Used 3 Achs Tridemtieflader- Anhänger for sale (77,067)

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, color: orange, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Guodsi Rixgopfx Abmsc Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front Godox Rq Sljpfx Abmsuc 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Gsdpfxoy Efcuj Abmsuc Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: used, machine/vehicle number: WFDFLT33902030053, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,540 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis - Tipper Semi-Trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Patent-protected curved front end 24 t 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser measured" - reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift function, including forced lowering and traction assistance, activated by "brake 3 times" (traction assist is operational up to a 30% axle load exceedance and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking System 2-line compressed air braking system Spring actuated parking brake 2 front interchangeable coupling heads, without connecting hose EBS - Electronic Braking System with EBS socket at front, without connection cable Attention: This trailer may only be towed by tractor units that ensure full ABS functionality! Godjy Edtfopfx Abmsuc With lift & lower valve Vehicle - Driving Stability System Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrical System 24 Volt, multi-chamber lights, LED side marker lights (amber) 2 x 7-pin interchangeable sockets at the front, without connection cable, electrics not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box body made of high-quality, wear-resistant material. Sloped bulkhead, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precision-welded, with upper rail profile for protection against bulk cargo. Interior access on the front wall (not in combination with Cramaro cover). Shovel and broom holder on front wall exterior. Greenline - conical and aerodynamic body design "Membrane" tailgate Rear wall suspended with "double hinge" and split 1/2 to 1/2 two-wing door, swing arm on top, with one grain slide per door. Floor plate continuous, 6 mm thick Standing platform with access, connector plate for air/electricity and brakes, with spacious area for maximum operability. Roll tarp can be opened to the right (FR-right) and locked on the left (FR-left) with central locking. Operational Notices For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible. Depending on the type of load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive materials (e.g. acids, chlorine compounds, sulfur compounds, "refuse-derived fuels"); such substances can cause stress corrosion cracking on damp body surfaces, potentially resulting in severe fracturing of the body structure. Vehicles with loading bodies are designed for non-chemically aggressive loads. Transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at your own risk. This may lead to stress cracks or pitting corrosion damage. The images shown are archive photos. The vehicle may still be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Godpfx Aboyylapomouc Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802032235, empty load weight: 4,983 kg, maximum load weight: 33,017 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2022, suspension: air, tire size: 385/55 R22.5", color: light green, Attention: The images are archive images! The vehicle may still be in use! Gedpfx Asww Iczebmeuc Chassis: Saddle, container Fine-grained steel welded construction, saddle plate with replaceable 2" kingpin and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, rear-flush locking positions, new design for better saddle pressure with 20" rear-flush, rear lighting protected and recessed in the rear Center telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Center telescope, 1st stage, rear extension extended, 1st stage: 1 x 40 ft with gooseneck tunnel Center telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and overloaded towards the rear Center telescope, 2nd stage, front extension extended, 1st stage, rear extension extended, 2nd stage: 1 x 45 ft with long gooseneck tunnel and angled corners, center telescope as an interlocking central frame with pin locking The transport of filled tank containers is not permitted. With height adjustment at the rear, in "hot-dip galvanized" version, and folding center supports for containers without tunnels Front container guide, pluggable Front crossbeam with current Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45" containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without extension equalization 2 support wedges with holder Aluminum side impact protection Steel under-run protection, galvanized Extendable under-run protection for 45 ft containers Splash flaps at the rear over the entire width (not in conjunction with forklift holder) Half-shell fenders With anti-spray splash flaps according to EC standards Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fastening kit 1 storage box for fire extinguishers up to 6 kg 1 fire extinguisher (ABC powder 6 kg)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, loading space length: 13,650 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,638 mm, suspension: air, tire size: 235/75 R17,5", color: silver, The images are archive images! The vehicle may be in use! Chassis: Semi-trailer for transport companies Fine-grain steel welded construction, kingpin plate with interchangeable 2" kingpin Suitable for transporting construction/agricultural machinery up to a maximum gross weight of 24,000 kg and with a maximum width of 2,480 mm (however, the track width of the construction/agricultural machinery or vehicles to be transported must not exceed 2,200 mm). Mounting rail for aluminum ramps at the rear (wider construction/agricultural machinery must not be loaded). Outer frame slightly angled, new design with "Load-Lock" profile for securing lashing straps. 