Used Alfa Laval Rv4 1762570-80 Dn25 for sale (18,235)

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Dkedpfxoxzr Ruo Al Aju Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: used, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 4,500 mm, fork length: 1,800 mm, total length: 5,360 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 Dkodpfx Aozlk R Iol Asu - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Stroke 260 mm Dksdoz A Ia Sopfx Al Asu with Cybelec DNC 94 PS with back gauge Weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: used, functionality: fully functional, machine/vehicle number: 512044006074, Year of construction: 2004, operating hours: 9,813 h, load capacity: 2,000 kg, lifting height: 4,335 mm, free lift: 1,515 mm, fuel type: electric, mast type: triplex, construction height: 2,000 mm, empty load weight: 3,711 kg, total length: 2,120 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Chassis number: 512044006074 Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Djdpfxezwyfre Al Asku Description: German: Still R20-20 No.: R0817 Year of manufacture: 2004 Operating hours: not specified Lifting capacity: 2,000 kg Lifting height: 4,335 mm Overall height: 2,000 mm Free lift: 1,515 mm Mast: Triplex Battery: 48 V Battery: A refurbished battery with at least 80% remaining capacity will be installed upon purchase. As the battery will only be installed at the time of sale, no photo of the battery that will ultimately be supplied is currently available. Equipment: Side shift, fork positioner, 3rd and 4th valve, StVZO road equipment, front and rear work lights, rotating beacon and rear-view mirror. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Still R20-20 No.: R0817 Year of manufacture: 2004 Operating hours: not specified Lifting capacity: 2,000 kg Lifting height: 4,335 mm Overall height: 2,000 mm Free lift: 1,515 mm Mast: Triplex Battery: 48 V Battery: A refurbished battery with at least 80% remaining capacity will be installed upon purchase. As the battery will only be installed at the time of sale, no photo of the battery that will ultimately be supplied is currently available. Equipment: Side shift, fork positioner, third and fourth hydraulic valve, StVZO road equipment, front and rear work lights, rotating beacon and rear-view mirror. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, StVZO, interior mirror, rotating beacon, 3-wheel.

Condition: used, functionality: fully functional, machine/vehicle number: 516029002148, Year of construction: 1999, operating hours: 6,424 h, load capacity: 5,000 kg, lifting height: 4,200 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, empty load weight: 6,828 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516029002148 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire condition: 40 - 60% Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Djdpfxjz Dcm As Al Aeku Description: German Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 4200 mm Mast: Triplex Free lift: 1,580 mm Version: Container-capable Battery: 80 V / 930 Ah, year 2019, manufacturer SBS Battery condition: 80–100 % Equipment: Side shifter, 3rd and 4th hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 2,800 mm Mast: Duplex Free lift: 1,580 mm Version: Container suitable Battery: 80 V / 930 Ah, year 2019, manufactured by SBS Battery condition: 80–100% Equipment: Side shift, third and fourth hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shifter, 3rd valve, 4th valve, rear work light, front work light, load backrest.

Condition: used, Year of construction: 2021, operating hours: 15,230 h, lifting height: 7,000 mm, fuel type: gas, mast type: duplex, total height: 4,100 mm, total length: 3,450 mm, total width: 2,230 mm, color: red, Empty weight: 13.050 kg Lifting capacity: 8.000 kg - Year: 2021 Dsdpfxszwux To Al Ajku - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: H2X396Y00749 - Operating hours: 15230 - Lifting capacity: 8000kg - Lifting height: 7000mm - Overhead clearance: 4220mm - Free lift: 0mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: License Plate, Heating, Joystick, Full cabin, Work lights - Mast: Duplex - Inspection valid until: 09-2026 - Drive: LPG - Motor brand: Linde - Transport dimensions: 3450mm x 2232mm x 4100mm (l x w x h) - Transport weight [kg]: 13050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain 530, controller model: Heidenhain ITNC 530, rotational speed (min.): 8,000 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 20 bar, number of spindles: 1, input voltage: 29 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C80, used, fully operational. The machine has always been maintained by Hedelius over the years to keep it up to standard. (New spindle, new guides, etc. – invoices and documentation available) Spindle hours: 14,000 h 3-axis machining Coolant filtration system Pendulum operation, mountable partition available Heidenhain 530 Djdpfxoy Rmv Hs Al Asku ICS 20 bar (internal cooling) Handwheel Measuring probe SK 40 Tool changer Total weight: 15 t, Transport dimensions approx. 6500x3000x3000 mm

