Used Vetter Mc 712 for sale (1,961)

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm Bdedpfxsxxmmrs Aa Dob table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, *AVAILABLE IMMEDIATELY* with steel sheet walls, 4x support legs Special price for demonstration stock vehicle from 2023 – No initial registration!! Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 661 kg • Payload: approx. 1,339 kg • Internal dimensions: 288 x 194 x 200 cm (L x W x H) • Overall external dimensions: 447 x 250 x 256 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13-inch alloy wheels • Brakes: Yes • Jockey wheel: Yes • 100 km/h approval: optional at extra cost • Vehicle documents included Equipment: • Robust V-drawbar, fully hot-dip galvanized • KNOTT overrun brake system • 18 mm thick floor plate • Reinforced steel sheet side walls and roof • Rear double-wing doors • Lever lock on rear doors • 6 tie-down rings on the floor • Jockey wheel • Auto-reversing system • Plastic mudguards • 13-pin connector • Reverse light • Large-size safety lighting • Integrated rear fog light • Body: splash-water protected • Registration documents: ZBII & COC papers Optional accessories (available on request): • Anti-theft device • Lashing straps • Additional lashing eyes • Slat rails with rubber coating for lashing straps & load bars • Load bars in steel or aluminium • Interior lighting • Reversing light • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - Vehicle registration document dispatch in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are copyright protected!! Bdodpfx Asyyw Irea Deb Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years: specialist dealer and service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Errors, omissions and prior sale excepted -

Condition: good (used), Year of construction: 1997, functionality: fully functional, STC-Ref:G-671-2397 Horizon MC-80a, Year: 1997 Format: 318x470 mm Ausstattung: - 1. tower Typ MC-80a , 8 stations - 2. tower Typ MC-80m defect (for slaughter) Bdjdpfxsygmgps Aa Deb

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software Bdjdpfoyv H Nkjx Aa Djb • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors • Axis control: CNC controlled • Spindle type: Electrospindle • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Technical Specification Taper Size ISO 30

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 212 h, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 1,585 mm, fuel type: diesel, mast type: triplex, construction height: 2,338 mm, fork carriage width: 1,260 mm, empty load weight: 4,440 kg, drive type: Diesel, construction width: 1,450 mm, Rough Terrain Forklift Bjdpfxewqtyfj Aa Djdb Load Center: 500 Mast Type: Triplex Technical Condition: New Front Tire Size: Solidal 12 SL R4 Off-road Tread GESA Front Tire Condition: 80 - 100% Rear Tire Size: Solidal XTra 27x10-12 SKS Off-road Tread GES Rear Tire Condition: 80 - 100% Battery Voltage: 12V Load Backrest, 3rd Valve, 4th Valve, Heater, Full Cabin, CE Certificate, Image may be a sample photo Paddle 100x45x1200 mm Exterior Mirrors Left and Right, Mechanically Suspended Plastic Seat, Road Lighting Halogen Front/Rear, Reinforced Battery Capacity 12V 110AH 750A, Radiator Metal Protective Grid, Ecostop, Raised Vertical Exhaust on Counterweight, Load Cushioning, Load Backrest Width 1260 mm LB1260, Mast Tilt 1210 Forward/Back, Rear Mud Flaps Rubber, Easy Link STD Module, Front Fender Extensions Metal, Total Width 1400 mm MI

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm Bdodpfx Asvxwl Aoa Dsb z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool- management. without coolant device - was connected to the central supply.

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Bdedpfx Aoyvuh Ioa Deb Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: ready for operation (used), Year of construction: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture 1985, weight 8 tons. Control system Mazatrol T3, with three-jaw chuck, tool turret, tailstock. Ready for use, can be viewed while still powered. Bdodpfx Aaovzgyhs Deb

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Bdsdpfx Aaemzbr Sj Deb Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M08E/7120, Offer Number: M08E/7120 Machinetype: 8 die - 8 blow transfer header Info: bushing cut-off Make: LACHAUSSEE Type: Fo 10 - 712 Constr. year: 1984 diameter range: 6,5 mm number of dies: 8 number of stations (incl. cut off): 9 cutting length: 6-10 mm plane of stroke: 123 mm output - pieces/min: 150 Location: Europe Bedpfx Aswi Tapoa Djdb

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Bdodoyx U Hispfx Aa Dob Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: good (used), functionality: fully functional, fuel type: electric, color: other, overall weight: 27,000 kg, empty load weight: 21,100 kg, operation weight: 27,000 kg, maximum load weight: 25,000 kg, tire size: 355/50-20", axle configuration: 2 axles, number of seats: 1, Year of construction: 2015, operating hours: 147 h, machine/vehicle number: 0174, Pick & Carry Crane Year of manufacture: 2015 Condition: used Lifting capacity without jib: max. 25,000 kg Lifting capacity with jib: max. 15,000 kg Lifting capacity with extension: max. 7,000 kg Lifting height without jib: max. 12.50 meters Lifting height with jib: max. 13.20 meters Lifting height with jib + extension: max. 15.00 meters Bdjdpfx Asyxz Rzoa Djb Length: 4470 mm Width: 2150 mm Height: 2200 mm Own weight: 27,000 kg Steering: rear axle steering, steering angle 90°/90° Mast type: telescopic (with hook, jib + extension) Battery: 96V - 1125 Ah Motor: 2 x AC electric motors, 12 kW, 96V Tires: 355/50-20" Radio remote control Electronic load limiter Non-marking tires Special paint finish Jib + extension Transport frames for counterweights ----- Please note: Complete battery replacement scheduled for March/April 2026 -----

