Used Abb 4400L/10 for sale (30,430)

Condition: refurbished (used), functionality: fully functional, overall weight: 1,320 kg, load capacity: 185 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 6640-185/2.8 with IRC5 Controller, fully refurbished and with 6 months warranty - delivered into Europe duty paid so no additional costs on top Bodpfx Amszclkljredh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, total height: 1,000 mm, total length: 11,570 mm, total width: 2,440 mm, load capacity: 10,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 10,000 kg – Lifting height: 6 m – Year of manufacture: 2001 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m Dimensions – Span: 11,400 mm centre-to-centre – Overall length: 11,570 mm – Installation height: 660 mm – Width of wheel set including buffers: 2,440 mm Bdjdpfx Asz Hb Uqomreh – Width of wheel set excluding buffers: 2,300 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm Features – Control: wired control panel – Crane manual available: no, to be prepared – Condition: in good working order – Dismantled: yes, available immediately

Year of construction: 2006, operating hours: 12,169 h, condition: ready for operation (used), overall weight: 1,400 kg, Rotary table wheel blast machine manufactured in 2006. This C.M. T-10 features a turntable diameter of 1,000 mm and a usable height in the workspace of 450 mm. It has a maximum permissible table load of 900 kg and operates with a blast wheel power of 5.5 kW. If you are looking to get high-quality blasting capabilities, consider the C.M. T-10 machine we have for sale. Contact us for further details. - Mains Voltage: 400 V- Number of Phases: 3 Ph / 3+PE- Frequency: 50 Hz- Operating Load (Power): 4.741 kW- Operating Load (Current): 10.02 A- Short Circuit Protection / Interrupting Capacity: 30 kA- Max. Motor Current: 7.90 A- Blast Wheel Power: 5.5 kW- Turntable Diameter: 1,000 mm- Usable Height in Workspace: 450 mm- Max. Permissible Table Load: 900 kg- Control Unit / HMI: ESA VT50- Safety Interlock Switch: Telemecanique XC2SE7311 / XC2SE- Included Equipment / Scope of Delivery: All required cables and hoses for direct commissioning, screw holders for angular positioning of workpieces inside the blasting chamber Bjdpfx Aoz Ha Enomrjdh

Condition: used, mileage: 4,315 km, power: 125 kW (169.95 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, number of seats: 3, loading space volume: 25.9 m³, loading space length: 4,860 mm, loading space width: 2,210 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), soot filter, traction control, Seat covers in fabric, 9-speed automatic transmission, air conditioning, electrically adjustable/folding/heated exterior mirrors, electrically operated front windows, lane keeping assist, cruise control with speed limiter, partition, spare wheel, LED daytime running lights, DAB radio, emergency call system, tire pressure monitoring system, driver airbag, ABS, electronic stability program (ESC), start-stop system, particulate filter, passenger seat, driver attention assist, driver's seat, tinted windows, remote central locking, front seat belt height adjustment, glove compartment with drawer, interior lighting, manually dimmable interior rearview mirror, left-hand drive, rear lights, gear shift indicator, wireless phone charging, wide-angle rearview mirror. Financing example: * Cash price: 46,172.00 euros * Down payment: 9,234.00 euros * Term: 60 months Bdodpfx Amoz E R I Rjrsh * Net loan amount: 36,938.00 euros * Effective annual interest rate: 6.49% * Nominal interest rate (fixed) per year: 6.30% * Gross loan amount: 43,161.00 euros * Monthly installment: 719.00 euros *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for which the car dealership acts as a loan intermediary in an advisory capacity. Creditworthiness required. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to change, errors and prior sale. Delivery possible for an additional charge. Export license plates available here. We will also accept your old vehicle in part exchange. Retrofitting options: - Trailer couplings, also up to 3500 kg - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear view camera - Workshop equipment - Cruise control - Retrofitting of a tail lift and other individual solutions for your business needs possible for an additional charge.