Condition: used, Used Mario Riboldi Press Brake Model: HL 150/80 Description: • Mario Riboldi hydraulic press brake, ideal for medium to heavy metal fabrication work. Technical Data: Dksdpfx Asx Sxymsl Aeu • Bending force: 150 tons • Useful working length: 8,050 mm

Condition: new, Year of construction: 2026, machine/vehicle number: ST-80, functionality: fully functional, pressing force: 80 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 5 mm/s, table width: 1,000 mm, table length: 1,750 mm, table height: 800 mm, total length: 2,000 mm, total width: 1,750 mm, total height: 1,750 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Model: ST-80 STANDARD DESCRIPTION: We have designed the ST series of motorized hydraulic presses with a movable gantry and adjustable ram, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures, as well as plates cut by oxy-fuel or laser. The design facilitates easy loading and unloading of large volumes: parts, plates, or structures. It provides access to various pressure points without having to reposition the workpiece, thanks to the lateral movement of the cylinder and the longitudinal travel of the gantry. STRUCTURE AND TABLES: The ST series hydraulic presses feature an electro-welded frame manufactured exclusively from S355JR steel. The frame is stress-relieved and precision-machined after welding to ensure perfect parallelism and accuracy. All structural calculations and design are performed using finite element software. As a result, we always guarantee our high standards of precision and quality. The gantry provides longitudinal movement. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with honed barrel, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder operation via a lever hydraulic valve. Equipped with a removable pressure pad to protect the piston. Motorized hydraulic unit with two speeds and automatic switch-off of the fast approach speed at working pressure, including a pressure relief valve. ELECTRICAL SYSTEM AND SAFETY: Electrical circuit includes a motor protection switch with emergency stop. Supplied with a glycerin-filled pressure gauge (reading in tons) and hydraulic oil. Complies with all essential health and safety requirements according to CE standards. Delivered with an operating manual. MODEL ST-80 Capacity (t) 80 Motor Power (kW) 3 Working Speed (mm/s) 3.8 Approach Speed (mm/s) -- Return Speed (mm/s) 4.7 Max. Pressure (bar) 315 Piston Stroke – J (mm) 450 Lower Table (mm) 1,000 x 1,750 Ram Travel – C (mm) 730 Gantry Travel – D (mm) 1,100 Front Opening – A (mm) 1,050 Dsdpfx Aez E Hb Hjl Ajku Vertical Opening – B (mm) 500 Working Height – E (mm) 800 Overall Width – G (mm) 2,000 Overall Depth – H (mm) 1,750 Overall Height – I (mm) 2,250 Weight (kg) 1,700

Condition: used, Year of construction: 1995, Ring & profile bending machine Type: Alpha 50 H2 Shaft diameter 50 mm Shaft length 115 mm Standard roller diameter 175 mm Dsdpfxewmdp Ns Al Ajku Speed ​​8 rpm 3 rollers driven Weight 650 kg Hydraulic roller adjustment Including various roller sets Price excluding VAT

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 34/1998, type of input current: three-phase, input voltage: 380 V, total length: 21,300 mm, air demand: 34 m³/h, Complete used packaging and palletizing line, perfectly integrated and operational, ideal for granular, powdery, and similar products (soil, fertilizers, peat, nutshells, and bulk materials for agricultural and industrial use). Dsdpez E Dagjfx Al Aoku The system includes all process stages: 16 m³ peat hopper with clod-breaking devices, 0.8 x 13 m conveyor belt, Loro & Parisini hammer mill model M66 (30 kW), 10 m³ feed hopper, 0.8 x 14 m feed belt for the bagging machine, ESSEGI bagging machine model CTS 80 (serial no. CTS 80 34/98, year 1998, 11 kVA) with forming tubes for 10-20-45-70 liter bags, ESSEGI bag compactor, TMG palletizer model SIRIO 1S80 (serial no. 2.500.12.98, year 1999, 14 kVA), ROBOPAC wrapping machine model AVR 201/ATS with rotating arm, pre-stretch, and top anti-drip function, rotating pallet discharge platform with roller conveyor, dust extraction system, electrical systems, and compressed air system (compressor excluded). The system is already operational, previously purchased and used by the company for producing bags ranging from 10 to 70 liters, and is in good overall condition. Estimated capacity is 350–500 bags/hour, depending on the product and format. Photos, layout drawing, and further technical documentation are available upon request. Price negotiable. The entire system is being sold as a complete unit.

