Used Aeg Sh10G.64 for sale (2,577)

Condition: ready for operation (used), * Brand: Zippe / Aeg * Model: vibrating chute * Dim: length 4500 mm - width 400 mm, * Driving: two pieces vibration motors of each 1,5 kW Pgodpfeywmcyex Amysp * Stock: 1 piece.

Condition: good (used), Year of construction: 2007, functionality: fully functional, filter area: 64 m², suction capacity: 4,500 m³/h, negative pressure: 3,200 Pa, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser , sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand : ESTA Model : DUSTEX F-64 The filter is cleaned by compressed air pulses during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Parameters : Capacity - 4500 m3/h Pgsdovkd Rpepfx Amysp Vacuum - 3200 Pa Filtration area - 64 m2 Cartridge filter cartridges - 4 pieces. 4 Kw motor. Inlet diameter - 280mm Complete with HEPA filter of filtration class H13 The device from the year 2007

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control • Microcomputer control: Professional A Pedpfeyvq Drjx Amysgp • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm • Tool system • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores

Condition: used, Year of construction: 2009, 1st Folding Unit 6 Buckles MBO Vario Control incl. touchscreen Flat pile feeder Working width 53 cm Spiral folding rollers in parallel fold with standard PU roller coating Stainless steel knife shafts, 30 mm Motorized folding rollers + MW adjustment Pgsdsxc If Rjpfx Amyjp VACUSTAR separation head Feeder extension to 100 cm (instead of 84 cm) 2nd Folding Unit Vario Control Working width 53 cm Spiral folding rollers Motorized folding rollers + MW adjustment Sheet monitoring with transfer table Including MBO Delivery A56 The ASP delivery shown in the photos is not included. Included is the A56 delivery as shown in the last photo.

Condition: used, Year of construction: 2004, Technical details: Pgjdpfsuzbaysx Amyep table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/250mm, electrode-table distance range: 420mm-670mm, table dimensions X/Y: 750mm/550mm, max. workpiece weight: 1000kg, workpiece tank internal dimensions X/Y/Z: 900mm/630mm/400mm, workpiece tank volume: 200l, rapid traverse: 1200mm/min, min. input increment: 0.001mm, electrode connection plate: 220mm, max. electrode weight: 75kg. Machine dimensions X/Y/Z: approx. 1850mm/2150mm/2550mm, weight: approx. 4100kg. Including cooling unit, fluid supply unit, automatic fire extinguisher and two power supply units. Documentation available. An on-site inspection is possible. Podpfeyz Anyjx Amyogp

Condition: used, functionality: unexamined, ALPMA Cheese Portioning Machine – Germany Manufacturer: ALPMA (Alpenland Maschinenbau Hain & Co. KG), Germany Year: 1972 Capacity: Approx. 3,000 portions/hour Power: 0.85 kW Weight: 1,000 kg Industrial cheese and butter portioning machine by ALPMA, designed for dividing blocks into uniform portions prior to packaging. Sturdy mechanical construction with low energy consumption and straightforward operation. Supplied complete with multiple cutting tools and format parts for flexible portion sizes and applications. Suitable for semi-hard and hard cheeses as well as butter blocks. Ideal for small and medium-sized dairies, pilot plants, or export markets. Pgodpfx Amex Ivp Rsyjp Condition: Used Availability: In stock Delivery: Worldwide shipping available Key Features: - German-manufactured industrial machine - Approx. 3,000 portions per hour - Very low installed power (0.85 kW) - Reliable mechanical design - Supplied with cutting tools and additional format parts - Easy to maintain and transport Manufacturer: Alpma

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement Pedex D Ntfspfx Amyogp X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Pgsdpfxox D E Hhe Amyep Additional equipment • Paper band filter (coolant filtration) • Probe (needs service; communication error) Technical Specification Taper Size SK 40

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Pgodpfx Asxykwwomysp Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: good (used), Hurco VMX64 / 40T Pgedpfx Amsym R T Hoyop Serial No. M64406503066FHA Year of manufacture: 2006 Spindle hours: approx. 4,200 h Power-on hours: approx. 5,900 h !!! Control upgraded to WINMAX (software version 2016, 09.01.393.53) !!! DXF option and network connection Travel distances: X: 1625 mm Y: 860 mm Z: 760 mm Clamping surface: 1675 x 890 mm Table load capacity: 2,500 kg Power: 15.0 kW Max. torque: 237 Nm Spindle/table distance: 150 - 910 mm Weight: 15,000 kg Dimensions (W x D x H): 6340 x 4400 x 3150 mm Features: - BigPlus spindle with 10,000 rpm - KNOLL band filter system - High-pressure coolant (IKZ) 20 bar - Tool magazine (hydraulic chain magazine), 40 slots - SK40 spindle - Chip conveyor - 6 NC hydraulic vices ATORN (125mm) The machine is in very good condition and ready for immediate use. All backlash has been adjusted, so the geometry is excellent. The control has been upgraded to WINMAX. Price plus loading costs of €1,500 For transport, a truck with 3 m width is required!

