Used Membrane for sale (285)

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2,5 - 5 bar Laedpfjxzqulsx Afted Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Lodpfx Afsvcqx Djtead Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Year of construction: 1992, condition: used, The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer). Additional title: dialysis Capacity: 3 hl/h remaining alcohol content: approx. original alcohol content: approx. 5 % Length: 3,6 m Laodpfevcqktex Aftod Width: 1,7 m Height: ca. 8,4 m Weight: 900 kg Operation / Control: Control cabinet with operating buttons and touch display Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE Lajdpswa Tqijfx Aftsd After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Year of construction: 2022, condition: like new (used), For sale: a professional Karl Fischer coulometric titrator from the renowned brand Mettler Toledo. This device is from the Compact line and is designed for precise determination of water content in samples, ranging from 1 ppm to 5%. • Model: Compact C30SD • Operating range: o Measurement range: 10 µg – 200 mg of water. o Resolution: 0.1 µg H2O. o Repeatability: 0.3% at >1 mg H2O. • Power supply: 100–240 V / 50–60 Hz • Year of manufacture: 2022 Ledpfx Afoy Tn U Astsad • Additional features: o Color touchscreen with One Click interface (analysis start with a single button). o Automatic recognition of burettes and reagents (SmartSample technology). o Safe handling of chemicals thanks to the Solvent Manager system (automatic reagent exchange without user contact). o Compliance with GLP standards and user management. The device is almost new, in excellent technical and visual condition, and has been regularly maintained. The last qualification was performed in 2024. The set includes: 1. Device: Mettler Toledo C30SD titrator. 2. Original power adapter / complete set of cables. 3. User manual. 4. Additional accessories: o Titration vessel with generating electrode (with or without membrane – please contact us to specify). o Double platinum reference electrode. o Set of tubes and lines for reagent exchange.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 9 t, total length: 3,100 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 750 kg, operating temperature: 200 °C, Equipment: CE marking, documentation/manual, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. Ledpfx Ajiimw Aeftsad We ship worldwide.

Condition: used, Year of construction: 2004, functionality: fully functional, SIPREM INTERNATIONAL PCM 400 Professional continuous pneumatic membrane press for high-volume grape processing. Model: Siprem PCM 400 Type: Continuous Membrane Press Processing Capacity: 32 - 45 Tons/hour (Fresh grapes) Max Capacity: Up to 55 Tons/hour (Fermented grapes) Year: 2004 Weight: 13,000 kg Condition: Excellent industrial condition, fully Lsdpfjy R I Drox Aftead operational. Key Advantage: Unlike batch presses, this system allows for uninterrupted 24/7 grape processing with high-quality must extraction.

Year of construction: 2006, condition: used, Technical specifications: Type: P2M L 24/09 Year of manufacture: 2006 Serial number: 94600105 Voltage: 400 V Frequency: 50 Hz Ledpfx Aeg Ty Twsftoad Power consumption: 53 kW Current: 81 A Weight: 8150 kg Machine dimensions: Machine width: 410 cm Machine length: 160 cm Machine height: 330 cm Control cabinet dimensions: Control cabinet width: 100 cm Control cabinet length: 50 cm Control cabinet height: 160 cm

Condition: used, This listing is for 1 of 7 Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Lsdpfx Ajxhdx Doftsad Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: used, Year of construction: 1983, - Closed press drum, steel, coated - Tank capacity: 30 hl - Last used: Harvest 2025 - Membrane: PVC, year 2018 - Juice pan: large stainless steel pan, "drawer with suspension" version, connection DIN - DN50 - Central filling - Without feet, with wheels - Machine in operational condition Dimensions: Ljdpfoy Nmc Dox Aftoad - Length: 4500 mm - Width: 1900 mm - Height: 1600 mm (without wheels)

Condition: used, Year of construction: 2005, Item: AD-3877-RO-Line Used Reverse Osmosis unit with Membrane filter Laedpfowbg Tmex Afted year of production: 2005.