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 Bodpfx Ajz E H Rzsmredh 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Year of construction: 1997, condition: ready for operation (used), For sale is a mixer motor from YTRON. It is model Y 18.00 - 8.4 / T 10 - IV. The year of manufacture is 1997. RPM: 1375 Voltage: 380 - 420 Bodpjga Dznofx Amrodh Power: 18 kW Connection: DN150 Further data can be found in the data sheet.

Condition: used, functionality: fully functional, mileage: 28,750 km, power: 110.32 kW (149.99 HP), first registration: 12/2006, fuel type: diesel, fuel: diesel, number of seats: 9, From our used vehicle inventory, we offer you: Bdodsyrgytepfx Amrjh Fire Engine LF 10 on MB ATEGO 815 4x2 Chassis • Mercedes Benz MB 815D with manual transmission • 110 kW/150 HP with 4249 cm³ displacement • Power steering • Trailer coupling • First registration: 12/2006 • Mileage: approx. 28,750 km • Three-point seat belts for all 9 seats Body • Manufacturer: Rosenbauer • 2 breathing apparatus holders in the crew cab + 2 in the equipment compartment • Body design LF 10 according to DIN 14530-5 • FPN 10-1000 fire pump • 1,000 l water tank • Storage for standard equipment • FIAMM signalling system • 230 V trickle charger The vehicle receives a complete inspection and maintenance. All technical components such as the engine, transmission, differential, and pumps are thoroughly checked, and all filters and lubricants are replaced. The vehicle will be delivered with a current TÜV inspection and safety inspection (SP). We will be happy to provide you with a detailed offer and introduce the vehicle to you in detail. Note: All information given to the best of our knowledge, without guarantee of completeness or accuracy. Images may show optional equipment. This is not a binding offer, but for information purposes only. Subject to prior sale.

Condition: excellent (used), Catalog number: 8111 TECHNICAL DATA Circular saw: - max. saw blade diameter: 400mm - spindle: 30mm - blade adjustable front/rear - motor: approx. 3.4kW Milling machine: - spindle: - spindle diameter: 40mm - working height of spindle: 180mm - spindle lock - max. milling cutter diameter: 400mm - motor: approx. 7.5kW - 2 types of rotational speeds: 3500, 7000 rpm - electric brake - material clamping on the carriage: pneumatic, from above and from the side - side carriage adjustable up/down, front/rear and at an angle - support extending from the table - angle ruler - diameter of dust extraction nozzles: 80mm, 150mm - dimensions (L/W/H): 2620(162mm)x1960x1700mm - weight: 900kg ADVANTAGES - Polish production - upper control panel - used mortising machine, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations) Bdodpoz Eaztjfx Amrsh

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve Options: 1 x Videojet BX 6500 ( 2019 ) Bsdpfxjz A Dmhj Amrodh TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used Bdodpfx Amjzkbpfsroh We provide a start-up guarantee.

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, working height: 150 mm, height adjustment type: electric, grinding belt length: 2,150 mm, SCM Sandya 10 wide belt sanding machine Working width: 1100mm Working height: 5-150mm Number of sanding units: 2 1. Metal calibrating roller Bedpfxjz Huwre Amrodh 2. Metal combi unit with sanding shoe Combi unit with sanding belt blowing system Two feed speeds Material thickness gauge Main motor power: 15kW Machine weight: 1750kg Machine dimensions: 165x186x206cmH

Condition: ready for operation (used), Year of construction: 2007, Available immediately from our location: CNC vertical balancing machine, TIRA Type KV 10 Year of manufacture 2007 Rotor mass 1 – 10 kg Bdjdpfxsz Huzdj Amrjh Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm) 0.5 Drive power 2.2 kW Weight 1500 kg Price: EUR 2,000.00 (plus VAT, ex works)