14 pairs of lashing points recessed into the outer frame, 2.5 tons each. 6 pairs of lashing points recessed into the outer frame, 5 tons each. 24-ton, 2-speed support jacks, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1920 mm. Foldable rear support. 2 x chock blocks with holder. Aluminum side impact protection. Steel underride protection. Quarter panel fenders in front of and behind each axle. With anti-splash flaps behind each axle. 1 x spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 x spare wheel, same manufacturer as the standard tires, steel rim. Axles + Suspension SAF drum brake axles. "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, additionally electrically operated from the truck, including forced lowering and start-up assist, without truck installation (the start-up assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Braking System Gujdpfx Abexb D Swemoc 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (this requires the truck to have the necessary capabilities. Only for standard tires). Wheels and Tires 235/75 R17.5 twin tires. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. Yellow LED lighting on the sides linked to the turn signal ("flashing side marker lights"). 2 white position lights at the front in LED. 2 white/red outline lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle loads up to a maximum of 5,600 kg. Front Wall / Corner Posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a robust design. Front wall additionally covered with sieve plate, 1250 mm high. Frame hot-dip galvanized. The images are archive images! The vehicle may be in use!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, suspension: air, tire size: 385/65 R22,5", color: red, Please note that the images are archive images! The vehicle may be in use! Tarp color can be freely selected. Chassis: Semi-trailer chassis Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing points additionally integrated into the outer frame, each 2.5 tons 14 pairs of lashing points additionally integrated into the outer frame, each 2.5 tons 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, with stroke compensation Manufacturer: SAF Note: Free support leg angle or free rear swivel radius approx. 1930 mm Extension ladder at the rear Door latch on the side 2 shims with holder Aluminum side impact protection Painted in RAL 3002 carmine red No liability/paint guarantee for overpainted coated components. Rear underrun protection, steel, galvanized Painted in RAL 9010 pure white, also the underrun protection holder No liability/paint guarantee for overpainted coated components. Quarter panel fenders in front of and behind the axle group With anti-spray flaps according to EC Rear impact protection 1 aluminum ladder approx. 2,550 mm, with holder on the side, behind the side impact protection Attachment rail on the outer frame for attaching tarp tensioners, in a bolted design approx. 15-20 mm above the loading area, with a hole profile at the top for lashing strap attachment, the Load Lock outer frame must be usable (as there are no lashing points). Can be used in conjunction with an aluminum insertion strip at the bottom as a stop! (not in conjunction with sideboards) 2 plastic toolboxes, w=800/h=450/d=450 mm 1 each on the left and right front, behind the 3rd axle Axles + Suspension BPW disc brake axles with 430 mm disc diameter Hubs painted in RAL 3002 carmine red "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line 24 Volt EBS, manufacturer Wabco, Electronic Braking System with EBS socket at the front, without connection cable Caution: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! With lift and lower valve + auto-reset function Vehicle - Driving Stability System Guodpfsxbzkkox Abmec Telematics, including LIN battery, coupling sensor and tracking (without contract, this must be concluded by the customer). Wheels and tires 385/65 R22.5", manufacturer's choice Polished aluminum rim, manufacturer Alcoa Dura-Bright Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Light carrier painted in RAL 9010 pure white No liability/paint guarantee for overpainted coated components. 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable LED work lights on the side (switched via reversing light) Positioned at the height of the first crossmember behind the support legs 2 additional LED work lights at the rear, switched via reversing light Tarp Tarp with welded-in horizontal and vertical straps Customer lettering on the rear portal, tarp color can be freely selected.

