Used Wieland Copper Pipe for sale (3,179)

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 Pjdpjz Tn Edjfx Adljrc +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends Prjdpfx Asy R Ipnedlsc * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 33,500 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 08/2011, next inspection (TÜV): 04/2027, loading space volume: 32 m³, Year of construction: 2011, Equipment: ABS, Stock No. 5867 31.5 m³ Feldbinder silo semi-trailer for powdery and granular goods / 1 compartment / aluminum rims ----* Manufacturer: Feldbinder * Type: FEUT 32.3 - Silo semi-trailer * First registration: 08/2011 * Gross vehicle weight: 37,000 kg * Unladen weight according to vehicle registration certificate: 3,500 kg * Payload: 33,500 kg * Suspension: Air suspension * Axles: 3 x BPW, with 1st axle as a lift axle / disc brakes * Tires: 385/55 R22.5, approximately 60% tread, on aluminum rims * Color: Chassis RAL 3002 chimney red, silo container RAL 1013 pearl white * Volume: 31.5 m³ / 1 compartment * TÜV (technical inspection): 04/2027 Prsdpfx Ade Afr S Dslsc * EBS Wabco * 2 discharge cones DN800 * De-aeration mats * Pressure tank 2 bar * Operating temperature from -40 degrees to +80 degrees * 1 top manhole cover DN450, swiveling and foldable * Pinch valves * 4 inch central discharge to the rear * Access platform with walkway on the rear left, can be erected from above * Continuous mudguards * Aluminum air reservoir * LED work lights * LED reversing lights * Rear storage box * Loading pressure gauge * 3 hose pipe boxes on the right * Without supports German semi-trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or information. We assume no liability for errors, changes, or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY. Pedjz Am Evepfx Adlerc

Condition: new, functionality: fully functional, SALVATORE ROBUSCHI RCC 32-20C cantilever pump – 5.5 kW – 15 m³/h Industrial vertical cantilever pump by Salvatore Robuschi, equipped with a vortex impeller and FELM IE3 three-phase motor. Assembly includes a long immersion column, separate discharge pipe, mounting plate and guarded coupling. Designed for installation above a tank or sump. The cantilever construction requires no submerged shaft bearings or bushes. Suitable for various industrial liquids and solids-laden liquids, subject to material compatibility and operating conditions. Type: RCC 32-20C Prjdpfe Aa Dbyjx Adljc Serial number: 2010042272 Nameplate date: 06/2022 Nameplate duty point: 15 m³/h at 12.3 m head Motor: FELM FA3-132S-4, 5.5 kW Supply: 400 V delta / 690 V star, three-phase, 50 Hz Rated current: 10.9 / 6.3 A Speed: 1,450 rpm Efficiency class: IE3 Protection: IP55; insulation class F Pump casing in corrosion-resistant cast stainless steel CF8M (EN 1.4408, cast equivalent of AISI 316)

Condition: used, Year of construction: 2009, operating hours: 7,515 h, GUIDETTI SINCRO 950 – Cable Granulator, 37 kW Main Motor, Dry Separation Table, and SIMCO Anti-Static System We offer a used GUIDETTI SINCRO 950 cable recycling machine designed to recover copper through granulation and dry separation of metal from cable insulation. The process combines cable granulation in a knife mill with separation on a vibrating dry separation table. The machine is suitable for cable recycling facilities and non-ferrous metal processing companies. Technical specifications: Manufacturer: GUIDETTI Recycling Systems – Italy. Model: SINCRO 950. Year of manufacture: 2009. Serial number: 9501000025. Machine weight: 3,000 kg. Supply voltage: 400 V. Frequency: 50 Hz. Electrical supply configuration: 3P + PE. Full-load current: 120 A. Marking: CE. Separation method: dry separation on a vibrating table. Main granulator: Main motor power: 37 kW. Rotor diameter: 420 mm. Rotor width: 900 mm. Cutting configuration: three-row V-shaped cutting arrangement. Additional equipment – SIMCO anti-static system: 4 ionising bars installed above the separation table. Bar model: SIMCO P-Sh-N. 2 SIMCO A2A7S high-voltage power units. Power unit supply: 230 V AC, 50 Hz. Peds Abwuvspfx Adlsrc Bar operating voltage: 7 kV AC. Power unit protection rating: IP54. The SIMCO system neutralises electrostatic charges generated during material processing. It reduces the attraction and adhesion of insulation particles, supporting the separation of plastic from copper. Please contact us for further information or to arrange a viewing.