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. Lasdpfx Afoxhfpkstsd External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical Lajdey Iw Etepfx Afted - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum type by KEMPER. Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation, suitable for high-concentration welding fumes and dust filtration. Appropriate for all welding methods with carbon steel, low-alloy and high-alloy steel, as well as aluminium. Cost-effective operation thanks to the long service life of the filter cartridge. Due to IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Specifications: Airflow capacity: 1,100 m³/h Maximum negative pressure: 3,200 Pa Three-phase fan motor: 1.5 kW Ledstq E Sispfx Aftsad Filter surface area: 15 m² Year of manufacture: 12/2023 Cartridge filter element with PTFE membrane Filtration efficiency: > 99.97% Built-in delay time controller for start-stop operation. With the optional start-stop sensor connected, the extraction delay after welding can be set between 5 to 60 seconds. Stock no.: 1071

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Ks Kesmak KME 350 Shaft cutting diameter: 350 mm Square: 340 x 340 mm Rectangle: 340 x 415 mm Hydraulic control of the bandsaw arm Hydraulic control of the vise Hydraulic blade tension sensor Laedpfx Asy H Rbfofted PLC controller Mechanical feed with rollers in the vise Electronic setting of cut part length and quantity Feed cycle up to 6000 mm, any length and quantity Membrane control panel Bundle cutting possible (upper clamp) Stepless blade speed adjustment: 20-120 m/min Roller feeder 1200 mm Documentation Year 2024

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Laedpfstq Hkrjx Aftjd Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: refurbished (used), functionality: fully functional, pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 60 l, Equipment: type plate available, The Symex CML 500 is a high-performance vacuum homogenizer mixer designed for producing demanding products in the pharmaceutical and cosmetics industries. This system combines mixing, dispersing, homogenizing, heating, cooling, and vacuum processing in a closed unit, enabling precise and reproducible production—from pilot scale to industrial applications. Such systems are specifically engineered for complex processes with stringent quality requirements. Technical Highlights of the Symex CML 500: Tank - Usable volume: approx. 500 liters - Total volume: approx. 780 liters - Minimum volume: approx. 125–160 liters - Product space pressure range: -1 / +2 bar - Product temperature: up to approx. 133 °C - Heating jacket: up to +4 bar / 151 °C - Design in accordance with AD 2000 - The tank is fully pressure and vacuum-resistant, ensuring safe operations under demanding conditions. Agitator - Anchor agitator with flow breakers - Speed range: approx. 11–66 rpm - Power: approx. 7.5 kW - Frequency-controlled - Designed for highly viscous products - The agitator provides uniform mixing and optimal heat transfer. Homogenizer - Power: approx. 16–20 kW - Speed: up to approx. 3,000 rpm - High shear performance for fine dispersion - Rotor/stator system - The homogenizer ensures stable emulsions and reproducible product quality. Vacuum System - Operation under vacuum possible - Liquid ring vacuum pump (external) - Pressure and vacuum monitoring - Vacuum operation significantly reduces air entrainment and improves product quality. Heating & Cooling - Double-walled vessel (2-zone heating) - Precise temperature control - Even heat distribution - CIP system Multiple CIP Connections - Rotating spray heads (360°) - Cleaning of the entire process chamber, including pipelines Material Feed - Direct suction of liquids and powders - Feed into the homogenizer area - Fast and low-loss processing - These integrated feeding and circulation systems enable highly efficient process management. Additional Equipment - Hydraulic lid lifting device - Multi-nozzle with several connection options - Sight glass with double wiper - Vessel lighting - Dosing vessel (approx. 8 liters) - Sampling valve - Membrane and disc valves - Circulation piping for homogenization and CIP Control & Operation The system features a modern operation concept: - Touch panel control - Adjustable speed and cycle times - Process monitoring (pressure, temperature, speed) - Automatic and manual operating modes - Alarm and safety functions Advantages of the Symex CML 500 - Combination of all process steps in one unit - High process reliability through enclosed design - Reproducible and stable product quality - Suitable for highly viscous and sensitive products - Hygienic design (GMP-compliant) - Flexible application for different batch sizes Delivery & Handling Ljdpfx Ajy Hq I Seftoad - Delivery ex works - Turn-key project available (incl. commissioning) - International shipping possible