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher Bodjz Hqrxepfx Amrsdh - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS Bdjdpfx Ajz Hqr Somroh - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 32221 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: new, table diameter 900 mm table load 1,0 t swivelling range 135 Grad turning speeds 0,12 - 1,2 U/min 820 mm welding current 500 Ampere total power requirement 0,75 + 0,55 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. Bedpfx Amjfv Axxerodh • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: used, Year of construction: 2011, weight max. in kg 1000 kg fork length 1150 mm stroke height 3200 mm high 2060 mm weight of the machine ca. 0,8 t Bdodpfx Asyx Iqhsmroh dimensions 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve

Condition: like new (used), Year of construction: 2014, functionality: fully functional, overall weight: 1,000 kg, Moda Meccanica mixer for material; we used it for LDPE virgin and recycled material. Bjdpezfikasfx Amrodh Capacity: 1 ton

Condition: new, table diameter 180 mm 10 Kg Bedpfx Aei Hg Iyjmrsdh 5 Kg chucking diameter 65 mm turning speeds 2 - 20 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: used, Year of construction: 2018, operating hours: 6,000 h, Includes Schaeff quick coupler. Bdjdpfez H Hr Ijx Amrsh Includes 2 deep-dig buckets. Location: Andernach.

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 200 kg Bdedpfjz D R T Dex Amroh Please contact Gebrauchtgeräte Center for more information

Condition: good (used), ABB Robot FlexPicker Delta4 Here we offer an ABB robot FlexPicker Delta4. ABB Robot FlexPicker Delta4 IRB 340 with controller IRC5 M2004 Payload 1 kg Position accuracy: 0.1 mm Angular repeatability: 0.4 Working range in diameter: 1,130 mm Height: 250 mm Weight approx.: 300 kg Type: Robot IRB 340 / Control IRC5 M2004 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Bedpsqzw Ttefx Amredh We will be happy to answer any further questions you may have on the phone.

Condition: new, sheet width 1000 mm plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW weight of the machine ca. 0,445 t Bdodperb Hcbjfx Amroh dimensions of the machine ca. 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 1000 x 3 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW Bdjdpfjfv A A Ajx Amrjh

Condition: new, Capacity 10 Kg internal dimension 135 x 80 x 480 mm output 0,5 kw connected load frequency 220 - 240 V setting device 30 - 180 Grad weight 15 kg Bjdpoupxb Aefx Amrodh dimensions 600 x 250 x 200 mm

Year of construction: 2015, operating hours: 100 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4S 10kN 2268/000 1215 902, Dyna-Mess TP 10kN HF Cyclic Testing Machine / Endurance Testing System – Top Condition, including temperature chamber (up to 120°C) & software Description: Manufacturer: DYNA-MESS Prüfsysteme GmbH Model: TP 10kN HF (Servopneumatic High-Frequency Cyclic Testing Machine) Maximum test force: 10 kN (static and dynamic range) Maximum machine travel: 12 mm Date of purchase: December 2015 Condition: Almost new, very little use, immediately ready for operation (Plug & Play) Availability: Immediately For sale is a compact, high-precision cyclic testing machine from the premium manufacturer DYNA-MESS with a 10 kN nominal load and 12 mm stroke. The system was acquired for dynamic endurance tests and lifetime determination as part of a research project, and has not been used since. It is in excellent, virtually new condition both visually and technically. The complete package includes a matching temperature chamber with controller up to 120°C. This enables standard-compliant, dynamic testing of components and materials under realistic thermal environmental conditions. System & Scope of Supply: Load frame Dyna-Mess TP 10kN HF with high-precision force and displacement sensors. Complete PC including installed and calibrated control software DYNA-TCC under Windows 7. The system operates completely independently and is immediately ready for use. Temperature chamber with external control unit for tests up to 120°C. All associated documentation and connection cables. The machine is perfectly suited for laboratories, universities, or quality assurance departments looking for a reliable system for fatigue and endurance testing without incurring the cost of a new machine. Inspection of the machine is possible by prior arrangement. As this is a commercial sale, the machine is sold ex works without warranty or guarantee. The sale is preferably to a buyer who arranges self-collection (dismantling and transport must be organized by the buyer). Bodpfx Aozunz Nsmredh Price: €20,000 negotiable plus VAT.