Used Zeiss New Rubber Friction Wheel for sale (36,750)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA Gjdpfx Absyug R Remouc • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: ready for operation (used), Joystick box for Zeiss C99 controllers Box without speed override €750,-- Guodpfx Abofh Dpmjmjc

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Gedpfsyl S S Uex Abmouc

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm The device is not functional! Gujdpfsicnk Esx Abmoc Chassis for sale,

Condition: used, Year of construction: 1992, Measuring range X-axis 2400 mm Measuring range Y-axis 1200 mm Measuring range Z-axis 1500 mm Gusdpfsg Er Nlsx Abmjc Machine weight approx. 9,00 t

Condition: good (used), Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for examining living cells and cell cultures in biology and medicine. Its inverted design places the objectives below the stage, enabling observation in larger culture vessels such as Petri dishes or microtiter plates. Technical Features Optics: Equipped with the ZEISS ICS (Infinity Color-corrected System) for high optical performance in all contrast modalities. Gsdpeyk Dbljfx Abmeuc Illumination: Standard with a 12 V 35 W halogen lamp for transmitted light; an HBO 50 mercury vapor lamp (model CFL) is available as an option for fluorescence applications. Contrast modalities: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C features an integrated front-mounted photoport (C-mount adapter) for digital documentation. Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC Coordinate Measuring Machine ACCURA II MASS 16/42/15 Year of manufacture: 2013 Refurbished: 2025 Measuring range: X=1600 mm, Y=4200 mm, Z=1500 mm Control: C99 SR VII Operating panel: BP26_SE Probe: VAST XT GOLD and RDS-CAA with VAST XXT Probe change rack: Multi Sensor Rack MSR Guedjydnzcopfx Abmoc Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 Equipment: Calibration sphere Exchange plates XT and XXT Changer rack positions Probe accessories Documentation Further accessories

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: Guedpfx Ajw D R Nqsbmec X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Year of construction: 2025, condition: ready for operation (used), A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible. Gjdpfjwihz Ijx Abmeuc

Condition: ready for operation (used), Year of construction: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Guodpswzldwsfx Abmoc

Condition: excellent (used), Scaningprobe for Zeiss UMM series with probe change adapter Guodpfx Aohgigbsbmjc

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Guedpfx Abovrd Uqsmoc Model Woody 500-100-1.0 SP Produced in 2019. Like new.

Condition: new, Year of construction: 2025, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Horisontal stainless steel tank AISI 304. Newer used - NEW! Gedpsga I Sqsfx Abmeuc

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Scanning Electron Microscope (SEM) Zeiss XB 350 Configuration and Accessories • Without FIB Column • SmartSEM- and SmartFIB-Software • GIS with Pt Precursor • Integrated Plasma Cleaner • EDS Oxford Xplore 30 (incl. Interface & Software) • Automatically 200 mm Air Lock • Electrical Feed-Through (2 x 15 Channels) • Circulation Cooling • Vacuum Buffer Tank (Quiet Mode) • ... and Table, Screen, Control Panel (i.e. Unique Zeiss Keyboard + Joystick) and Misc. Probe Holders Launch: August 2024 Site: Germany, Mainz Available at short notice by arrangement. The SEM is still in operation and can be viewed and demonstrated. Guedpfxjw Rdvvo Abmsc The device has no defects or quirks and is fully functional. Further information available on request!

Condition: new, functionality: fully functional, empty load weight: 4 kg, in original packaging, without any warranty whatsoever Gujdpfeyftbwsx Abmsc

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 133084, measuring range X-axis: 3,000 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, Carl Zeiss Pro T compact 3D coordinate measuring machine TECHNICAL DETAILS Control: C99S / FW: 19:05 Measuring head: RDS CAA No. 165: TP20 Measuring software: CMM-OS 5.4.12 Calibration sphere: 13320 r=15.00000 Measuring range: 3,000 x 1,600 x 2,100 mm CMM expansion coefficient X: 11.9 x 10-6 K-1 CMM expansion coefficient Y: 11.9 x 10-6 K-1 CMM expansion coefficient Z: 10.4 x 10-6 K-1 Gedpfx Aeyclnkebmjuc Holos software version: Holos 2.10 SP23 Rev. 3712 CMM-OS software version: CMM-OS 5.4 MACHINE DETAILS Length: 3,500 mm Width: 2,030 mm Height: 3,600 mm Calibration certificate and maintenance schedule from 2022 available

