Used Wiese Gabelstaplertransporter Zwangslenkung for sale (364)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Prjdpjx A Npdofx Af Ssb Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: used, mileage: 318,208 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,350 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, JUMBO COMPLETE ARTICULATED TRUCK | DAF XF 480 | LIFTING ROOF | THROUGH-LOADING | ONLY 318,000 KM COMPLETE JUMBO ARTICULATED TRUCK? IMMEDIATELY AVAILABLE! High loading volume, low mileage, and in excellent technical condition: For sale is a complete DAF XF 480 FAN 6x2 LowDeck Jumbo articulated truck, including a matching tandem trailer. The tractor unit and trailer form a complete, through-loading Jumbo articulated truck – ideal for transport companies handling large-volume and lightweight goods. TECHNICALLY EXCELLENT & READY FOR IMMEDIATE USE, NEW TÜV INSPECTION * In very good technical condition * Only approx. 318,208 km mileage * Ready for immediate use * Complete articulated truck immediately available THE COMPLETE PACKAGE: DAF XF 480 FAN 6x2 * Matching tandem Jumbo trailer included * First registration 06/2020 * Only approx. 318,208 km * 355 kW / 483 hp * Euro 6 Prjdpfxozwibpe Af Sob * Automatic transmission * LowDeck * Intarder * Air suspension JUMBO BODY: High-volume Jumbo body * Lifting roof * Through-loading function to the trailer * Side sliding tarpaulin * Edscha cover * Ideal for large-volume and lightweight transport goods CAB & COMFORT: Stationary air conditioning * Stationary heater * Air conditioning * Navigation system * Cruise control * Multifunction steering wheel * Sleeper cab * 2 sleeping berths * Refrigerator THE HIGHLIGHTS AT A GLANCE: Complete Jumbo articulated truck from a single source * New TÜV inspection * Technically excellent * Only approx. 318,000 km * Lifting roof * Through-loading function * 6x2 with steered 3rd axle * LowDeck * Tractor unit + matching tandem trailer * Immediately available and ready for use COMPLETE ARTICULATED TRUCK INCLUDING TANDEM TRAILER: €69,900 NET Get in, hitch up, and drive off. The complete Jumbo articulated truck is located at our site and can be inspected and test driven at any time by appointment. We will gladly send you additional pictures, technical data, or a video of the complete articulated truck upon request. We are happy to provide you with further information.

Condition: used, mileage: 17,173 km, power: 110 kW (149.56 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 17,173 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, trailer coupling, 115,431 km 17,173 operating hours Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Other services: - Various loading options - Registration service - Delivery possible within Germany for an additional charge Inspection possible without appointment: Mon. – Fri.: 08:00 to 17:00 Pedpfx Afowxzc Rj Serb Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: For more information, visit We speak German / English / Russian / Italian / French / Spanish More information Sale only to business customers (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Prjdozp Sz Ajpfx Af Ssb Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) Pedpfx Ajy Hm Eysf Ssrb ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating feature (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel plate is then mounted on the chassis. The crane and superstructure, including the fifth wheel plate, can also be used in combination. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler undercarriage would also be available; the net price is €149,900. ? Mounting/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable stake pockets. ? Standard platform floor with welded 4 mm steel checker plate, painted in RAL (chassis color). ? 6 recessed lashing eyes, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 lashing points for chains 6500 daN (2 in the front and 2 in the rear of the superstructure). ? Stable front wall consisting of a welded frame, welded steel sheet 4 mm and 5 accessory hooks, front wall height approx. 1300 mm, steel, painted, with 2 folding eyelets for lashing straps, welded on. ? Side panels, mudguards made of aluminum checker plate (sandblasted, powder-coated and painted). ? Multifix stake pocket rows, 2 rows with a distance of approx. 80 cm from the front and rear walls. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with endless rotation, fully assembled, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. Pjdpfoy Hm E Hjx Af Ssrb ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane are carried out according to the technical regulations and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection certificate. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on the left and one on the right, arrangement to be agreed upon. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available upon request.