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Surcharges: last axle as steering axle: €3,500; warning signs + lighting and beacon: €200; widening to 3m with wooden planks: €300; hydraulic ramp shift: €1,000. Also available with K80 towing eye! -- Errors, omissions and changes excepted, sample images -- More data at: !, More Details: ! Gujdpfx Aey U Hzwebmjc

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Gusdpfxovvi Scs Abmsc

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202038273, empty load weight: 5,680 kg, maximum load weight: 29,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 2,680 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: silver, Chassis, semi-trailer, logistics company Fine-grained steel welded construction in reinforced Scandic design, kingpin plate with replaceable 2" kingpin Outer frame in low-bed design: 7 pairs of lashing points embedded in the top and side of the outer frame, each with a capacity of 10 tons 10 pairs of combination pocket lashing points with ring lashing eyes (bolted) embedded in the outer frame, each with a capacity of 5 tons, approx. 72 x 42 mm internal dimensions Outer frame with "Load-Lock profile" for securing lashing straps, with a hole approximately every 400 mm 24 ton, 2-speed landing gear, single-side operation Free swivel radius to the support foot approx. 2500 mm, support foot dimension approx. 2600 mm, extendable ladder at the rear 2 chock blocks with holder Aluminum side impact protection Steel under-run protection, galvanized Spray guard at the rear, covering the entire width Quarter panel fenders in front of and behind the axle assembly with anti-spray splash guards, only on the last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of the axles, 1x on the left and 1x on the right 1 storage box across the entire width, closed, below the loading area, approx. w=450 mm/h=400 mm/d=2460 mm mounted directly in front of the axles 3 lashing/stanchion rails with 4 pairs of locking cutouts embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 1782 mm), approx. 80 mm high. With cutouts at the top and bottom for lashing and inserting stanchions 80 x 80 mm. At the bottom, an angled sheet is used as a stop, open to halfway down. Combined design for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters 10 combination stanchions with cutouts at the bottom, w=80/ d=50/ l=1200 mm 6 stanchions, w=80/ d=80/ l=1200 mm, hot-dip galvanized Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting assistance Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front 24 Volt EBS, electronic brake system with EBS socket at the front Caution: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab Wheels and tires 385/65 R22.5" Steel rims "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS Electrical system Gjdpfszbbpuex Abmsuc 24 Volt, multi-chamber lights, yellow LED lighting on the side yellow LED lighting on the side, linked to the turn signal "flashing side marker lights" 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 2 additional LED work lights at the rear 1 LED roof marker light with holder 2 pairs of warning signs, LED illuminated and extendable to 3,000 mm 2 additional LED work lights at the top of the front panel additional 7-pin socket in the under-run protection at the rear Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 7,900 kg "Premium floor sealing" Floor sealed around the entire perimeter F

Condition: new, axle configuration: 3 axles, loading space length: 13,510 mm, loading space width: 24,500 mm, suspension: air, tire size: 385/65-22,5, color: black, Equipment: ABS, = Additional Options and Accessories = - EBS - LED lighting - Air suspension - Disc brakes - Toolbox = Notes = Internal number for customer inquiries: 5-143 Available immediately!!! PAVIC semi-trailer, timber transport platform with hardwood flooring, 43 tons technically permissible total weight, 13,500 mm loading length. Equipped with a quick-change pocket system. Only the bolster is pulled out; the technology is housed in the pocket. Your advantage: standard bolster with low weight at moderate prices. AVAILABLE IMMEDIATELY! * Chassis length approx. 13510 mm (head frame - head frame) * Chassis width approx. 2540 mm (outer frame - outer frame) * Unladen ride height approx. 1400 mm at a kingpin height of 1200 mm * Kingpin load max. approx. 16000 kg * Front overhang (kingpin to front edge of chassis) 1550 mm * Kingpin 2" according to SAE standard, replaceable from below * E-wheel holder for 1 E-wheel * Front wall approx. 2500 mm high, corners angled with sheet metal cladding * Steel floor with 4/6 mm diamond plate covering * Outer frame with rounded edges and holes for load securing approx. every 500 mm * Axle lift for the first axle, automatic function, with starting assist * 3x 9t axles, optional with disc or drum brakes * Axle spacing approx. 1310/1310 mm * Brand-name tires 385/65 R 22.5 * EBS braking system with Roll Stability Program * Smartboard/TIM/Infocenter, in addition to the H+S valve * LED lighting system * LED work lights * 2x plastic toolbox * Pallet box or, optionally, 2x long aluminum storage boxes, custom-made by Pavic (see pictures) * With OPIPA AL10 aluminum bolsters (also available without bolsters upon request) Alternatively, also available with a steel floor instead of a hardwood floor (weight difference: steel floor +650 kg) Financing possible through our financing partners. Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. Gjdpfxjzba Eue Abmouc = Additional Information = Tire size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle GVWR: 40,000 kg Body brand: PAVIC short timber platform, quick-change system General condition: very good Technical condition: very good Optical condition: very good