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Dodpjz Hqwbefx Al Aeku Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 18,548 h, load capacity: 8,000 kg, lifting height: 5,250 mm, fuel type: diesel, mast type: simplex, construction height: 3,980 mm, fork carriage width: 2,180 mm, empty load weight: 14,105 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,250 mm, Diesel forklift Load center: 900 ISO class: FEM 4 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 4 x 8.25R15 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 2 x 300R15 Rear tire condition: 40 - 60% Battery year of manufacture: 2017 Dodpfx Aez Hnv Iel Aeku Dual auxiliary hydraulics, air conditioning, heater, cabin, blue spot light, dust protection, 4x front work lights, 1x rear work light.

Condition: excellent (used), Weiss TS 130 Thermal Shock Chamber Manufacturer: Weiss Umwelttechnik GmbH Model: TS 130 Machine type: Thermal Shock Chamber Test chamber volume: approx. 130 liters For sale is a used Weiss TS 130 thermal shock chamber with a hot and cold chamber, a movable lift basket, SIMCON/32 touch control, and a separate air-cooled condenser/cooling unit. The system is suitable for temperature cycling and thermal shock testing, environmental simulation, material and component testing, electronics testing, quality assurance, as well as research and development. Technical data: Hot chamber: +60 °C to +220 °C Cold chamber: -10 °C to -80 °C Switching time hot/cold chamber: approx. 10 seconds Temperature stability: ±1 K Internal dimensions (W × D × H): approx. 500 × 600 × 450 mm Max. load lift basket: 20 kg Max. load per insert rack: 10 kg Refrigeration system: Air-cooled refrigeration cascade Separate condenser/cooling unit as shown in the pictures High-stage refrigerant: R404A / 2.2 kg Low-stage refrigerant: R23 / 1.2 kg Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standby pressure: 11 bar g Electrical data: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14.0 kW Dsdpozp D D Njfx Al Aoku Rated current: 26.0 A Connection type: CEE 32 A Control / Equipment: SIMCON/32 touch control Hot and cold chamber Movable 130-liter lift basket Test chamber door with viewing window Separate air-cooled cooling unit Operating hour counter SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Dimensions / Transport data: External dimensions (W × D × H): approx. 1,820 × 900 × 1,990 mm Width incl. door hinge: approx. 1,850 mm Depth incl. removable door: approx. 1,155 mm Weight of test chamber: approx. 950 kg Separate cooling unit on pallet as shown in the pictures Freight / special transport possible Condition: Used - Year of manufacture 2008 Operating hour counter shows approx. 108.7 hours. Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Weiss TS 130 thermal shock chamber Separate condenser/cooling unit SIMCON/32 touch panel SIMPATI 3.0 software CD Original operating and system documentation Cables and accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Can be inspected while powered on Control system: Heidenhain 426m with internal hard drive If you have any questions or require further information, please do not hesitate to contact us via message or phone. Dkedjz E Dl Njpfx Al Aeu The machine can be disassembled by the buyer. No direct sales to countries outside the EU. We will not handle customs clearance.

Condition: used, functionality: fully functional, Year of construction: 2022, empty load weight: 217 kg, total length: 621 mm, construction height: 625 mm, construction width: 281 mm, Drive battery Condition: Refurbished, no warranty Technical condition: Very good Battery voltage: 24V Battery Ah: 375Ah Battery manufacturer: AIM Djdpfx Alsz E Tape Asku Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: Capacity 80%. Includes collection and disposal of the old battery. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik. We would be happy to provide you with a quote for leasing and financing, as well as delivery at favorable conditions. We also offer trade-in options for Linde equipment, even if you do not purchase a device from us. The indicated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors.

