functionality: not functional, Equipment: documentation/manual, Control system issues (under Programs) Electrical fault (control boards) Suitable for spare parts Tool changer – chain conveyor included Gbodpsznvm Hsfx Ak Ust Without tools Already disassembled and stored separately!

Condition: refurbished (used), functionality: fully functional, SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Technical specifications: Manufacturer: Sepamatic Model: SEPA 2000T Mesh size: 5 mm Power: 11 kW Power supply: 400V, 50Hz Power consumption: 22A Control voltage: 24V Electrical diagram: No. 0695030 B Made in Germany Dimensions: Length: 165 cm Width: 150 cm Height: 200 cm Application: The SEPA 2000T separator is ideal for processing poultry, pork, and beef. Thanks to its 5 mm mesh, it allows for high-quality separation of raw materials while maintaining high efficiency. Why choose the SEPA 2000T? Gjdpfx Asw Dcrkek Uobt Robust construction High separation efficiency Easy operation and maintenance Compact dimensions ideal for production lines

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Gsdpfx Aoppyhtek Uebt Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: excellent (used), In almost new condition 3mm drum for a Baader 604 separator Gjdpfx Akexd Swto Ujbt

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Gjdpfezzwg Ujx Ak Uebt Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Year of construction: 2003, condition: reconditioned (used), Machine inspected. Disassembled and ready for container transport (2). Wear-resistant liners. Godpfx Akjizkxwj Uobt New bearings. Throughput capacity of 160 tons per hour. 50 kW to 150 kW motor, depending on requirements. Current installed motor: 75 kW.

Condition: good (used), Year of construction: 2007, functionality: fully functional, working width: 1,400 mm, roller diameter: 240 mm, passage height: 80 mm, height adjustment type: electric, working height: 870 mm, roll width: 1,500 mm, workpiece height (max.): 80 mm, Bürkle DAK 1400 adhesive application machine, from the first owner, in well-maintained condition: – Machine for single- and double-sided adhesive application – Adhesive application on the top and bottom (4-roller machine) – Robust industrial design Gedpezuv Dfsfx Ak Uebt – Direct drive of the application rollers – Separate direct drive of the metering rollers – Metering gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable via sliding coupling – Infeed with 3 driven rollers for part length min. 350 mm – Outfeed with 3 driven blade disks for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push buttons – Working width max. 1400 mm – Clearance height up to 80 mm – Working height above floor approx. 870 mm – 2 application rollers Ø 240 mm – Grooving 20 pitches per inch – 2 metering rollers Ø 190 mm – Roller width 1516 mm – Drive power 3 kW – Operating side Right – Paint finish RAL 7035 light gray – Year of manufacture 2007, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Inspection and trial operation possible by arrangement

Condition: used, Year of construction: 1992, Made in Germany Electrostatic filter Suction capacity: max 2200 m³/h Weight: 150 kg Operating voltage: 400 VAC, 50 Hz, Current consumption: 3.2 A Gsdpfx Aksv D Drms Uobt

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-20-8714, functionality: fully functional, Equipment: CE marking, documentation/manual, KDF 860 Edition, serial no. 0-261-20-8714, year 2016 Feed speed 8–20 m/min, rounding 20 m/min, workpiece width 70 mm, (8–22), minimum workpiece length 140 mm, CONFIGURATION: - Pre-milling - Spray separator - EVA adhesive application with QUICKMELT top preheating, Second glue pot A12 EVA (white glue) - Infrared workpiece heating - Side pressure (4 rollers; The first pneumatical) - Trimming with SOFTTOUCH function (smooth unit start-up); straight/angle trimming, exact/with overlap - Multifunctional multi-profile milling unit (R1 + R2 + chamfer); servo-adjustment - 2-motor SERVOTRIM rounding unit—controlled by linear motors on both axes, feed rate up to 20 m/min, soft-touch function for gentle contact of the unit with the workpiece, 4x servo-adjustment - Profile scraper unit – 4x servo-adjustment, dual-profile (R1 + R2) profiling guides with 0.01 mm step - Flat scraper unit, - Spray cleaner - Brushes, Gsdpfszuxh Hsx Ak Ujbt - Motorized beam lift, - Motorized infeed fence, - Full automation, - POWERTOUCH control system, - moveable workpiece support, - loading guide for narrow parts - upper belt pressure

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Gsdpjryxmxjfx Ak Uebt Good working condition. Please check out our other listings as well.