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902036248, empty load weight: 7,272 kg, maximum load weight: 27,728 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Container color: solid color, RAL color freely selectable Chassis: semi-trailer, for forwarding companies Fine-grained steel welded construction in lightweight design, up to the support legs, trailer plate with replaceable 2" kingpin 24 tons, 2-speed support winch, single-sided operation Extension ladder at the rear Door latch on the side Folding mudguard for lighting unit Rear impact protection 1 aluminum ladder approx. 3,550 mm, with holder on the side 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, activated by "3x braking" Braking system 2-line compressed air braking system Spring brake parking brake 2 tamper-proof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS 1 additional air connection on the left rear, with quick-release coupling Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal ("flashing side marker lights") 2 white position lights at the front in LED 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Self-tipping hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics. Switching between forward/reverse operation is done electrically via remote control with cable Operation hydraulically via truck PTO Hydraulic connection with hose on the front wall and HDK screw connection NW = 48 mm Self-tipping floor Sliding floor with wear plate at the rear Floorboards made of aluminum, 8 mm floor profile, ribbed design Self-tipping container Guodpfx Ajza S E Robmoc Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded all around at the top with a wide special reinforcing profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a 1/2 to 1/2 split, framed all around with a special U-profile with stop and rubber seal, with 2 swivel latch bars on the outside, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left in the direction of travel Standing platform with ladder on both sides in the direction of travel left/right and railing, for opening and closing the roof tarpaulin 3 removable, swiveling crossbars for tarpaulin support + tarpaulin support at the front on the front wall and at the rear on the rear wall Paint finish Frame DB 7350 Novagrau "10-year warranty against rust through" Support legs Black coated Container Aluminum natural - can be painted in RAL color according to customer's request Roof tarpaulin Not yet

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014072, empty load weight: 7,300 kg, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,530 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,330 mm, suspension: air, tire size: 385/65 R 22,5", tire condition: 100 %, color: silver, Chassis, semi-trailer, transport company Fine-grained steel, welded lightweight construction, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 tons, with center of gravity at 3 m loading length in the retracted state. 13 pairs of hooks for lashing straps, welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. 24-ton, 2-speed support winch in reinforced design for loading and unloading, single-sided operation. 1 spare wheel holder for 1 spare wheel. 1 storage compartment for stowage, open, with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm. 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm, with reinforcing beam, installed between the outer stake pockets, except for one. 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, half open downwards. For lashing and inserting stakes 80 x 80 mm. Pull-out ladder at the rear on the right side. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm, including reinforcing beams. 10 "lightweight" stake sockets, B=80/ T=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. 2 plastic toolboxes, b=600 / h=425 / t=460 mm, lockable. Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm. Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the left side in front of the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm, with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob. Axle spacing offset 1310/1410 mm. Air suspension. 1st axle automatic lift axle, also electrically operated from the truck, with start-up assistance. Braking system 2-line compressed air braking system. Spring brake parking brake. 2 non-interchangeable coupling heads at the front. EBS Wabco, electronic braking system with EBS socket at the front. With raising & lowering valve + auto-reset function. Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately pre-equipped. Wheels and tires 385/65 R 22.5" steel rims. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front in LED. 2 white/red side marker lights at the rear in LED. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front. 1 rotating beacon with bracket, switched via side light. 2 pairs of warning signs, LED illuminated and extendable to 3,500 mm. Flashing side marker lights. Side 7-pin sockets, positioning 2x front panel, 2x support legs, 2x rear end. Gjdpfxsza Dyyo Abmsuc 1 additional 7-pin socket, in the underrun protection at the rear. 2 additional LED work lights, top inside on the fron

