Used 5,000 Litre Pfaudler Model Be5000 Vertical Glass Lined Reactor for sale (34,609)

Condition: used, Year of construction: 2018, operating hours: 319 h, machine/vehicle number: 5453, load capacity: 200 kg, overall weight: 2,680 kg, construction height: 2,000 mm, product width (max.): 1,030 mm, enginetype: Electric, manufacturer: Haulotte Nodpfx Afezcbcqj Sowl

Condition: good (used), Manufacturer: Jungenthal Year of manufacture: 1960 Type: DKE 1200 Machine number: WM 141 Faceplate diameter: 1,180 mm Table diameter: 1,400 mm Maximum turning height: 1,300 mm Speed range: 4.5 to 140 rpm Feed rate: 0.063 to 5.4 mm/rev Tool holder: Equipment: extended ram support, stop mechanism, measuring device Condition: good, ready for operation Connection: 25 kW Nwsdoz A U Uvspfx Af Sol Weight: 13 t Dimensions: mm

Condition: like new (used), Year of construction: 2024, operating hours: 660 h, functionality: fully functional, overall weight: 8,255 kg, HAAS VF-6SS Vertical Machining Center – 2024 2024 HAAS VF-6SS Vertical Machining Center in excellent condition, purchased new in 2024 and with very low operating hours. The machine has been used only for a specific production project and remains in outstanding mechanical and cosmetic condition. Equipment HAAS HRT310 Rotary Table (4th Axis) HTS9 Tailstock WIPS – Wireless Intuitive Probing System Through Spindle Coolant (21 bar) Through Tool Air Blast (TAB) High Speed Machining (HSM) 12,000 rpm Direct Drive Spindle Nwjdpfx Afszrhrce Sjl 22.4 kW Spindle Motor Haas Next Generation Control Ethernet & USB Automatic Lubrication The machine can be inspected under power in Portugal. Immediately available.

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 220 294-0059, travel distance X-axis: 1,650 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, controller manufacturer: Heidenhain, table width: 780 mm, table length: 1,800 mm, overall weight: 11,400 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC vertical machining center TAJMAC-ZPS MCFV 1680 NT, year of manufacture 2001, Heidenhain control. Nedpfx Afsz A Uhps Sjwl Type MCFV 1680NT P26.00, No. 220 294-0059, weight 11,400 kg, connection 400 V, 100 A, 50 Hz. Travel ranges X/Y/Z: 1,650 x 810 x 810 mm, table area 1,800 x 780 mm with 5 T-slots. Equipment: full enclosure, chip conveyor with chip cart, electronic handwheel, signal light. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee.

Condition: used, Year of construction: 1991, machine/vehicle number: 15453 91, functionality: unexamined, Vertical metal bandsaw, Heska SB 4, manufactured in 1991. Machine no. 15453 91, band length 3,200 to 3,400 mm. Band welding device with shear on the stand, height-adjustable upper band guide with protection. Nsdpfjz A Umxsx Af Sswl Cutting data selector dial, work light, work table with groove profile. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: Welding and deburring line with a turning table for PVC windows. The line consists of: Njdpfoz A R I Ejx Af Sowl - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame turning - ROTOX EPA 472, year 2005. The production line was only used in Germany and is in very good condition, having been regularly serviced. Negotiable price: 25,000 euros + VAT.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h Nwsdpfx Afjz A Dxko Sol • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Nsdpfsun Rqgox Af Sjwl Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Logsorting line with 19 sorting pockets, electrically driven kickers, never installed and used. For sale full mechanical part of the line, metaldetector, no operating equipment. Log scanner with control system can be offered separately. Njdjz Dgk Sspfx Af Sewl Line installation and start-up can be offered as turn-key project

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg Nedeyi U Ugopfx Af Sowl 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Nwjdez Diqbjpfx Af Sol Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Automatic tool changer: 21 positions Maximum table load: 300 kg Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine type: 5-axis CNC vertical machining center Control system: Heidenhain iTNC 530 Travel in X: 700 mm Travel in Y: 660 mm Travel in Z: 480 mm A-axis: ±110° C-axis: 360° Max. spindle speed: 15,000 rpm Spindle connection: SK 40 Tool changer: 48 tool positions Machine weight: approx. 10,000 kg Configuration: X / Y / C / A + Z Design: 5-axis simultaneous machining Njdpfx Aoz Dd U Ijf Sswl

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM machining center, year of manufacture 1997, are for sale: 9 pcs. tool arms 1 pc. spindle 1 pc. Siemens spindle motor Nsdpjxdhp Eefx Af Sswl

Condition: used, Year of construction: 1983, Used Machine Nwodpfxozyy Eds Af Ssl Year of manufacture: 1983 Features and technical specifications: - Automatic - Cutting length: 5,300 mm - Cutting height: 2,200 mm - Max. horizontal cutting height: 2,100 mm - Max. cutting depth: 80 mm - Motor: 5.5 kW - Saw blade diameter: 300 mm - Speed: approx. 5,000 rpm - Dimensions (L x W x H): approx. 6,550 x 1,500 x 2,950 mm