Condition: used, mileage: 26,895 km, power: 110 kW (149.56 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 26,895 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, trailer coupling, The Mercedes-Benz KAMAG WBH 25 Wiesel transfer vehicle offers reliable performance with a diesel engine of 110 kW (150 hp) and a displacement of 4,249 cc. It is equipped with an automatic gearshift and has a mileage of 245,259 km. The Euro 3 emissions class ensures environmentally friendly use. The vehicle was built in 2012 and is finished in a metallic yellow color. The vehicle is ideal for commercial use, be it in agriculture or in the special logistics sector, thanks to its versatile loading capacities and robust design. It has a gross vehicle weight of 18,000 kg and is equipped with important features such as a rear view camera, air suspension on the rear axle and an emergency seat. It offers sufficient space with two doors and two seats. Prodpfx Asutpilef Seb Mileage: 245,259 km Operating hours: 26,895 hours Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8 with Fassi F705R.2.6 Loading Crane MAN vehicle equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 HP) * TN driver’s cab * Main wheelbase: 2,980 mm * 2 batteries, 12 V, 175 Ah * 390-litre fuel tank, left * 35-litre AdBlue tank, right * Air compressor, 1 cylinder, 360 ccm * Pneumatic air processing unit * Emergency braking assistant * MAN EVBec high-performance engine brake, multi-stage * Drum brakes * MAN D2676 LF78 diesel engine, 375 kW (510 HP), 2,600 Nm torque, Euro 6d * Pre-fuel filter with oil/water separator * Automatic transmission * Front axle tires: 385/65R22.5 Predpfeywfw Ajx Af Sob * Rear axle tires: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanical roof hatch * Central locking with remote control * LED daytime running lights * 2 rotating beacons on cab roof (1 right, 1 left) * 2 work lights on cab roof (1 right, 1 left) * Exterior mirrors, electrically adjustable with maneuvering feature, heated * Prewiring for 2 cameras, one linked to reverse gear * Driver’s seat heating * Comfort driver’s seat, air-suspended * Multifunction steering wheel, height and tilt adjustable * 2 power sockets (12 V and 24 V) in cabin center * Air-conditioning system, Climatronic * Additional water heater, 4 kW * Folding interior sun visor (windscreen) * Sunblinds for door side windows * MAN Mediasystem Navigation Advanced 7 inch * MAN Soundsystem Advanced with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Cab finish: PURE WHITE RAL 9010 Crane equipment: * FASSI F705R.2 TECHNO loading crane * Continuous slew range * Dual linkage system with PROLINK (overextendable jib up to 10°) * Electronic overload cut-off device with FX900 * FASSI stability control FSC-SII incl. LMB II * Emergency shut-off as well as visual alarm (90% and 100%) * XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) * Radio remote control with linear levers and display of pressure values (in bar and %) * Emergency manual control for crane * Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base * Hydraulic outriggers, extendable on both sides, support width 8.29 m * Outrigger operation by radio remote * Standard color RAL 3020 traffic red – all cylinders painted black * Load hook and mounting brackets (short/500 mm) Full vehicle equipment available on request. For further information, please feel free to contact us.