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations Gedeza A Txjpfx Abmouc 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Gjdjza Anvjpfx Abmsuc Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Gusdeza Aiyspfx Abmec Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h Gujdsza Agrspfx Abmec

Condition: used, first registration: 08/2004, Year of construction: 2004, Krone SDK 27 ∗3-axle∗MEGA ∗Box semi-trailer∗ ● 3 X BPW axles ● Air suspension ● Lift axle ● Lifting/lowering system ● Disc brakes ● ABS ● 36,000 kg GVWR (39,000 kg technically possible) ● Unladen weight: 8,800 kg ● Storage box on the right ● Rear portal doors ● Box interior dimensions (LxWxH): 13,640 x 2,490 x 2,850 mm ● 98 m³ volume ● Steel rims ● Tires: 445/45 R19.5 ● Tire tread: 5/3 / 9/4/ 7/8 mm - German semi-trailer - First owner - MOT/TÜV/Inspection: NEW! Errors and prior sale excepted! Gsdpfxsx Ndp Uo Abmeuc = Further information = Reserved: This vehicle is reserved for a customer (subject to sale). Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: new, empty load weight: 7,320 kg, maximum load weight: 22,680 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Gujdpfjy Uam Hex Abmjc

Condition: new, empty load weight: 7,300 kg, maximum load weight: 26,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, anti-slip strip on the outside of the ramps and rear slope, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators, Surcharges for: last axle as steering axle: €3,500, warning signs + lighting and beacon: €200, widening to 3 m with timber inserts: €300, hydraulic ramp shifting: €1,000, -- Errors, misprints and changes excepted, sample images --, More data under: !, More Details: ! Gujdoy Uak Espfx Abmoc

Condition: used, maximum load weight: 28,020 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 06/2028, Year of construction: 2018, Internal vehicle number: VTC30021 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany. More information can be found at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: VTC * Purchase price: 35,900.00 EUR * Down payment: 10% * Term: 60 * Monthly installment: 560.02 EUR * Residual value: 6,380.00 EUR Guedjywqlfspfx Abmec If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as part payment. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 147,548 km, power: 353 kW (479.95 HP), first registration: 11/2016, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, Internal vehicle number: VTC30008 German vehicle Located at our yard in Kaufungen - Kassel, Germany, available immediately More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions – 7300 x 2500 [mm] Errors excepted We gladly accept your used vehicle as a trade-in. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH Gujdeyrzlwspfx Abmjc We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 33,060 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2020, next inspection (TÜV): 06/2028, Year of construction: 2020, Equipment: ABS, Internal vehicle number: MK200169 Gusdpfxex S Tkto Abmsc German vehicle Available immediately at our premises in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors excepted We are happy to trade in your used vehicle. Financing available directly through our company. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 28,800 kg, overall weight: 33,400 kg, axle configuration: 3 axles, first registration: 08/2019, next inspection (TÜV): 06/2028, Year of construction: 2019, Internal vehicle no.: MK300002 Godpfx Abex Txu Homjuc Internal vehicle no.: G300168 German vehicle Available immediately at our premises in Kaufungen - Kassel For more information, please contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: MK300002 * Purchase price: €44,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €703.24 * Final installment: €8,980.00 If you are interested in this offer or wish to customize it to your requirements, please contact us (Mr. Enchev). We look forward to your inquiry. Errors and omissions excepted. We are happy to accept your used vehicle as a trade-in. In-house financing available. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.