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN Pedpfx Amoyug R Royegp flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Podpjyug Hxofx Amyogp The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 1,625 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, spindle speed (max.): 8,000 rpm, Ultimax 4 control unit Travel X/Y/Z: 1625/860/760 mm Pedpfora Idhox Amyjgp Speed 8000 min-1 Tool magazine for 40 tools, SK 40 IKZ Chip conveyor

Year of construction: 2020, condition: used, functionality: fully functional, Wiesheu Bakery oven B8-B5 - 10 Place-5 Place 10 Place 5 Place Mobile base 400 Volt Pgjdsv Rnz Sopfx Amyjp Year of construction from 2019

Year of construction: 2010, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 6,700 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control Windows 10 with a new computer in 2023 Speed continuously adjustable up to 24,000 rpm handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 pneumatically folding material stops and 2 light barrier areas, thus pendulum operation possible A total of 8 material clamps Pgsdpfx Ajwwukxemyjp Spindle in very good condition, spindle pull-in force: 12.5 kN Safety fence dismantled, a demonstration is still possible by arrangement Weight: approx. 3,500 kg

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system Psdpfexpvhasx Amyjgp - HSJ technology (High Speed Jump)

Year of construction: 1999, condition: used, packet weight 900 kg x-travel 200 mm number 3 Stück Pgedsnm H Iropfx Amyep 2x AEG mit Steinen 1x FAG mit Magnet

Condition: not inspected (used), Year of construction: 1999, GRAM Cooling compressor. Maximum working pressure - 25bar. Working temperature, Max - 100grader. Working temperature, Min -10grader. Medium - REFRIG Scope - B. Capacity - 7 Liter SCHORCH electric motor. Type - KN7250M-AB01B-Z. 110kW. Pgjdpfx Ashg Tpasmyep

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 64 S, Wiesheu Bread Oven Euromat – 2X 5 Trays | Year of Manufacture: 2020 | Excellent Condition | Incl. Mobile Base For sale: Wiesheu Euromat bread oven (10 trays) from 2020. Pgodpfsxyyazjx Amyep The oven is in excellent condition and has always been well maintained. Delivered including mobile base, ideal for flexible placement in a bakery, shop, or food truck. Specifications • Brand: Wiesheu • Model: Euromat 10 trays • Year of manufacture: 2020 • Condition: Excellent / minimal signs of use • Including mobile base • Professional quality, reliable and energy-efficient • Perfect for bakeries, hospitality, catering or market use Wiesheu is known for its durable and high-performance ovens. The Euromat series is popular due to its fast heat-up times, even baking results, and user-friendly operation. Prices excl. VAT Viewing possible. #Wiesheu #WiesheuEuromat #BreadOven #BakeryOven #CommercialOven #InstoreBaking #WiesheuOven #BakeryEquipment #ProfessionalOven #MIWE #Wachtel #Bongard #Debag #SvebaDahlen #Salva #CateringEquipment #BakeryOven #BakeryMachines

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 64 L, WIESHEU EUROMAT BAKERY OVEN 10 TRAYS Wiesheu Bakery Oven Euromat – 10 Trays | Year of Manufacture: 2020 | Very Good Condition | Incl. Mobile Base For sale: Wiesheu Euromat bakery oven (10 trays), manufactured in 2020. The oven is in very good condition and has always been well maintained. Supplied with mobile base, ideal for flexible placement in bakeries, shops, or food trucks. Specifications • Brand: Wiesheu • Model: Euromat 10 trays • Year of manufacture: 2020 • Condition: Very good / minimal signs of use • Includes mobile base • Professional quality, reliable and energy-efficient • Perfect for bakers, horeca, catering or market use Wiesheu is renowned for its durable and high-performance ovens. The Euromat series is popular due to its rapid heat-up time, even baking results, and ease of use. Prices excl. VAT Inspection possible. #Wiesheu #WiesheuEuromat #BakeryOven #BakeryEquipment #HorecaOven #InstoreBaking #WiesheuOven #BakeryEquipment #ProfessionalOven #MIWE #Wachtel #Bongard #Debag #SvebaDahlen #Salva Pgedpfx Asxyxt Hjmyep #CateringEquipment #BakeryOven #BakeryMachines

Condition: good (used), Year of construction: 2015, operating hours: 430 h, fuel type: electric, Holland-Lift Y 64 EL 14 Scissor Lift / Aerial Work Platform 8.4M Working Height Electric 2015. Inspection valid until 4-2026 Video can be sent via Whatsapp. Continuous stock available, see our website. Prices are ex Nuland. Pgjdpfsyi Spzsx Amysp Van de Wert Trading B.V. offers a changing stock of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). For a viewing and/or test drive, you can book a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Pedpfsw Dfhzsx Amysgp

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. Pgsdpfx Ajzp Iu Sjmyep *

Condition: used, functionality: fully functional, very robust gearbox, motor 1.0 / 1.8 kW Saw blades: 360 mm Slow-running model with 6 cutting speeds: 8 / 10 / 12.5 m/min 16 / 20 / 25 m/min Podszp Uxqepfx Amyogp Test cutting at our facility with the following specifications: Cutting capacity at 90 degrees with blade size 360 mm: Round profile: 110 mm Solid round material: 80 mm Flat profile: 200 x 80 mm Weight approx. 560 kg