Condition: used, mileage: 866,221 km, power: 294 kW (399.73 HP), first registration: 04/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania R 400 LA4x2MEB, with trailer coupling VIN: 258228 Chassis / Components: * Wheelbase: 3,700 mm * Full air suspension * Tires: Front: 385/55 R.22.5, Rear: 295/60 R.22.5 * Remaining tread depth: Front: approx. 80%, Rear: approx. 80% * 1 diesel tank * 2-circuit air system * ABS * 15-pole connector * Saddle height approx. 98cm Cab: * CR 19 * 2 bunks * Cool box * Air conditioning * Auxiliary heater * CD radio * Cruise control * Stand-alone air conditioning Engine / Transmission: * 12,740 cc // 400 hp / 294 kW // EURO 5 * Retarder * 12-speed manual transmission * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 7,712 kg * Payload: 10,288 kg Other: * German vehicle * 1 previous owner ----New TÜV/inspection and weight adjustments (increase or decrease) are possible upon request. _____ We won't leave you alone, even after the purchase: We will assist you in obtaining export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English, and Russian. All information is subject to change without notice. Subject to changes, errors, printing, and typing errors, as well as prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just the vehicle that counts, but also the service behind it. Fairness, integrity, and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! _____ Our services for you: Vehicle loading We will assist you in loading your purchased vehicles. Special transport We will support you in organizing special transport. Dkjdjz Hgqqspfx Al Aeu Export and short-term registration plates We will assist you in obtaining export or short-term registration plates. Customs formalities We will also support you in customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: used, mileage: 866,221 km, power: 294 kW (399.73 HP), first registration: 04/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania R 400 LA4x2MEB VIN: 258228 Chassis / Components: * Wheelbase: 3,700 mm * Full air suspension * Tires: Front: 385/55 R22.5, Rear: 295/60 R22.5 * Remaining tread depth: Front: approx. 80% // Rear: approx. 80% * 1x diesel tank * 2-line air system * ABS * 15-pin * Fifth wheel height approx. 98cm Cab: * CR 19 * 2 x bunks * Cooler box * Air conditioning * Auxiliary heater * CD radio * Cruise control * Auxiliary air conditioning Engine / Transmission: * 12,740 ccm // 400 hp / 294 kW // EURO 5 * Retarder * 12-speed manual transmission * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 7,712 kg * Payload: 10,288 kg Other: * German vehicle * 1 previous owner ----New MOT/inspection, weight adjustments (reduction or increase) are possible upon request. We don't leave you alone, even after the purchase: We will assist you in obtaining export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to change, errors and omissions, printing and typographical errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it's not just about the vehicle, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That's why we provide you with personal and reliable support – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Dedpez Hgqkefx Al Ajku Special transports We will support you in organizing special transports. Export and short-term registration plates We will assist you in obtaining export or short-term registration plates. Customs formalities We will also assist you with customs matters. Vehicle transport On request, we will arrange for the transport of your vehicle within Germany.

Condition: used, Year of construction: 1992, Altarfalztasche MBO T800 - 68 - 80 Online-Video-Inspection by Skype-Video Dksdpjh Ax Nasfx Al Aju We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dkjdpfx Ash Ax Scsl Aju On Stock Emskirchen / Nürnberg - Can be test

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 21900 € 420.48 € 80 to 285 mm 300x25 mm 750x1425 mm 300 mm 105 mm 10 mm/s Dksdpswiqrcjfx Al Aju 10 mm/s 10 kW 930 mm 1430 mm 750 mm 1450 mm 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61200 € 1156.68 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Dkedpfjwiq I Dox Al Aju Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 25700 € 490.87 € 80 to 500 mm 5 40/14 bzw. 24/24 mm 70 mm 40 1/min 450x15 / 300x20 mm 130x130x13 mm 45 mm 12x52x90 mm 9 kW 2310 mm 1200 mm 2050 mm 2400 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit Djdowirrwspfx Al Aoku punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7700 € 148.61 € 80 to Dodpfjypbqzjx Al Aeku horizontal verschiebbar 250 mm 1040 mm 865 mm 200x120 mm 5 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2019, operating hours: 14,144 h, lifting height: 5,880 mm, fuel type: diesel, mast type: duplex, fork length: 1,500 mm, fork width: 1,750 mm, total height: 4,100 mm, total length: 3,300 mm, total width: 2,230 mm, color: red, Empty weight: 13.050 kg Lifting capacity: 8.000 kg Price: On request - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X396V01548 - Operating hours: 14144 - Lifting capacity: 8000kg - Lifting height: 5878mm - Overhead clearance: 4100mm - Fork length: 1500mm - Maximum fork width: 1750mm - Minimum fork width: 400mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: License Plate, Work lights, Heating, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 3300mm x 2232mm x 4100mm (l x w x h) - Transport weight [kg]: 13050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkjdpozta Huofx Al Aou Koen van Lent