Condition: used, Year of construction: 2023, total length: 3,700 mm, • 8x Batterie, 215-260AH • 1x Steckdose im Korb • FI-Schalter • Generator • eingebautes Ladegerät • Maximaler Bodenauflagedruck 14,0 kg/cm2 • Fahrgeschwindigkeit – abgesenkt 6,0 km/h • Wenderadius – außen 2,60m • Wenderadius – innen 0,75m • Steigfähigkeit 30% • Arbeitshöhe 12,65m • Arbeitsbereich (Standard-Plattform) 6,05m • Knickpunkthöhe 7,12m • Schwenken (nicht Endlos-Drehung) 345° • Plattformtragfähigkeit 1 200 kg • Korbarm – Gesamtlänge 4,14m • Korbarm – vertikaler Arbeitsbereich 120° (+60° / −60°) • Hintereinstieg mit Schieberiegel • Voll proportionaler Joystick für Fahr- und Hubbewegung mit integrierter Wippe zur Daumenlenkung • 2 Mini-Joysticks ermöglichen eine proportionale Steuerung der Hub- und Senkbewegungen von Mast und Korbarm • 4,14 m Gelenkausleger • Funktionsaktivierung mit vergrößertem LCD-Statusdisplay • Lastüberwachungssystem • Wechselstromanschluss im Arbeitskorb • Große Werkzeugablage • Direkter, elektrischer Zweiradantrieb Nwjdpfxoxd Hrfo Af Sjl • Bürstenlose Wechselstrom-Antriebsmotoren • Schnellere Batterieaufladung • Automatische Stromsparfunktion bei Stillstand • Funktionsdrosselung bei Tiefentladung • Bordeigenes Diagnosesystem mit integriertem Display • Automatische Hinterradbremsen • Gewölbte Schutzhauben aus Polyester • Motorbetriebenes Schwenken der Plattform • Hochleistungsfähiger Stahlrollen- Hubmast, um 345° schwenkbar • Kettendurchhangerkennung • 3° Neigungsalarm mit Warnleuchte • Rahmenbreite 1,20 m • Hebe- und Zurr-Ösen • Schlüsselgesicherter Wahlschalter für Bodensteuerung • Batteriestandsanzeige • Betriebsstundenzähler • Hupe • Fahrausrichtungssystem • Gurtzeug-Ösen • Xenon-Rundumleuchte • Manuelle Notabsenkung • Passive Lochfahrschutz • Bereifung (abriebfest) 457 x 178mm • Elektrisches System 48V Gleichstrom • Batterien (tiefentladbar) 4 x 48 V – 260 Ah • Batterieladegerät Im Fahrzeug, 110 V / 230 V HF • Antriebsmotoren 2 Wechselstrommotoren • Elektrischer (Pumpen-)Motor 3,5 kW, 48 V Gleichstrom • Hydrauliksystem Hydraulikbehälter 15 l

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Nodpfx Afsrtryks Sjwl Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Nwjdpfxjrtrzds Af Sol Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Boss Vakuum V 810 VA Vertical Vacuum Machine Professional Boss Vakuum V 810 VA Vertical Vacuum Machine – Ideal for liquids, powders, and stand-up pouches You are bidding on a used, extremely powerful, and fully functional vertical vacuum machine from the quality brand Boss Verpackungsmaschinen (Model V 810 VA). This industrial machine is specifically designed for the vertical vacuum packaging of large stand-up pouches, liquids (such as soups, sauces, and oils), granules, and powders. Thanks to its vertical design, the contents of the pouch are effectively prevented from spilling or shifting during the evacuation process. Nodpfx Afsz Dtdxe Sewl Technical Specifications Internal chamber dimensions: 850 x 670 x 200 mm (W x D x H) Seal length: 810 mm (large seal bar for maximum pouch widths) Vacuum pump: High-quality Busch rotary vacuum pump Control system: Intuitive Z 3000 sensor control with memory for up to 99 programs Liquid protection: Equipped with an H2O sensor for automatic boiling point detection (prevents boiling over/splashing) Power connection: 3-phase (400V industrial power) External dimensions: 1070 x 1000 x 1980 mm / 2200 mm with lid open Weight: approx. 470 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2013, Vertical machining center Machine type: DMG DMC 635 V / P Control: Heidenhain iTNC 530 Year: 2013 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Spindle speeds: 10.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 Palett system Amount of paletts: 2 Table size: 560 x 790 mm Equipment Njdpsz Dkt Dsfx Af Sowl No cooling through spindle Electronical handwheel Caliper: TS649 Tool measurement: Tischtaster Chip rinsing pistol