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW Psdoztvwiepfx Adlorc - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: used, mileage: 600 km, power: 129 kW (175.39 HP), first registration: 10/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, a different engine, different dimensions, or something else? Please feel free to contact us. We offer financing and leasing at attractive terms – also for the Netherlands, Austria, and for new businesses! ----VEHICLE* Wheelbase: 3750 mm * 6-speed manual transmission * Double cab 6+1 * Dual tires rear axle * Permissible total weight: 7.0 t / 7.2 t * Axle configuration 4x2 * Left-hand drive * Model year 2024 * Exterior color: White IC 194 INTERIOR* Comfort driver's seat, sprung * Co-driver's bench seat with multi-functional storage * 4-seater bench in the passenger compartment * Comfort headrests * Seatbelt pretensioner co-driver side * Seatbelt warning signal driver/co-driver * Seat covers in fabric ELECTRICAL SYSTEM/LIGHTING* Connectivity Box 4G * Daytime running light * Digital EU tachograph 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * High beam control manual * Additional speed limiter * Speed limiter 90 km/h * Trailer socket 12 V 13-pin * Generator 3080 W (14 V x 220 A) * Preparation for toll system (OBU) CAB EXTERIOR* Mirrors for body width 2350 mm * Wide wheel arch covers * Blind spot radar behind the cab * Fuel filler neck in the B-pillar * Turning assistant co-driver side (BSIS) * Tire pressure monitoring system * Front area monitoring system (MOIS) * Lane keeping assistant * Emergency braking assistant AEBS with City Brake * Exterior mirrors electrically adjustable and heated * Splash guards on the front axle * Additional vehicle key with remote control * Fog lights * Headlights front halogen * Windows tinted CAB INTERIOR/AUDIO* Digital radio DAB 7" touch * USB socket driver/co-driver side * Central locking with remote control * Grab handle on the A-pillar * Cab rear wall with window * Traffic sign recognition with speed assistant (ISA) * Electric windows * Left-hand drive for right-hand traffic * Airbag driver and co-driver * Preparation for alcohol interlock system * Roof storage above the windshield * Air conditioning manual * Air conditioning compressor 170 ccm * Auxiliary hot water heater * Cruise control * Driver drowsiness detection system (DDAW) CHASSIS* AdBlue tank 20 liters under the cab * C-profile steel ladder frame * Underrun protection rear * ESP system Podpfx Adoz Edp Iolerc * Fuel tank 90 liters integrated * Parking brake manual, center * Steel rims * Tires 225/75 R16 M+S * Standard suspension front axle * Trapezoid spring with auxiliary spring rear axle * Wheel chocks, 2 pieces * Trailer coupling ball head * Additional automatic trailer coupling on the rear cross member * Trailer load 3.5 t ENGINE/TRANSMISSION/AXLES* F1C engine, 176 hp * Emission standard EURO VI E * 6-speed manual transmission MT 50.6 * Rear axle ratio i = 4.30 * Power take-off Hydrocar 25I2 * Differential lock on rear axle * EDS Traction Plus * Protection for oil pan * Crankcase ventilation heated * Diesel particulate filter * Radiator in aluminum * Settings for special fuel * Heated fuel filter * Comfort noise insulation * Operating and maintenance instructions electronic * Printed in German BODY* Meiller D204 body * Meiller tool box * Preparation for tipper * Interface for body manufacturer with extended module and CAN 2.0B * Exhaust pipe end on the left side * Body dimensions: 3.00 m L x 2.00 m W x 0.40 m H mm Additional extras for the body are available at an extra cost. ----Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. If it is not in Wachtendonk,