Condition: used, mileage: 101,964 km, power: 129 kW (175.39 HP), first registration: 04/2020, overall weight: 6,500 kg, fuel type: diesel, color: orange, next inspection (TÜV): 10/2024, gearing type: mechanical, emission class: euro6, total length: 5,800 mm, total width: 2,350 mm, total height: 2,750 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, central locking, Canter TF 1 series Local transport cab Colored glass Central locking with remote control Isringhausen suspension seat 3 seats Wheelbase 3415 mm Euro 6 engine, OBD Step D All-wheel drive, 4 x 4 Power take-off for hydraulic pump 200 Nm Differential lock Additional console for reinforced generator Rear underride guard Vehicle batteries reinforced 2 x 100 AH Battery cover Radio with Bluetooth Heated rear view mirror Automatic climate control Light warning buzzer Driver comfort suspension seat Lamp bracket with auxiliary headlights Rotating beacons Protective grille behind cab Rear view window AdBlue tank Trailer coupling Ball head trailer coupling 12 V socket Front and rear traction tires Spare wheel holder, double secured Manual speed sensor Engine speed Schmidt dual-circuit municipal hydraulics Snow plow control in the cab with relief Schmidt size 3 front attachment plate Jota skip handler with telescope Remote control with cable Fire extinguisher Psdpsvb Rwwofx Af Sjrb Further information on request

Condition: used, mileage: 22,797 km, power: 110 kW (149.56 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 22,797 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, trailer coupling, The Mercedes-Benz KAMAG WBH 25 Wiesel is a versatile yard tractor, ideally suited for specialized transport tasks. With an impressive mileage of 208,455 km and 22,797 operating hours, it demonstrates robustness and reliability in operation. The vehicle is powered by a 150 hp diesel engine compliant with Euro 3 standards and features an automatic transmission. The KAMAG WBH 25 offers practical features such as a reverse camera and rear air suspension for enhanced driving comfort. The fifth-wheel coupling enables flexible loading and unloading, while the air conditioning and Webasto auxiliary heating system ensure comfortable working conditions. Vehicle dimensions—2,900 mm high, 2,550 mm wide, and 9,300 mm long—and a permissible gross weight of 18,000 kg make it optimally designed for industrial applications. Podpjy N Embofx Af Sorb This used model was first registered in July 2012. Mileage: 208,455 km Operating hours: 22,797 hrs Sale exclusively to business customers (agricultural operations, freelancers, small and large commercial enterprises) or for export. Subject to prior sale and errors.

Condition: used, power: 141 kW (191.71 HP), Year of construction: 2020, operating hours: 2,745 h, Equipment: ABS, air conditioning, all wheel drive, front linkage, * General Data * Model: JCB FastTrac 4190 * Year of Manufacture: 2020 * Vehicle Type: Compact Tractor/Carrier Vehicle (FastTrac Series) * Application: Construction, Agriculture, Off-Road Operations, Material Transport * Dimensions and Weight * Wheelbase: approx. 2981 mm * Overall Length: approx. 5270 mm * Width: approx. X mm (with/without attachments) * Attachment/Stability Features: Integrated profile/side guidance, optional ballast weight * Operating Weight (unladen/approved): approx. 12990 kg * Engine and Performance Data * 60 km/h approval * Engine Version: Diesel engine (Common-Rail/Turbocharger depending on equipment) * Displacement: approx. 6596 cm³ * Power: approx. 141kW * Fuel System: Turbocharger, exhaust aftertreatment (e.g. DPF depending on model) * Cooling: water-cooled engine, oil cooler Podpozl Itgjfx Af Serb * Drive and Chassis * Drive: All-wheel drive (4x4) or all-wheel drive/rear-wheel drive, optional automatic brake control * Transmission: hydrostatic or synchronized manual transmission (depending on version) * Oscillating Axle/Steering: Steering angle for tight spaces * Ground Clearance: approx. 300 mm * Payload/Lifting Forces: Lifting capacity according to model designation * Hydraulics and Accessories * Hydraulic Pressure: approx. 180 bar * Hydraulic Flow: Main circuit/secondary circuit depending on version * Pressure and Flow Control: Proportional control, joystick operation * Connections: Quick couplings, front/rear hydraulics * Front Loader Compatibility: yes * Attachments/Equipment Features * Front Loader: * Rear Hydraulics: available * Quick Change Systems: available, type (e.g. oil hose quick change system) * Front Attachment (e.g. front hydraulics) * Cabin and Ergonomics * Cabin Type: enclosed operator cabin * Field of View: 360° all-round visibility, large front window * Driver Comfort: Steering wheel adjustment, seat comfort, air conditioning/heating * Operation: Joysticks/multifunction lever, button layout * Noise Level: typical value in the interior (dB/A) * Electrical System and Systems * On-board Voltage: 12V * Display/Control Panel: Multifunction display, telemetry option * Safety: Hill start assist, optional reversing camera, retractable warning signs * Diagnostic System: OBD/manufacturer diagnostic tool available * Safety and Protection * Rollover Protection (ROPS)/Sun Visor: available * Seat Belts: 3-point seat belt * Hydraulic Protection/Covers: Fenders, covers * Lighting: Work lights front/rear, turn signals * Maintenance and Condition * Maintenance Condition: regular maintenance according to manufacturer's schedule * Oil/Filter Change Intervals: according to manual * Special Features (reflection of equipment) * Modern Comfort Package: Air conditioning, radio, USB port * Telemetry Option: Fleet management available * Safety Extras: Reversing sensor/camera, immobilizer * Fassi loading crane F135A.2.23 * Linear remote control * Hydraulic winch V20 * 3-point support * Swivel supports * Operation with two-shell grapple possible * Additional hydraulics at crane tip with quick coupler * 420° swivel range The JCB machine is available immediately, subject to prior sale.