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Gedsw Titlspfx Abmjuc Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage and drives for external storage of data and images. hard disk for internal image storage and drives for external storage of data and images. This makes it possible to quickly and easily gain insights into the composition and morphology of Gusdpfx Ajfcwwnsbmjc morphology of specimen surfaces far into the sub-micrometer range. With magnification range from 5x to 300,000x, both macrostructures and microstructures can be examined. as well as microstructures is possible. The range of applications can be extended considerably by adding special accessories, allowing, for example analytical investigations in micro areas of the surface are possible. The device can be operated both via conventional switching elements and via the keyboard or mouse (add-on). or mouse (add-on). Electron optics and vacuum control are conventional. Functions of the Image memory functions are operated using the keyboard or mouse (add-on). A separate information screen is located centrally on the separate information screen for displaying the menus. These operating instructions are intended as a guide to help the user achieve the best possible results with the device. results with the appliance. The explanations have been kept as simple as possible so that even a less experienced user less experienced users the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Stages in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, untipped specimen 25 nm - guaranteed with tungsten cathode at 1kV, 6 mm working distance, untipped specimen 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, untilted specimen Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Year of construction: 2004, condition: good (used), Technical data Type: Pro Select Manufacturer: Zeiss Year of manufacture: 2004 The machine can be equipped with new software and control system according to customer requirements. Measuring range X = 14000 mm Y = 3080 mm Z = 3000 mm Measurement inaccuracy U3 Duplex=(68+L/35)µm <= 150µm Guedob Twi Nopfx Abmec Probe Probe: Renishaw MIH Renishaw TP 6 probe Software - Equipment Holos NT 2.4.22 On customer request the machine can be equipped with new software Other Double-ender system Installation and commissioning by our service partners possible. Price: on request We will be happy to provide you with a detailed offer. Note: Our offer is aimed exclusively at professional customers. (Changes and errors in the technical data, specifications and and prices as well as subject to prior sale)

Year of construction: 1999, condition: good (used), Technical data Type: SMM-D Manufacturer company: ZEISS Type of construction: single- and multi-pedestal design Drives: Highly dynamic DC servo drives, electronically monitored in all axes Control system: Multi-microcomputer system with 3-axis vector control for optimum control behaviour 4th and 5th axis rotary-pivot device DSE 05 Control panel for operation at remote measuring location Manual control of measuring device and DSE 05 via control lever with progressive characteristic, switchable to creep speed Protection class IP 54 for control and operating panel Display of the workpiece or device coordinates by display on the control panel or via the screen on the computer Measuring plate X = 16000 mm Y = 6100 mm Measuring volume X = 8000 mm Y = 3100 mm Z = 2700 mm Scanning head rotary swivel unit DSE 05 Motorized rotation in two orthogonal axes by +- 180° each Incremental measuring system with 0.5* resolution Angular speed up to 40°/second Angular position deviation +- 3 max. Torque: 140 Nm Max. Sensor weight: 1000g Repeatability <=1µm/200mm Gjdpfx Abjcilvvomouc Performance data Length measuring systems: electro-optical incident light system, resolution 1µm Travel speed: Automatic mode: 0 - 150 mm/s set-up mode: 0 - 80 mm/s Installation and commissioning by our service partners possible. Price: on request We will be happy to provide you with a detailed offer. Note: Our offer is directed at

Year of construction: 1997, condition: good (used), Probe measuring fixed The machine can be equipped with new software and control system according to customer's requirements. Measuring range X = 1000 mm Y = 860 mm Z = 660 mm Gjdpfx Aeb Dr Nmebmjuc Measuring accuracy in µm 3.6µ + L/200 Stylus changing device Manufacturer: ZEISS Type designation: AUTO-RUN Software Operating system: HP Unix Measurement software: UMESS UX Installation and commissioning by our service partners possible. Price: on request We will be happy to provide you with a detailed offer.

Condition: used, machine/vehicle number: 109369/109370, Technical data Manufacturer: ZEISS Serial No. 109369/109370 Plate is divided in the middle Measuring plate Length = 6000 mm width = 3000 mm Height = 350 mm The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! Godpfx Asdbi Nlobmjuc We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices and subject to prior sale)

Year of construction: 1996, condition: used, Technical data Horizontal type Joint plate, but both measuring arms run in single-stand operation SMM1, serial No. 7057760595(1), year 1995 SMM2, 96346 serial number, year of manufacture 1996 Measuring plate X = 3500 mm Y = 2000 mm Measuring volume SMM1 X = 2500 mm Y = 1600 mm Z = 1800 mm Measuring volume SMM2 X = 2500 mm Y = 1200 mm Z = 1500 mm Software Gjdpfjdtf I Hjx Abmouc 1 x, Holos CNC dongle operated Prof license light, extended and geo with Windows 7. 2 x interface licenses HOLOS QS-STAT 2 x control software CMM OS CNC 5-axis units The machine can be upgraded to customer specification with new software. Price: On request! Setup and commissioning possible! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Year of construction: 1999, condition: good (used), Technical data on request! Assembly and commissioning by our service partners possible. Godpecilwgefx Abmeuc Price: on request We will be happy to provide you with a detailed offer. Note: Our offer is aimed exclusively at professional customers. (Changes and errors in the technical data, specifications and and prices as well as subject to prior sale)

Condition: good (used), machine/vehicle number: 565301951 / 565201951, Accessories Actuators BWF SII 40 pieces Measuring system Renishaw Measuring plate 1 X = 8100 mm Y = 1750 mm Gedpfjdfddzex Abmouc Z = 300 mm Measuring plate 2 X = 8100 mm Y = 2000 mm Z = 300 mm Measuring volume X = 7300 mm Y = 1600 mm Z = 2800 mm The machine can be upgraded to customer specification with new software. Price: On request! Setup and commissioning possible! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Changes and errors in the technical data, information and prices and subject to prior sale!)