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Podsz N A Npjpfx Adlerc Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: new, Year of construction: 2026, Firing chamber output: 34 kW Working power: 29 kW Pjdpfx Aopkwhqsdljrc New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: used, maximum load weight: 29,720 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, Bottom loading and top loading for gasoline, diesel, heating oil, etc. Saddle plate height 1200mm unloaded. Metering system: as per GMV with additional venting, meter DN 100 / 1,000 l/min, manufacturer Sening, with full-hose valve. 1 measured outlet. Emptying hose, cylindrical shape, separate parallel tank, material: light metal, 0.5 bar test pressure. 5, 5.0 mm minimum wall thickness, head 5 mm, bottom 7.5 mm. 5 Chamber 1 with sloped bottom plate, discharge slope towards the rear (wedge). 5 3 chambers, approx. 38,500 l gross, distribution from front: 13,300 / 6,000 / 19,200 liters gross. 5 Total filling volume approx. 36,200 l net, max. filling volumes: 12,500 / 5,500 / 18,200 liters (= max. filling volumes for bottom loading according to VOC. The actual usable filling volume also depends on the permissible axle loads and the permissible total weight!). 5 Baffle plates as required. 5 Discharge slope controlled by actuating the air suspension during discharge. Lifting loops at the front and rear of the tank to upright the partially loaded tank semi-trailer. 5 Conductors (deflectors) in the chambers to dissipate static charge. 5 Supports (small tables) as bottom valve protection and for holding the filling pipe during top loading, mounted in each chamber. Walkway / ladder / folding railing: as per safety walkway on the right. 5 1 folding railing within the dome fairing, right. 5 Intermediate platforms in front of the dome covers. 5 1 access ladder at the rear right. Dome fittings: 5 per chamber: • 1 manhole cover NW 500 (EN 13317) with filling opening DN 265, recessed installation. • 1 pneumatic tilt valve with sequential control. • 1 vent pot with flame arrester. • 1 overfill protection, electric VOC version (EN 13922). Bottom fittings: « Per chamber 1 pneumatic bottom valve DN 100 (EN 13316). « 1-channel collector. Bottom loading: 5 Bottom loading cabinet on the left. • Swing flap, lockable (square lock). • Drainage channel and drainage device (front). 5 per chamber: • 1 filling coupling. • 1 electric overfill protection system (VOC) 10-pole VOC socket, acting on the land side. Unloading device: « Right side in the fitting cabinet: • Bus flap, lockable (square lock). • Drainage channel and drainage device (front). 38,500 l capacity, 3 chambers (13,300/6,000/19,200), wall thickness 5mm, tank code LGBF for low-viscosity mineral oils class 3. 1 metering system, pump 1x full-hose, discharge on the right side of the vehicle, hydraulics: 8 Hydraulic pump drive. Hydraulic hoses. Coupling plugs (supply / leak oil / return). Pneumatics: for supplying the braking system, air suspension and the tank fittings: Air tank made of aluminum. Test connections combined. Accessories: 2 fire extinguishers 6 kg in a plastic box. 2 wheel chocks. 1 changeover warning board at the rear. 3 flame symbols, foldable. 3 hazard labels “environmentally hazardous substances” (Fisch & Baum), foldable. Rear view camera, manufacturer Motec, in the upper lighting bar. Pneumatically actuated flap at the rear of the trailer. Supply of the imaging components for the tractor unit (without installation). 1 container cabinet made of light metal, rear right. Acoustic reversing buzzer at the vehicle rear. Inclination indicator (level), right. 2 grounding lugs per vehicle side. 1 aluminum hammer, right. 1 shaft hook, right. 2 pole boards, right. 2 absorbent containers with holder. Pylons with holder. Shovel and broom. Drip trays under the outlets. Shaft cover. Pedpfx Ade Agduzsljrc

