Used Zopf T 1000 for sale (75,276)

Condition: used, Year of construction: 1986, used, top condition cleaned, function checked, test run, manufactured by Hapfo type AP 1000 built in 1986 Lasdpfovwf D Djx Alboh mach.-No. 44 top width ca.1000 mm top height ca. 200 mm 6-Zackmitnehmer live centre motor 0.75 PS revs 750 - 1500 - 3000 required space ca. l x w x h mm 1600 x 600 x 1400 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. Laodpfsw Avptsx Albeh New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Table: 1000 x 1000 mm Ljdpfxowffz Dj Albsah Height: 1000 mm Weight: approx. 650 kg In good condition.

Condition: like new (used), mileage: 91,000 km, fuel type: diesel, Year of construction: 2023, FIAT DUCATO, 2023, L2H2, total length 5.40 meters, 91,000 km, 2.2 MJT engine with 140 hp, single owner, new tires, serviced, air conditioning, steering wheel controls, rear-view camera, 1-year warranty. Financing or leasing options available. Laedpfx Alsz H Nz Eeboh

Condition: new, Year of construction: 2026, Capacity: 11,000 m³/h Motor power: 11 kW Voltage: 3-phase / 380 V Net/gross weight: 1000 / 1100 kg Dimensions (L x W x H): 3661 x 1160 x 3063 mm Material: Galvanized steel sheet, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 40 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2800 - 3100 Pa Filtration area: 60 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted to work in environments Explosive dust in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient operation in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate Ledozx A Ryopfx Alboah The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: new, Empty weight: 75.000 kg Dimensions (LxBxH): 825 x 825 x 2084 cm Cargo space capacity: 740.000 l Wall thickness: 8 mm Aerial platform: Yes Thickness of end walls: 6 mm Thickness of partition walls: 5 Number of fillers: 2 SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT Lsdpfx Aloylhc Aebjah SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Lajdpjy Evltefx Albeh

Condition: excellent (used), 11 kW engine. Belt width: 100 cm. Laodsy Tg Sgspfx Albeh

Condition: used, empty load weight: 3,100 kg, maximum load weight: 6,900 kg, overall weight: 10,000 kg, first registration: 09/2006, next inspection (TÜV): 10/2027, suspension: steel, color: red, Year of construction: 2006, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, * German trailer, second-hand * Vehicle ID number: WMM0000060049937 * New vehicle inspection / valid until 10/2027 Technical data: * Overall length 8300mm * Overall width 2550mm * Permissible total weight 9990 kg * Technically permissible total weight 11000 kg * Unladen weight 3100 kg * Payload 6890 kg * Length of loading area 6000mm * Width of loading area 2450mm * Loading height 900mm Delivery throughout Germany possible!!! Trade-in possible!!! Leasing and financing possible, even without a down payment. Lsdpfx Aoz Sc R Hslbeah Errors, printing errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, mileage: 622,000 km, power: 308.91 kW (420.00 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 73,000 mm, Year of construction: 2018, Euro 6 compliant Valid TÜV (technical inspection) until 09/2026 Thermo-King T-1000R Tandem trailer with a maximum permissible weight of 18 tons available at an extra cost Trailer: €7,900 net Laedpfx Aljy Urcyobsh Technically sound and ready for operation.

Condition: new, Siemens 1FT5066-0AF71-1-Z servo motor SN: YFWD13232301001 with ROD 320 encoder and IP67 housing, unused in opened original packaging, 100% functional, scope of delivery as per photos, Z see type plate Laodsm Nx Ntopfx Albeh

Condition: excellent (used), Riggs twin depositor system, 2 separate depositors with large hopper. Lovely condition, perfect for filling sauces into ready meals etc. Lajdpsm Sg H Defx Albeh

Condition: new, Siemens 1FT5064-0AF71-1-Z Motor SN: YFT834937501001 with ROD 320 encoder, unused, 100% functional, scope of delivery as per photos, Z see type plate Laodpfx Aljm Itgyobjh

Condition: used, mileage: 1,001 km, first registration: 07/1964, empty load weight: 1,100 kg, tire size: 10.5-20 10PR, color: red, driver cabin: other, gearing type: other, total length: 4,000 mm, total width: 1,970 mm, total height: 2,440 mm, Vehicle location: Bovenden, 1 axle, doors Superstructure: TSA-8, portable pump trailer Lajdpfx Alolrvq Eobsh Chassis: Industriewerke Karlsruhe (IWK) First registration: 07/01/1964 Manufacturer: Albert Ziegler - Fire Extinguishing Equipment Factory (Giengen a.d. Brenz) Type: TSA - 8 Height-adjustable drawbar, doors at the front and rear, roof rack Suitable vehicle: KLOECKNER-H-DEUTZ Jupiter 178 D 15 A, 6x6 -902599- ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Lsdpfxjqmvlro Albsah Crown angle adjustment knife sharpened operation manual Weight: approx. 1400 kg

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Leder Igtyspfx Albjah Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lajdpfx Aeh Un Hajlbeh Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside Ledpfx Aljib H Ddoboah (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Lajdpfx Aeid Szvjlbjh Foot pedal remote control available at an additional cost of €390.

