Used Weing Dimter Gluing Press for sale (35,648)

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Dsdev T Aqyepfx Aahjuw Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Year of construction: 2004, condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture Dedpfxsncc Ico Aahjuw crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Transport can be organized

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Dedpfsqmizdsx Aaheuw Working height: 850 mm Drive: Rexroth servo more available also other length

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Duedew Uf Tkjpfx Aahow Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: good (used), with integrated crosscut saw For cutting the lamellas of the glued timber beam to length. Machine length 2200 mm Machine width 1200 mm Working height 850 mm without control system Dedpsg E Iqfjfx Aahjuw

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit Dodeg T Spaspfx Aahsuw feed rollers with servo drive saw >>without electrical equipment

Condition: good (used), Sorting system, sorting conveyor belt, sorting process after an optimization saw. Conveyor belt length: approx. 8,000 mm Conveyor belt width: approx. 250 mm Dedpfxog Ufnxo Aahouw Working height: without legs Drive: without motor 5 pneumatic buffers The conveyor belt is disassembled for transport; cables and hoses need to be replaced.

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Dusdpfx Aaju Nyu Sehew Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Find more items in our shop!

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Djdpfx Aaezgf A Ushjuw Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 0294898, functionality: fully functional, operating hours: 20,000 h, pressing force: 100 t, ram plate length: 3,300 mm, total length: 3,800 mm, total height: 2,500 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Stroke length: 3,300 mm MACHINE DETAILS Operating hours: approx. 20,000 h Dimensions & Weight Machine dimensions (L x W x H): 3,800 x 2,000 x 2,500 mm Machine weight: 8,000 kg Dodpfx Aaezhlntshsuw EQUIPMENT Tools

Year of construction: 2016, condition: used, press capacity 14,5 MN operating pressure 310 bar stroke of press 960 mm speed Press: max. 23 mm/s speed Press: nom. 17 mm/s Extrusion Press SMS - HyBrEx 14 - Extrusion centerline above pass line: 1.000 mm - Extrusion height above pass line: 3.400 mm BILLET CONTAINER - Contact force: 1.4 MN - Retraction force: 1.0 MN - Retraction stroke: 1,155 mm - Bore diameter: 160 mm - Container length: 830 mm - Billet length, min. - max.: 250–800 mm - Shortest billet length (with billet shearing): 200 mm SHEARS Dujdpszhxiwjfx Aahew - Shear, cutting force: 0.4 MN - Profile shear – tool slide, cutting force: 0.2 MN PROFILE CIRCLE / TOOL ASSEMBLY - Die backer opening – diameter: 190 mm - Die backer opening – width: 230 mm - Tool assembly – diameter: 330 / 277.5 mm - Tool assembly – height: 380 mm HYDRAULIC SYSTEM Four high-pressure oil pumps - Max. operating pressure: 310 bar - Drive power: 75 kW High-pressure variable-displacement pump - Max. operating pressure: 320 bar - Drive power: 5.5 kW Low-pressure double pump - Max. operating pressure: 320 bar - Drive power: 37 kW Filter and cooling pump - Max. operating pressure: 6 bar - Drive power: 5.5 kW INSTALLED MOTOR POWER - Billet container: 2x 15.7 kW - Moving crosshead: 2x 31.7 kW - Billet loader: 14 kW Connected load: 600 kVA

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Dedpfx Asx A Hfvjahouw

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm No of Pressing cylinders: 4 No of Daylights: 1 Dusdpfx Aajx A Tf Ashjw

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 470 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, table width: 900 mm, table length: 3,200 mm, throat depth: 400 mm, Equipment: safety light barrier, Machine type Electro-hydraulic servo numerical control bending machine Dodpfx Aaszgzt Njhsuw Order Type Non-Standard Basic parameter Pressure 220t Workbench length 3200mm Workbench height 900mm Column spacing 2500mm Throat depth 400mm Slider stroke 200mm Maximum opening height 470mm Fast descent speed 120mm/s Return speed 120mm/s Work speed 10mm/s Rear gauge (X-axis travel) 550mm Maximum operating speed of the X-axis 400mm/s X-axis positioning accuracy ±0.05mm X-axis repeat positioning accuracy ±0.02mm Y-axis positioning accuracy ±0.02mm Y-axis repeat positioning accuracy ±0.01mm R-axis stroke 100mm Maximum operating speed of the R-axis 100mm/s Working accuracy: Straightness ±0.2mm/m, angularity ±0.5°/m KW Main motor power (servo motor) KW 22KW Rated power (servo motor) KW 25.03KW Fuel tank capacity 200L Oil product model 46# Hydraulic Oil" Overall dimensions (length * width * height) 4200mm*1950mm*2700mm Weight 12T

Condition: ready for operation (used), Technical specifications Force: 2200 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 300 mm Distance table – ram: 570 mm Gap: 400 mm Turbo PP5400 Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Weight: 13500 kg Motor: 37 kW Oil: 350 L Weight: 14500 kg LxWxH: 5700 x 2100 x 3685 mm Table: PP8170 V-axis  EFL 130 PP8303 Upgrade 2026  Top tool clamping: PP3090 – Wila  Hydraulic top tool clamping: PP3100  PP3160 hydraulic clamping V-dies  Back gauge: PP8251 XRZ modules: X1000 Dujdpfx Aaezkxqmjhsw  Security; CE: PP3580 – lasersafe  PP8402 T1 T2

Condition: used, Year of construction: 2021, controller model: 15" Touch B Panel PC, _____ Description: Year of manuf. : 2021 Control : 15" Touch B Panel PC Working length : 1530 mm Pressing force : 400 kN Dujdszkxkmopfx Aahjw Technical Specifications Machine Type:Press Brake / Robotic Bending Cell Year of manufacture:November 2021 Operating hours:655 h Number of bends:18,337 Max. pressing force:400 kN Working length:1,530 mm Column width:1,530 mm Max. stroke:200 mm Distance between table and ram:400 mm Working height:975 mm Max. working speed:25 mm/s Machine weight Features Control:15" Touch B Panel PC (touchscreen) Angle measurement system Robot:KUKA 6-axis robot KR12R1810 / ME-30-60-60 Robot payload:12 kg Rear stop:5-axis (X1, X2, R, Z1, Z2) made of aluminum Gripper system:Combination gripper (equipped with six suction cups and a clamp) Safety system:Iris Lazersafe (bending line safety) Cell protection:Protective fence with electrically controlled access door

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment Duedpfxezil S Uj Aahjw * 90 t pressing force * 1 main press cylinder * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: excellent (used), Year of construction: 1983, pressure 630 t Djdsxvdr Hepfx Aahsuw diameter 320 mm stroke 310 mm weight of the machine ca. 3500 t

Condition: excellent (used), Year of construction: 1960, pressure 25 t weight of the machine ca. 25 t Dodpfjyrtwfjx Aahjuw

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Dsdpfxet Hwuie Aahouw

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) Dusdpjt Hw Amofx Aahjw

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW Duedpfx Ajt Hwpyoahow weight of the machine ca. 16 t dimensions of the machine ca. m

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Dusdjvu E Iqjpfx Aahsw

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm Dujdpfxst Hw Ezo Aahew stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg Duedpfxot Hw E Ie Aahsw dimensions of the machine ca. 2000x2400x3650 mm