Used Akyapak Cnc Pipe Bending Machine for sale (66,162)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Nwodpow Nadyefx Ad Ssh Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: Working area X: 3,400 mm Working area Y: 1,287 mm Working area Z: 180 mm Number of milling spindles: 1 Main motor: 15 kW Speed max: 24,000 rpm 4th axis Tool clamping system: HSK-F63 Tool changer positions: 18 Vertical drilling spindles: 18 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 2 Nut saw in X direction Design: Cantilever machine Machine table: Console table Number of consoles: 6 Positioning aid: Dot laser Number of vacuum pumps: 1 Capacity of vacuum pumps: 140 m³/h Safety device: Foot mat Control system: BECKHOFF CONTROL Software: HOLZ-HER CAMPUS V6.4 Conformity marking: CE marking Weight: approx. 3,840 kg Njdpfx Aezc Sk Eed Sswh Space requirement length: 6.7 m Space requirement width: 4 m Availability: Short notice, by arrangement.

Condition: new, Year of construction: 2022, Demonstration machine Njdpewt E Tvofx Ad Sowh Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Location: Flörsheim

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Njdpfoxc Rmqex Ad Sjwh Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: Nodpewka Upjfx Ad Sjwh - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. 10000 rpm 500mm x 450mm x 400mm SK 40, 16 tool places Nsdpfszggrdox Ad Sowh SINUMERIK 840 D

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas control unit incl. automatically rotating plasma beveling unit Bevel System 2015/350 Nwodew Rpvbjpfx Ad Ssh Filter system Downflow 3DFP9-SP Power: 9 kW Laser diode 23626ä

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control Nsdpsy Auxmsfx Ad Sswh ä23626

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Njdpfx Aoykruasd Sowh Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track width: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and rail system ä23626

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Nwjdpfsyhd Rbex Ad Seh Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediately ä23626

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC We have our own technicians available for installation, commissioning, and training! All spare parts are in stock. 23626ä Nwodpfxsiff Daj Ad Ssh

Condition: good (used), Year of construction: 2007, CNC gantry plasma cutting machine Manufacturer: Microstep Nodpeuv Hkgjfx Ad Sswh Type: SPL-P 12001.20 Year of manufacture: 2007 CNC control system 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE 23626

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 23626 Nwsdpfx Asw El Udsd Sjh

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Construction: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Extraction Table 1 Oxy-fuel Torch Cutting Thickness up to 150 mm 1 Plasma Marking Unit Kjellberg Laser Pointer Technical Data in Detail: 1x Oxy-fuel Torch (1 x fully automatic) 1x Plasma Marking Unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC Machine Control iMSNC with integrated network card LCD Operator Panels on the Portal Laser Pointer with automatic offset transfer Parameter Database iMSNC Control / Windows® Programming System "AsperWin-Basic" for programming directly on the machine control Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic Height Control via arc voltage USB 2.0 connection for data storage devices Module Remote Diagnostics MicroStep® "iFDS Win" Remote Maintenance Access via TeamViewer Central Gas Control via Proportional Valves Parameter Database for 1 Torch Power Cables Gas Hoses for Preheat Oxygen, Cutting Oxygen Acetylene Machine Cutting Torch RHÖNA-Acetylene FIT+ 1 Piece Capacitive Height Control IHT / for Oxy-fuel 1 Piece Electric Ignition Unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Nedpfxsudn Rzo Ad Sewh Kjellberg® Plasma Marking Unit FineMarker Fully automatic support for FineMarker Kjellberg® Plasma Marking System FineMarker CNC Interface for FineMarker / Connection to the CNC control Module for the automatic control of the marking device 23626

Condition: used, Year of construction: 1995, CNC gantry flame-cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm Nwjdeyay Dhopfx Ad Seh 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without track Without table Without filter 23626

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 S Year of Manufacture: 1995 Operating Hours: 65,071 Control System: HEIDENHAIN TNC 426 Working Area X/Y/Z: 600 x 450 x 500 mm Nwodpev Rxa Sefx Ad Ssh Spindle Speed Range: 20 - 6,300 RPM Tool Holder: SK 40 M & H 3D Probe (for workpiece probing) Vertical-Horizontal Milling Attachment Drilling Spindle Coolant System Rotary Table: 900 x 458 Weight: 4,000 kg Machine Dimensions (L x W x H, approx.): 3,900 x 2,000 x 2,000 mm ä23626

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Manufacturer: HERMLE Type: UWF 902 H Nedsv Rpr Sepfx Ad Sewh Year of Manufacture: 1995 Operating Hours: 46,680 Control System: HEIDENHAIN TNC 426 Travel distances X/Y/Z: 600 x 450 x 500 mm Rotary Table: 900 x 458 mm Renishaw 3D probe Spindle Speed Range: 20 to 6,300 rpm Tool Holder: SK 40 Coolant Tank Drive Power: 8.6 kW Weight approx.: 4,500 kg Machine Dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 23626

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 Nodpfogqkc Nsx Ad Sowh CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel ranges: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Nsdewwt Nmopfx Ad Sswh Tool interface: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons. 23626

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Nedpfx Aewv Tm Ned Sswh Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon measuring probe Chip conveyor Spindle cooler IKZ (internal cooling system) 23626

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Nwedozgci Espfx Ad Soh Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KMM 334-2052, Used CNC Vertical Machining Centres – 3-axis CNC (X/Y/Z) X travel: approx. 800 mm Y travel: approx. 400 mm Z travel: approx. 350 mm Control: Siemens 840D Tool magazine: approx. 42 positions (depending on equipment) Nwodpjyklx Ssfx Ad Sjh Spindle taper: HSK 63 Max. spindle speed: ~10,500 rpm Spindle drive power: approx. 18.5 kW Weight: approx. 7,500 – 8,800 kg Dimensions: ~3.5 × 3.5 × 3 m (L×W×H)

Condition: used, Year of construction: 2005, machine/vehicle number: A0407004, - Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right Njdpfx Aezf N H Ujd Sjwh - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen CNC- Installed colour circles 2 pcs. - Quick-change system for spray guns - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035- Location, in stock - Voltage fluctuations max. +/- 5 % Picture shows an example of a reconditioned automatic machine _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Nwsdpfxozf Hyrs Ad Sjh Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 1999, CNC horizontal machining center DECKEL MAHO DMC 60 H Nsdpfx Adjvn Ra Se Sswh SIEMENS CONTROL Year of manufacture: 1999 Technical data: X-axis: 600mm Y-axis: 560mm Z-axis: 560mm B-axis: 360° Pallet: Number: 2 Size: 400x500mm Permissible load: 600kg Weight: 10,500kg