Year of construction: 1996, condition: ready for operation (used), Max grinding width 1000mm Ljdpjihaz Ujfx Albsah Single aggregate 15 kW engine electric table lift

Year of construction: 2023, condition: new, Machine equipped with complete formworks (rotating hade, 5 steel rings, outer formwork) for pipe with diameters: Dint=1000mm si Dint=800mm; - The equipment can manufacture unreinforced concrete pipes with connection sockets: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum height of pipe: 1000mm; minimum height of pipe: 250mm - Vertical translation of the rotating head – electric engine - Variable revolution of the rotating head (frequency converter) - Sizes: 2.0x2.0x4.2 meters - Mass≈2000 kilograms - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes Lajdsiy Dl Hjpfx Albjh - Loading of the machine with concrete: manual; (optional – by conveyor belt) - Manipulating the formwork with the concrete pipe inside: with the forklift; - Recovery of the formwork: immediately. - Recovery of the ring: after 2-3 days, depending on the ambient temperature. - The frequency converter allows adjustment of speed according to the inside diameter of the pipe. - Changing the rotating head is simple and fast. - Rotating heads are lined with interchangeable wear resistant steel sheets. EQUIPMENT REQUIRED: - MX500L Concrete Mixer with aggregate loader: concrete preparation - Conveyor: transport of concrete from the mixer to the formwork. Steel rings for the lower plug - The production surface must be perfectly flat!

Condition: ready for operation (used), Bosch SE-B2.040.060-00.003 Brushless servo motor with Heidenhain ROD 426.014 1000.222 651 23 rotary encoder, hole spacing of mounting holes: 81 x 81 mm, drive shaft diameter: 14 mm, used, in good condition, 100% functional. Laodpfx Alei D Hd Djbeh

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. We offer a full range of accessories to suit your requirements and application. With body material available in painted mild steel or stainless steel. Ljdpfx Alsgq N Axjbeah The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Year of construction: 2025, condition: new, A workshop cabin washer made of stainless steel AISI 304 and acid-resistant AISI 316, designed for professional use in a broad range of industries and automotive applications. It operates in a closed-loop system at temperatures up to 45°C. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, in combination with the optimal temperature and pressure from the spray gun nozzle, easily removes all types of dirt. Standard equipment includes a compressed air gun and a low-pressure overflow brush. The washer is equipped with a 90-liter tank, a pneumatically lifted washing chamber, and adjustable height for user convenience. STANDARD EQUIPMENT: - High-pressure nozzle up to 140 bar - Low-pressure brush with 5 L/min flow rate Lodjgvaazopfx Alboah - Compressed air gun up to 8 bar - Heated 90-liter fluid tank - LED lighting - Air blower for viewing window - Pneumatic chamber opening mechanism - Sensors for liquid level and temperature - Dual liquid filtration system - Integrated oil separator (effectively separates oil contamination from the water in the washer tank) - Dual foot-operated switches - Adjustable height feet with a range of up to 100 mm - Entirely made of stainless steel - Safety rating: IP 54 - XPOWER Active Cleaner fluid, 5L (two types available) OPTIONAL ADD-ONS FOR THE MASTER CLEANER MC1000: - Spray arm - Rotating basket - Rotary nozzle - Manifold cleaning nozzle - Tank insulation TECHNICAL SPECIFICATIONS: - External dimensions with open chamber (cm): 125 x 85 x 235 - External dimensions with closed chamber (cm): 125 x 85 x 170 - Chamber dimensions (cm): 100 x 64 x 74 - Power supply: 3 x 400 V - Pneumatic system pressure: 6 - 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Fluid operating temperature: up to 45°C - Air connection: pneumatic quick coupling DN 7.2 plug - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 DIFFERENT MACHINE VARIANTS AVAILABLE CONTACT US TO LEARN MORE ABOUT THE OTHER MODELS.

Condition: used, Inductive sensor, electronic sensor, position encoder, displacement sensor Lajdpfsf E Rqcox Albsh -Manufacturer: MTS Temposonics, position encoder -Type: TTM-RB-M-1000-R -Measuring length: 1000 mm -Dimensions: 1200/53/H46 mm -Weight: 0.8 kg