Condition: used, mileage: 26,650 km, power: 110 kW (149.56 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 26,650 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, trailer coupling, The Mercedes-Benz KAMAG WBH 25 Wiesel Terberg transfer vehicle offers a combination of reliability and performance for commercial use. This used vehicle was first registered in 2012. The diesel engine with an output of 110 kW (150 hp) complies with the Euro 3 emissions standard and is equipped with an automatic transmission. The vehicle's dimensions are 9,300 mm long, 2,550 mm wide, and 2,900 mm high, with a permissible gross vehicle weight of 18,000 kg. The vehicle has a yellow Class 3 environmental sticker and offers space for two passengers. It is equipped with air conditioning and a Webasto heater, which increases driving comfort. Mileage: 207,254 km Psdpfx Aor Uzmusf Sjrb Operating hours: 26,650 hours Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. Prodpfxjwtaire Af Ssb • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets 6 x lashing eyes, 6500 daN Toolboxes Trailer coupling (AHK) Storage compartments Prodpowuhxwsfx Af Sjb Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets 6 x lashing eyes, 6500 daN Toolboxes Trailer coupling (AHK) Psdpfx Aowuhw Hof Sjrb Storage compartments Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: used, mileage: 17,643 km, power: 110 kW (149.56 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 9,500 kg, overall weight: 18,000 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2011, operating hours: 17,643 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, parking heater, trailer coupling, The Mercedes-Benz KAMAG WBH 25 Wiesel, a transfer vehicle with fifth wheel coupling, is ideal for use in the logistics sector. Powered by a 4,249 cc diesel engine with 110 kW (150 hp), this truck meets the requirements of the Euro 3 emissions class and offers an automatic transmission for easy operation. The vehicle was first registered in December 2011. The yellow metallic paint and the environmentally friendly yellow sticker complete the picture. With a width of 2,550 mm and a total length of 9,300 mm as well as a permissible total weight of 18,000 kg, the KAMAG WBH 25 Wiesel offers sufficient loading volume. The generous equipment includes air conditioning and Webasto thermal technology, which ensures pleasant temperatures in the driver's cab. Further details such as a well-maintained technical condition and versatile loading options make this vehicle a practical and reliable choice for businesses in the agricultural, logistics or export sectors. Prodpfor Uzl Tox Af Sob Mileage: 145,309 km Operating hours: 17,643 hours Only sold to business owners (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Prodpfx Afox A Nnts Sob Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio Prodpfxezqhxme Af Seb 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: used, mileage: 26,650 km, power: 110 kW (149.56 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 26,650 h, construction height: 2,900 mm, Equipment: ABS, The Mercedes-Benz KAMAG WBH 25 Wiesel Terberg transfer vehicle is a used commercial vehicle that is characterized by its versatility and robustness. Powered by a 150 hp diesel engine with a displacement of 4,249 cc, it meets the requirements of the Euro 3 emissions class. Equipped with an automatic transmission, it offers comfortable handling. Prsdpor Uzmqjfx Af Ssb This commercial vehicle has a permissible total weight of 18,000 kg and offers a driving height of 2,900 mm. The external dimensions are 9,300 mm in length and 2,550 mm in width, which gives it enough space for different transport tasks. The yellow metallic paintwork underlines the visibility and the professional impression in daily use. The vehicle comes with a yellow level 3 environmental sticker. Mileage: 175,664 km Operating hours: 26,650 hours Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 26,789 km, power: 110 kW (149.56 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, next inspection (TÜV): 10/2026, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 26,789 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, trailer coupling, 236,811 km 26,789 operating hours Prjdpfx Afoww Nw Tj Sjb The Mercedes-Benz KAMAG WBH 25 Wiesel is a specialized terminal tractor with a fifth wheel coupling, ideally suited for operations in large industrial facilities. This used 2012 vehicle has a total mileage of 26,789 km and 26,789 operating hours. Powered by a robust 4,249 cc diesel engine delivering 110 kW (150 hp), it ensures reliable performance and meets Euro 3 emissions standards. The vehicle is equipped with an automatic transmission and offers seating for two in a two-door configuration. The vehicle measures 9,300 mm in length, 2,550 mm in width, and 2,900 mm in height. It features a gross vehicle weight rating (GVWR) of 18,000 kg, making it ideal for heavy-duty transport requirements. Additionally, it is fitted with a yellow emissions sticker (Stage 3). The yellow metallic paintwork gives the vehicle a distinctive appearance. This vehicle offers practical features including air conditioning and a Webasto auxiliary heater for enhanced comfort and convenience. It previously had one owner and is certified until October 2026. Viewings are possible without prior appointment, offering flexibility to interested parties. Delivery within Germany is available for an additional charge. Sale exclusively to commercial customers (agriculture, freelancers, small and large businesses), or for export. Subject to prior sale and errors excepted.