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available Bsdpfx Asl Dvtksa Dedb -Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Condition: excellent (used), travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,200 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    Bdjdpfx Aeyucc Noa Djb X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Bedpfjyub Udex Aa Dsdb Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, MECAL MC 304 ATLAS Machining Center – Year 2007 4-axis machining center equipped with a frontal machining head, specifically designed for aluminum processing. General Features: Maximum working length: 7430 mm Positioning accuracy: ± 0.015 mm Positioning repeatability: ± 0.015 mm Installed electric power: 8 kW Power supply voltage: 380 V – 50 Hz Frequency: 50 Hz Operating pressure: 6 – 7 bar Air consumption per cycle: 80 Nl X Axis (Longitudinal) *Useful working stroke: 7210 mm *Continuous torque at locked rotor: 6 Nm *Rapid feed speed: 80 m/min *Acceleration: 1.5 m/s² Y Axis (Transversal) *Useful working stroke: 550 mm *Continuous torque at locked rotor: 6 Nm *Rapid feed speed: 60 m/min *Acceleration: 1.5 m/s² Z Axis (Vertical) *Useful working stroke: 500 mm *Continuous torque at locked rotor: 6 Nm *Rapid feed speed: 60 m/min *Acceleration: 1.5 m/s² A Axis (Rotating Spindle Axis) *Rotation range: ± 180° *Continuous torque at locked rotor: 6 Nm *Positioning speed: 90°/s *Acceleration: 1.5 m/s² Electrospindle *Maximum speed: 24,000 rpm *Rated power (S6 60%): 9 kW - 10 HP *Tool holder type: ISO 30 Tool Magazine *Tool positions for drilling and milling: 7 *Maximum tool diameter: 16 mm *Tool holder + tool length: max 150 mm *Saw blade positions: 1 *Maximum external saw blade diameter: 200 mm Additional Features *Internal saw blade diameter: 22 mm *Tool holder + tool length: max 150 mm *Machine weight: 3500 kg Machine Dimensions Bodpsxfr Hdsfx Aa Dsdb *Length: 9500 mm *Width: 2200 mm *Height: 2600 mm *Total weight: 4600 kg

Condition: good (used), Year of construction: 1999, Vertical Machining Center / EUMACH MC 1050 P - CE marking - Year of manufacture: 1999 - Heidenhain 426 Bdedsx Ihh Ejpfx Aa Djb - Fourth axis NIKKEN CNC 170 ZA / programmable directly via the control unit - Oil cooler - Complete documentation - FULL TECHNICAL DATA – SEE PHOTOS Dimensions: LxWxH 2.8x3.45x2.8 meters / Weight 6500 kg Errors and omissions excepted.

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Bodpfx Aaet A A Aqo Dedb

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Control: Fanuc Series 31i-Model A5 Chain tool magazine: 48 positions Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Chip conveyor Bdedeyw I Htjpfx Aa Deb Note: Clara extraction unit is not included in the scope of delivery.

Condition: new, total length: 5,080 mm, Year of construction: 2025, load capacity: 50,000 kg, Crane Bdedpfxeythxyj Aa Djb JMG MC 50000TE Drive Electric Year built 2025 Lifting weight (kg) 50,000

Condition: used, Year of construction: 2002, We offer this used Finnsonic MC-360/III ultrasonic cleaning machine, year of manufacture 2002. Bsdpfx Asywua Tsa Dsdb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 18i-MB5 Main Drive Bjdpfxjx D E Rms Aa Dodb Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 21 kW Tool taper HSK 63 Movement X-Axis Movement 1000 mm Z-Axis Movement 360 mm Y-Axis Movement 400 mm This 3-axis STAMA MC 526 vertical machining center was manufactured in 2008. It features a Fanuc 18i-MB5 CNC, twin-spindle with double tool changer, and a high-pressure coolant system. The machine offers a spindle speed of 12,000 rpm, spindle power of 21 kW, and a tool capacity of 60. X/Y/Z travels are 1000/400/360 mm respectively. If you are looking to get high-quality milling capabilities consider the STAMA MC 526 machine we have for tact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area Bodpfx Aajx D I Hkj Dedb • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 6,200 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, tool weight: 5,000 g, number of axes: 4, This 4-axis STAMA MC 326 vertical machining centre was manufactured in 2011. It features a travel of 700 mm in the X-axis, 400 mm in the Y-axis, and 360 mm in the Z-axis. The machine is equipped with a spindle power of 18.5 kW and a tool magazine capacity of 48 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 326 machine we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 60 m/min • Feed rate: 1–10,000 mm/min • Acceleration: X/Y 5 m/s², Z 12 m/s² • Spindle: up to 300 Nm • Tool magazine: 48 tools; max tool Ø 88 mm; max tool length 300 mm; tool change approx. 2.4 s • Rotary table: diameter 180 mm (NC 4th axis) • Coolant system: tank 900 L; filtration 50 µm; pressure up to 25 bar • Hydraulics: 250 bar • Compressed air supply: 6 bar • Connected load: 28 kVA • Power supply: 3 × 400 V / 50 Hz Bdedjymduwjpfx Aa Dob Additional equipment • Rear chip conveyor • NC rotary table (4th axis), Ø 180 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 3,750 rpm, total height: 2,100 mm, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 2, This SPINNER TC 82 -MC was manufactured in 1998. A robust horizontal turning machine featuring a Siemens Sinumerik control system, it offers a max turning diameter of 400-520 mm and length up to 1100 mm. With a spindle speed of 3750 rpm and a 12-position VDI 40 turret with live tooling, it's ideal for precise turning tasks. Dimensions are 4200 × 2000 × 2100 mm. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Bdjdpfxjyar Ixe Aa Deb • Max turning diameter: approx. 400–520 mm • Max turning length: approx. 1100 mm Extra Information Machine still under power Dimensions Machine Depth 4200 mm