Condition: new, Year of construction: 2025, load capacity: 25,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,995 mm, fork length: 2,400 mm, empty load weight: 36,900 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including the drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on-site now and receive expert advice – we will find the right solution for you. Industrial Truck Data: Manufacturer: Heli Model: Counterbalance Forklift CPCD250-G2-VO Power source: Diesel Lifting capacity: 25,000 kg Year of manufacture: 2025 Operating hours: 0 Prodpfxey Rqpwe Adlsc Lift height: 4,000 mm Mast type: Duplex Free lift: No Overall height: 3,995 mm Fork length: 2,400 mm Unladen weight: 36,900 kg Tyres: Solid rubber Model designation: CPCD250-G2-VO Cab type: Full cabin – front, roof & rear window + steel doors (suspended) Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Road equipment for potential use on (restricted) public roads: beacon, tail lights, reversing lights, reflectors, etc. Attachment: Side shifter Attachment: Fork positioner Attachment: Additional hydraulic circuit – piped to fork carriage

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28. Pjdpfx Ae Adrpajdljrc

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 20231230S0313C01, nominal power: 1.5 kW (2.04 HP), overall weight: 120 kg, rotational speed (max.): 28 rpm, total height: 1,400 mm, total length: 1,020 mm, total width: 400 mm, type of cooling: air, SML SG-2425-2CM slow-speed grinder for placement next to the injection molding machine. Designed for the direct grinding of sprues and small quantities of rejected parts, including hard and thick-walled components. Equipped with a proportional valve for the direct return of ground material to the machine. Podpfo Ad Hcbjx Adlorc Technical specifications: - Grinding chamber: 250 x 240 mm - Capacity: 15-20 kg/h - Speed: 24 rpm - Motor power: 1.5 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 450 x 900 x 1130 mm - Weight: 230 kg Features: - Slow-speed system with toothed blades and staggered cutting blades; produces little dust and fine material - Low noise level - Proportional valve for mixing ground material with new material - Collection bin for ground material included as standard - Multiple safety features Available for immediate delivery from stock.

Condition: used, functionality: fully functional, total width: 3,000 mm, total length: 1,800 mm, total height: 6,000 mm, Bag filter Dimensions: 3000 x 1800 x H 6000 Air flow rate m³/h: 10,000/13,000 No. 108 bag filters, L. 3000 Filtration area m²: 120 No. 02 explosion-proof ventilation panels Pjdpozy R Shofx Adlerc No. 01 motorized screw conveyor No. 01 star valve Ladder Excluded: - Fan - Electrical control panel - Piping in general

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, temperature: 155 °C, KÄRCHER HDS SUPER M Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90/155 Connected load [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M Podpfx Ao Ady Ttsdlerc NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Prodpfx Adskdnv Teloc Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 219400 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 Prsdpfx Aox Urp Hjdlec 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 185300 € 3502.17 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 3100 x 1525 mm 3100 mm 1525 mm 125 mm Psdex U Elbepfx Adlerc 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Prodpfx Adj Afxu Solsc Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: good (used), mileage: 485,500 km, power: 315 kW (428.28 HP), first registration: 07/1998, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 6x4, wheelbase: 3,350 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Equipment: ABS, air conditioning, differential lock, = Additional Options and Accessories = - Heated mirrors - Leaf-sprung suspension - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Hub reduction - Radio/CD player - Sun visor - Power take-off (PTO) - Power take-off (PTO) - ZF16 manual gearbox = Notes = GOOD CONDITION, HEAVY-DUTY MERCEDES-BENZ ACTROS 2643B 6x4 with FULL STEEL SUSPENSION CHASSIS, REDUCTION AXLES, and MANUAL GEARBOX! 