Condition: new, maximum load weight: 32,969 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,390 mm, loading space height: 1,690 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SKS.Y 27 m³ Steel Tipper Body | BPW | Lift Axle | Cramaro | NEW Vehicle Description: For sale is a new Kässbohrer 3-axle steel semi-circular tipper with a 27 m³ payload volume. This vehicle is ideally suited for the transport of sand, gravel, excavated material, and other bulk goods. Technical Data: Kässbohrer SKS.Y / K.SKS B / 27-12/27 * 3-axle semi-trailer tipper * Payload volume: 27.0 m³ * Permissible total weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Tare weight: approx. 6,031 kg * Loading length: 7,900 mm * Internal width: 2,390 mm * Overall width: 2,550 mm * Tipper body internal height: 1,690 mm * Saddle height: 1,220 mm * Overall length: approx. 8,675 mm * Vehicle height: approx. 3,430 mm Order_KB_254601-2 Order_KB_254601-2 Chassis / Axles: BPW AL II axles * 3 x 9,000 kg * Air suspension * Disc brakes * Lift axle on the 1st axle * Automatic EBS-controlled lift axle control * WABCO EBS 2S/2M * RSS stability control system * eTASC electronic/manual air suspension control * Automatic bellows discharge system when tipping * Tilt angle warning system in case of more than 3° inclination * Cathodic dip-coated chassis * High-strength S700 MC steel Order_KB_254601-2 Order_KB_254601-2 Tires: 385/65 R22.5 * Premium European tire brand, as selected by Kässbohrer * M+S tires * Steel rims ET 120 * 6 wheels Order_KB_254601-2 Tipper Body: Steel semi-circular tipper body * 27 m³ volume * Front wall: 4 mm HB450 * Side walls: 4 mm HB450 * Rear wall: 4 mm HB450 * Floor: 4 mm TUF500 * Mechanical rear gate with double hinge Prjdjz Ec Snopfx Af Ssb * 2-fold compression lock * Rubber seal on the tailgate Order_KB_254601-2 Tarp / Hydraulics: Cramaro Cabriole Type C * Electric tarp system * Remote control * 300 mm arch height * 5-stage HYVA tipping cylinder * Max. working pressure 250 bar * Pneumatic operation * 2 m hydraulic hose Order_KB_254601-2 Additional Features: 2 work lights at the rear * Tire pressure monitoring system (TPMS) * Body-Fix system for stabilizing the tipper body * Plastic toolbox * 40-liter water tank * Document box * Folding aluminum underride guard * Aspöck Europoint III lighting * LED side marker lights * Automatic safety braking system when the tipper body is raised Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Color: Chassis: RAL 9005 Deep Black * Tipper body: RAL 9010 Pure White * Tarp: RAL 9010 Pure White We are available to answer any further questions you may have.