Condition: good (used), Year of construction: 2003, Vertical machining center Machine type: Wemas VZ 750 Control: Heidenhain iTNC 530 Year: 2003 SPECIFICATIONS Nwodpfx Afjz Dkryj Ssl Travel X-Axis: 750 mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 25 m/min. Max. revolution: 8.000 rpm Spindle power: 7,5 kW Tool: SK 40 Tool capacity: 20 Table size: 1.000 x 500 mm Max. Table Load: 400 kg Equipment Chip conveyor Internal cooling: bar Caliper: Nein

Condition: used, Year of construction: 2023, total length: 3,650 mm, • 8x Batterie, 215-260AH • 1x Steckdose im Korb • FI-Schalter • Generator • eingebautes Ladegerät • Maximaler Bodenauflagedruck 14,0 kg/cm2 • Fahrgeschwindigkeit – abgesenkt 6,0 km/h • Wenderadius – außen 2,60m • Wenderadius – innen 0,75m • Steigfähigkeit 30% • Arbeitshöhe 12,65m • Arbeitsbereich (Standard-Plattform) 6,05m • Knickpunkthöhe 7,12m • Schwenken (nicht Endlos-Drehung) 345° • Plattformtragfähigkeit 1 200 kg • Korbarm – Gesamtlänge 4,14m • Korbarm – vertikaler Arbeitsbereich 120° (+60° / −60°) • Hintereinstieg mit Schieberiegel • Voll proportionaler Joystick für Fahr- und Hubbewegung mit integrierter Wippe zur Daumenlenkung • 2 Mini-Joysticks ermöglichen eine proportionale Steuerung der Hub- und Senkbewegungen von Mast und Korbarm • 4,14 m Gelenkausleger • Funktionsaktivierung mit vergrößertem LCD-Statusdisplay • Lastüberwachungssystem • Wechselstromanschluss im Arbeitskorb • Große Werkzeugablage • Direkter, elektrischer Zweiradantrieb • Bürstenlose Wechselstrom-Antriebsmotoren • Schnellere Batterieaufladung • Automatische Stromsparfunktion bei Stillstand • Funktionsdrosselung bei Tiefentladung • Bordeigenes Diagnosesystem mit integriertem Display • Automatische Hinterradbremsen • Gewölbte Schutzhauben aus Polyester • Motorbetriebenes Schwenken der Plattform • Hochleistungsfähiger Stahlrollen- Hubmast, um 345° schwenkbar • Kettendurchhangerkennung • 3° Neigungsalarm mit Warnleuchte • Rahmenbreite 1,20 m • Hebe- und Zurr-Ösen • Schlüsselgesicherter Wahlschalter für Bodensteuerung • Batteriestandsanzeige • Betriebsstundenzähler • Hupe • Fahrausrichtungssystem • Gurtzeug-Ösen • Xenon-Rundumleuchte • Manuelle Notabsenkung • Passive Lochfahrschutz • Bereifung (abriebfest) 457 x 178mm • Elektrisches System 48V Gleichstrom • Batterien (tiefentladbar) 4 x 48 V – 260 Ah • Batterieladegerät Im Fahrzeug, 110 V / 230 V HF Nedpfoxd Hx Ssx Af Sowl • Antriebsmotoren 2 Wechselstrommotoren • Elektrischer (Pumpen-)Motor 3,5 kW, 48 V Gleichstrom • Hydrauliksystem Hydraulikbehälter 15 l

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Nodpjzwxz Eefx Af Sswl Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024 Nodpfx Ajvgt Upef Sowl   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Year of construction: 2000, machine/vehicle number: LC405, Used filling line for edible oil up to 1800 bph Introduction The filling line for edible oil up to 1800 bph represents an advanced technological solution in the bottling sector. This system, branded Almanah Alman, guarantees efficiency and reliability essential for modern production needs. Capacity and Dimensions Equipped with a production capacity of 1800 bottles per hour for 1 liter PET containers, this line stands out for its high productivity. The overall length of the line is 6.3 meters, an important detail for planning the installation space in its warehouse. Filler Specifications in the Filling Line Used for Edible Oil The heart of Filling Line is the 18-valve filler, which operates through a pressure filling system. This method ensures rapid and efficient distribution of the product in the filling line for edible oil. Which ensures the maintaining, integrity and quality of the edible oil. Capper and labeller The capper is equipped with 6 heads and fits plastic pressure caps, ensuring safe and precise closure of bottles. The label maker, on the other hand, applies a paper label using liquid glue, allowing a clean and professional finish to the product in the used filling line for oil. Nwedpfxevguagj Af Sjl Installed power needed by the filling Line Used for Edible Oil The line requires an installed power of 3 kW, an aspect to be considered for energy optimization and sustainability of the production process. This feature underlines the energy efficiency of the filling line used for edible oil in the industrial context. Conclusion The filling line used for edible oil up to 1800 bph Almanah Alman represents an ideal technological solution for those seeking efficiency and reliability in the bottling sector. With its high production capacity and advanced technical specifications, this machine is able to meet the most demanding needs of edible oil producers.

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Nwedjvguwljpfx Af Sel Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.