430HP, V6 ENGINE!! ZF 16-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! STANDING EXHAUST PIPE!! ETC.!! CHASSIS LENGTH BEHIND CAB: Approx. 5.00 M!! TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR HEAVY-DUTY WORK!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR CURRENT STOCK ON OUR WEBSITE! SHIPMENT, STACKING, TRANSPORT, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE-STOP-SHOP" COMPANY!! Prjdj Afzxtjpfx Adlsc YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (/) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = General Information Year of Construction: 1998 Technical Information Number of Cylinders: 6 Engine Displacement: 11,940 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle Configuration Tire Size: 295/80R22.5 Brakes: Disc brakes Suspension: Leaf-spring suspension Front Axle: Max. axle load: 7500 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear Axle 1: Twin tires; Differential lock; Max. axle load: 13000 kg; Tire tread left inner: 10%; Tire tread left outer: 10%; Tire tread right inner: 10%; Tire tread right outer: 10%; Reduction: External planetary axles Rear Axle 2: Twin tires; Differential lock; Max. axle load: 13000 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: External planetary axles Weights Unladen Weight: 9,230 kg Payload: 16,770 kg GVW: 26,000 kg Functional Body Brand: ZF Condition Technical Condition: very good Optical Condition: good Further Information Please contact the Sales Department for more information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service Prjdpfx Ads Agi Ukelsc ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: new, functionality: fully functional, Welding tractor, ABICAR 1200 PRO 42V, new unit from stock, original packaging Psdpfx Ae Afd Nbedljrc Mobile unit for welding longitudinal seams with maximum efficiency. Production of continuous butt and fillet welds – by using these welding systems, longitudinal seams can be produced faster and costs for rework can be significantly reduced. In combination with accessories, the following applications are possible: • Welding with oscillation, • Use of welding torch with larger diameter, • Operation of the unit on outer edges, overlap joints, plates, pipes, tanks, etc. Operation: in combination with welding power source iMIG POWER 400 (available in stock) * Torch type: MIG/MAG * Torch diameter: 16 – 22 mm * Voltage: 1 … 42 V, 50/60Hz * Power: 25 W * Workpiece thickness min: 5 mm, ground clearance 5 mm * Speed horizontal / vertical: 0 – 120 cm / min, 0 – 110 cm / min * Curvature radius min: 1,500 mm * Dimensions (L x W x H): 401 x 372 x 236 mm * Weight: 14 kg (welding tractor) * Manufacturer: ABICOR BINZEL, Germany * Several units available Delivery/shipping possible against cost coverage. Image of the product is similar.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,420 h, load capacity: 5,000 kg, lifting height: 4,040 mm, free lift: 1,975 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25 R15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, fork extension, hydraulic fork positioner, lighting, pallet forks, # COMBILIFT C5000FSL | DIESEL | DUPLEX 4040 MM | FREE LIFT | FORK POSITIONER | FULL HEATED CAB 🚜 🔧 FULLY SERVICED | 🛞 NEW TIRES | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a reliable and powerful sideloader for handling long and heavy materials, this COMBILIFT C5000FSL is an excellent solution for demanding industrial applications. Manufactured in 2018, the machine features a reliable Deutz diesel engine, Duplex mast with 4040 mm lift height, 1975 mm free lift, hydraulic fork positioner and full heated cabin. Before delivery, the forklift undergoes comprehensive inspection, servicing and operational testing. It is also equipped with 100% brand-new pneumatic tires. 