Condition: used, mileage: 44,723 km, power: 353 kW (479.95 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2027, color: white, gearing type: automatic, emission class: euro6, total length: 10,490 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF XF 480 construction materials dump truck with FASSI F235 loading crane * DAF XF 480 Space Cab * TraXon automatic transmission, 12-speed * ZF Intarder * Wheelbase: 4,800 mm * Leaf/air suspension * Steerable and liftable trailing axle * Ringfeder trailer coupling * Disc brakes all around * Tires: * Front axle: 385/65 R22.5 * Rear axle: 315/80 R22.5 * Trailing axle: 385/65 R22.5 Equipment: * LED headlights * Fog lights * Air-sprung Luxury-Air driver's seat * Seat heating * Refrigerator * Two sleeping berths * Electric sunroof * DAF infotainment system with 10.1" touchscreen * Navigation * DAB+/Bluetooth/USB * ACC adaptive cruise control * AEBS emergency braking assistant * Lane change assistant * Driver Performance Assistant ----Superstructure: construction materials dump body * Loading area: 6,600 x 2,480 x 1,000 mm * Side boards, divided (2 flaps per side) * Side board relief * 30 mm Finnish plywood floor * Central lashing rail * 4 LED work lights * Stainless steel toolbox ----FASSI F235A.2.24 e-dynamic * Lifting moment: 189 kNm (20.9 mt) * Lifting capacity at 12.7 m: 1,345 kg * Double-acting hydraulic cylinders * PROLINK articulated arm system * Electronic overload protection (FX500) * FSC stability control including LMB II * Radio remote control (RCS) * LED work lights Pedpfozm Dmlox Af Sorb * FL system (fast-acting valve) * 2 additional functions We are happy to provide you with further information.

Condition: used, mileage: 18,631 km, power: 110 kW (149.56 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2011, operating hours: 18,631 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, The Mercedes-Benz KAMAG WBH 25 Wiesel transfer vehicle is a specialized, used truck designed for handling semi-trailers. It has a fifth wheel coupling and important features such as air conditioning and a Webasto heater. It was first registered on September 12, 2011. Equipped with an automatic transmission, it is powered by a 4,249 cc diesel engine with an output of 110 kW (150 hp). It meets the emission requirements of the Euro 3 standard and has a yellow environmental sticker. The yellow vehicle has an overall length of 9,300 mm, a width of 2,550 mm and a height of 2,900 mm, while it offers a permissible gross vehicle weight of 18,000 kg. Mileage: 166,139 km Pedpfx Aor Uzm Rjf Serb Operating hours: 18,631 hours Reverse gear not working! For sale only to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 21,100 km, power: 110 kW (149.56 HP), first registration: 12/2014, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2014, operating hours: 21,100 h, construction height: 2,900 mm, Equipment: ABS, 144,688 km Pjdpozrp R Tsfx Af Ssrb 21,100 operating hours The Mercedes-Benz KAMAG WBH 25 Wiesel, first registered in December 2014, is a specialized transfer vehicle for professional logistics and shunting operations. With very low mileage of only 21,100 km, a displacement of 4,249 cm³, and a comfortable automatic transmission, this vehicle offers a particularly attractive option for companies that value efficiency and precision. Equipped with a fifth-wheel coupling, the KAMAG Wiesel is optimally designed for the quick transfer and shunting of semi-trailers. It is particularly well-suited for use in company yards, logistics centers, or large industrial sites, where it can leverage its strengths: rapid shunting, short distances, and efficient processes can significantly simplify the daily workflow. Only 21,100 km – a rare opportunity for professional users: anyone looking for a specialized transfer vehicle with an automatic transmission and fifth-wheel coupling should take a closer look at this KAMAG WBH 25. It is a powerful and versatile specialist that is ready to take on its next task in your fleet. For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: new, mileage: 500 km, power: 367 kW (498.98 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 6x6x6 all-wheel drive with Fassi crane with jib and winch New vehicle with daily registration 07/2024 Long-haulage cab Removable flatbed Can be used as a tractor unit Tatra specifications coming soon Crane: Fassi F545RA2.27 Stability control V7 remote control Jib / auxiliary boom L214, 4-way V20 winch with 60 m cable AWC Front outriggers 5-way outriggers Predjzgzbgopfx Af Seb etc. Further information coming soon.