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Lasdpfx Afofg E H Ujtsd Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: Laedpfefg E H Sjx Afted New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, Year of construction: 2020, functionality: fully functional, New: A brand-new, unused, unopened, undamaged item in its original packaging, 8m cable. YASKAWA ELECTRIC JZRCR-APP01-1 / JZRCRAPP011 (BRAND NEW) TEACH PENDANT, TOUCH SCREEN, KEYPAD MEMBRANE NOT INCLUDED/ORDERED SEPARATELY, MEMBRANE OPTIONS AKS-000E/AKS-001E/AKS-002E/AKS-005E, SD CARD SLOT, 3 POSITION ENABLE SWITCH, USB CONNECTION Lasdpfx Aoy D Hvtoftsd

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press Lasdpfsg Uk Eisx Aftsd 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Year of construction: 2017, condition: ready for operation (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well. Lasdpfx Ajy D D Rhsfted

Condition: used, This listing is for a QuattroFLow QF15SU-U Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF15SU-U is a specialized 4-piston diaphragm pump designed for single-use in biopharmaceutical applications. Its features and applications make it particularly advantageous for handling delicate fluids. Here’s a closer look: Key Features: Single-Use Pump Chamber: Constructed from plastic, this design significantly reduces contamination risks and the need for cleaning between uses. 4-Piston Diaphragm Design: Ensures smooth and consistent flow, critical for sensitive applications. Self-Priming Capability: Can operate without priming, enhancing operational convenience, especially in processes where fluid levels fluctuate. Dry Running Capability: The pump can run dry without damage, providing flexibility in various operating conditions. No Rotating Parts: This design feature prevents heat generation and eliminates the risk of particle shedding, ensuring that the product remains uncontaminated and stable. Laodpjxxz Idsfx Afted Gentle Fluid Transfer: Designed to facilitate the safe and secure transfer of fluids, ideal for sensitive biological products. Applications: Biopharmaceutical Applications: Perfect for pumping aqueous solutions and biological products, especially those sensitive to shear forces, like proteins and enzymes. Research and Production Facilities: Suitable for use in laboratory or pilot plant environments, where precision and reliability are paramount. Re circulation of Feed/Retentate: Effective for processes involving membrane cassettes, hollow fibre, spiral wound, or ceramic filtration elements. Feed Pump for Filters: Works well as a feed pump for filter cartridges or plate and frame depth filters, ensuring optimal flow rates and minimal shear. Summary:

Year of construction: 2021, operating hours: 2 h, condition: new, functionality: fully functional, machine/vehicle number: 211 02 24, We offer the following for sale: For sale: GLOBAL Vacuum Presses GGTP-P-3116 Professional membrane vacuum press in excellent, like-new condition. The machine has only been used once and is virtually brand new. This equipment is an ideal choice for furniture manufacturing and woodworking applications: perfect for foil lamination, veneering, and precision pressing of curved and flat surfaces. It features a robust design, reliable operation, and uniform pressure distribution. Key features: - Model: GGTP-P-3116 Professional - Working area: approx. 3100 × 1600 mm Laedpey Dhr Nofx Aftjd - Membrane vacuum technology for precise and even pressing - Suitable for applying PVC foil, veneer, and other coatings - Sturdy, industrial-grade construction - Easy to operate Serial number: 2110224 Weight: 640 kg Year of manufacture: 2021 Pressure: 9.9 T/m² Power: 1.5 kW Frequency: 50 Hz Phases/Voltage: 3+N / 380 V Current consumption: 2.2 A If you have any questions or require further information, please send us a message or call us. The machine is ready for immediate use, in as-new condition, and can be tested on site.

Condition: good (used), Year of construction: 1997, Manufacturer: MAWItec Maschinenbau | Model: Turnstar III | Serial Number: 1012 | Year of Manufacture: 1997 | Control: MAWItec CNC (integrated operator panel with screen and membrane keypad) | Operating Voltage: 400 V | Frequency: 50 Hz | Design: Enclosed production lathe | Headstock with automatic clamping system | Fully enclosed working area | Integrated coolant system | Dimensions: approx. 2000 mm x 3550 mm x 1900 mm (HxLxW) | The stated dimensions are approximate values. All other information provided without guarantee. | Red/Grey | Steel Lasdpfsyib A Usx Aftjd