🛞✅ ## ⭐ KEY ADVANTAGES * 💪 5000 kg load capacity * ⚙️ Deutz diesel engine * 📏 Duplex mast – 4040 mm * ↕️ 1975 mm free lift * ↔️ Hydraulic fork positioner * 🔥 Full heated cabin * 🛞 100% brand-new pneumatic tires * 📦 1200 mm platform * 🍴 1200 mm forks * 🔧 Fully serviced and tested * 🛡️ Warranty available * 🎥 Live online demonstration * 🚛 Direct delivery * 🌍 Worldwide transport ## 📋 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000FSL Type: Sideloader Forklift Year: 2018 Serial Number: 38028 Capacity: 5000 kg Operating Hours: 6420 h Engine: Deutz Diesel Mast: Duplex Lift Height: 4040 mm Free Lift: 1975 mm Fork Positioner: Hydraulic Positioner Width: 1350 mm Forks: 1200 mm | 120 x 50 mm Cab: Full Heated Operator Cab Service Weight: approx. 9500 kg ## 📐 DIMENSIONS Overall Height: 2650 mm Lowered Mast Height: 3000 mm Length: 4650 mm Width: 2100 mm Platform: 1200 mm ## 🛞 TIRES Front: Pneumatic 8.25 R15 – 100% NEW Rear: Pneumatic 8.25 R15 – 100% NEW ## ⚙️ EQUIPMENT * Hydraulic fork positioner * Duplex mast with free lift * Full heated operator cabin * Deutz diesel engine * Working lights * Brand-new pneumatic tires * 1200 mm forks and load platform Prsdpfx Ads Agk A Aslec ## 🔧 PROFESSIONAL PRE-DELIVERY PREPARATION Before delivery, the forklift undergoes comprehensive technical inspection and servicing, including: * Engine and drivetrain * Hydraulic system, hoses and connections * Mast, chains and lifting components * Steering and braking systems * Forks and fork positioner * Tires and wheels * Electrical and safety systems * Working lights * Oils, filters and operating fluids The machine is operationally tested and prepared for immediate use at the customer's facility. ✅ ## 🏭 IDEAL FOR 🪵 Timber & sawmills 🔩 Steel mills & service centres 🏗️ Structural steel ⚙️ Metal & aluminium processing 🔧 Pipes and profiles 📏 Long steel sections 📦 Long and bulky loads 🏭 Manufacturing facilities The sideloader design makes the C5000FSL particularly suitable for transporting long materials while maintaining excellent manoeuvrability. ## 🏆 WHY FT LOGISTICS? We specialise in COMBILIFT multidirectional forklifts and sideloaders. Every used machine undergoes professional inspection, servicing and operational testing before delivery. ## 🤝 WE PROVIDE 🔧 Professional pre-delivery service 🛡️ Warranty options 👨‍🔧 Technical support 💶 Leasing & financing 🚛 Worldwide transport 📄 Export & customs documentation 🎥 Live online demonstration 📸 Additional photos & videos # FT LOGISTICS 🚜🌍 We deliver machines that are ready to work. ✅

Condition: used, Year of construction: 2014, operating hours: 10,000 h, machine/vehicle number: LC696, Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control infrastructure for coordinated process management. A main brewery electrical cabinet, brewhouse command panel with software, pneumatic valve control board, pump control cabinet and mixer motor cabinet support automated process functions. Fermentation is supported by a dedicated command cabinet with software, while K&P heat control electronics manage thermal process control.This arrangement is suitable for industrial packaging and beverage production environments where stable control of pumps, valves, heating and cooling functions is essential to repeatable beer processing.Production Line Integration CapabilitiesThe installation is arranged as an integrated brewery process plant rather than a bottle filling and packaging line. It supports the upstream preparation of beer prior to transfer to compatible downstream bottling, canning or kegging equipment. Process pumps, stainless steel piping, steam distribution and glycol installation provide the essential connections between brewing, fermentation, filtration and cooling stages.Machine TypeManufacturer / ModelYearVarious EquipmentVELO yeast mill2004TankTM INOX hot water tank, 10 m32014TankMash boiling tanks, 3.5 m32004FilterTM INOX malt filter tank, 7.8 m32014TankTM INOX hop boiling tank, 7 m32014TankTM INOX buffer tank, 7.2 m32014 Prodpfxj Adtqfs Adloc