Used Arno Kesel Hydraulic Vise for sale (16,144)

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW Nljdpfx Ajtv Ihqed Sjc weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: new, Year of construction: 2024, feed under pressure 2,7 mm/sec pressure 100 t stroke 400 mm table surface area 920 x 560 mm feed down 4,25 mm/sec feed up 8,22 mm/sec oil pressure max. in the work cylinder 385 bar oil volume 26 l diameter of piston 125 mm column daylight 920 mm voltage 400 V/ 50 Hz total power requirement 4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m Nlsdpjvcrm Asfx Ad Ssc • unused workshop press, (Demonstration machine) • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjusted in height, • Cylinder Ø 175 mm, piston base Ø 125 mm.

Condition: excellent (used), Year of construction: 2013, Technical specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment Adjustable parallel stop NC control: Maper by BAYKAL Cuts per minute: 12 min. Sheet metal support device Side protection grilles Nodpfx Aezfx Nfed Sslc Motor power: 22 kW Dimensions (length x width x height): approx. 4000 x 3000 (1800) x 2000 mm Weight: approx. 9.7 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Nedozdax Hepfx Ad Sslc Laser cutting indicator Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings Nlodpfozfvvvjx Ad Sjc CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Nlodpfx Adezc Rxho Ssc Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t Nodpotxdmwsfx Ad Sjlc throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station *

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Bosch, hydraulic pump Nedpfxevviize Ad Selc -Type: Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 1x pumps available -Price: per piece -Dimensions: 130/90/H120 mm -Weight: 3.4 kg/pc.

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Nlodpewxw Amsfx Ad Sjc Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used vise Manufacturer: Hilma Model: KNC 160 Njdpow Skgdefx Ad Solc For horizontal clamping Clamping against fixed jaw Mechanically operated With mechanical-hydraulic force transmission With fully encapsulated spindle Jaw width: 160 mm Max. clamping force: 50 kN Max. clamping range: 436 mm Overall length: 594 mm Overall height: 115 mm

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 Nlodpfx Adsul U Svo Sec serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: Nledpswxw H Ejfx Ad Soc 1952 Pressing force: 500 t Clear gap: 450 mm Location: In Germany

Condition: good (used), 1 used high-pressure machine vise Manufacturer: Allmatic Type: 160 Technical specifications: Jaw width: 160 mm Nledpfx Asw Sdxgsd Sjc Clamping range I: 0 mm – 152 mm Clamping range II: 147 mm – 302 mm Clamping force: 60 kN Weight: 60 kg Base body height: 137 mm Jaw height: 50 mm Support height: −0.0585 mm L4: 613 mm – 915 mm 2 units available

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, SHEARING MACHINE BL 3000 X 3/4 X 200 Nodpfxszfptbs Ad Sslc HYDRAULIC MOTORIZED BACK GAUGE USED MACHINE, IN WORKING ORDER

Condition: used, Year of construction: 2002, sheet thickness: 8sheet length: 2000prebending: 6Upper Roll Diameter: 205Side Roll: 185messurements (LxWxH): 3850 x 1550 x 1420Standard Accessories Steel construction The adjustment of the rolls is made by hydraulic cylinders The rotation of the rolls is driven by individual hydraulic motors and planetary gears Pressure limit valves protect the machine against overloading Pre-bending can be adjusted according to the operator’s selection and increases productivity Electrical control panel Nljdey Hymwjpfx Ad Soc Portable control panel Conical bending system 2 pcs. digital readout for movement of both side rolls

Condition: reconditioned (used), functionality: fully functional, actuation type: hydraulic, Equipment: type plate available, We offer this Tagliabue guillotine-type hydraulic shear, which has been refurbished, manufactured in [constructionYear]. Njdpfjzfipvsx Ad Sjlc If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2009, Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Nodpfjy N Tl Eex Ad Sslc Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, OMAG Hydraulic Shear 3000 x 10, motorized back gauge, throat depth 200 mm, dimensions: 345 x 210 x 215 (h) cm, weight: 10,000 kg Nsdpfx Aowvqkrod Sjlc OMAG Hydraulic Shear 3000 x 4, motorized back gauge, throat depth 200 mm, dimensions: 340 x 135 x 150 (h) cm, weight: 4,000 kg

Condition: good (used), Year of construction: 1994, Offer 20149 Technical specifications: - Load capacity 1000 kg - Tilting angle up to max. 90° - Foot pump Nsdpfxeygvr Us Ad Solc - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

Condition: used, Year of construction: 1994, Offer 20146 Technical data: - Load capacity 1000 kg Nlodpfx Asygvwwsd Ssc - Tilting angle up to max. 90° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

Condition: good (used), Year of construction: 2015, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good / well-maintained condition (!!) Current list price approx. 80.000 euros Features: - Electro-hydraulic / slide-guided guillotine shear - HACO CNC control model "SC 90" * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch Njdezczgcspfx Ad Selc - Rear safety guard (no light barrier) - Operating instructions in German (PDF)

Condition: used, We are offering this used high-pressure machine vise for sale; the year of manufacture is unknown. Nsdezfhaaepfx Ad Solc If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: Nsdpfx Aszfg Sued Sslc If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, We are offering this used GESIPA FireFox 2, pneumatically and hydraulically powered, with an unknown year of manufacture. Nodpfx Adszfg Ngs Solc Manufacturer: GESIPA Model: FireFox 2 Drive type: pneumatically and hydraulically powered If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Shelf length – 120 cm Shelf width – 45 cm Nlsdpfezfgptox Ad Soc 3 hydraulic cylinders, each with a diameter of 140 mm Ground clearance – 38 cm Pump motor power – 3 kW Electric heating – 2 x 9 kW Overall length – 180 cm Overall width – 80 cm Height – 215 cm Weight – 2600 kg