Used Variable 15 Kw Screwcompressor for sale (47,642)

Condition: new, Year of construction: 2026, ♻ P series pre-shredders with high quality cutters and low rotation speed for a lower energy consumption and maximum productivity. Perfect shape and design for shredding wood Prjdpeic U Dfsfx Adloc pallets, plastics, styrofoam or similar materials. ✔ Power: 1 x 5,5kW + 1 x 9,2 kW ✔ Shaft length: 1580 mm ✔ Shaft diameter: 355 mm ✔ Shaft RPM: 5,3/10,3 rpm ✔ Number of cutting knives: 12/12 ✔ Granulation: - ✔ Capacity: up to 60 pcs./h ✔ Material discharge opening: - ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 1560 x 800 mm ✔ Dimensions L/W/H: 3,45/1,08/0,51 m ✔ Weight: 1400 kg Without mounting components and hopper 2 years warranty or 2000 working hours

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry Prsdpfeiuznusx Adlsc - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: new, empty load weight: 450 kg, maximum load weight: 850 kg, overall weight: 1,300 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 195/55r10c, *Car trailer* with tilting function, featuring a *mesh side extension* and 100 km/h approval, manufactured by *trailer manufacturer* STEMA, type MUT O2. The stable *mesh side extension* makes this *box trailer* suitable for transporting *garden waste*, *small furniture, firewood, lawnmowers, ATVs, and small machines*. As standard equipment, the *steel trailer* features a *crank for tilting the loading platform*, a *ramp*, *100 km/h approval*, a *support wheel*, eight *tie-down points*, *high-quality latches*, *galvanized side panels, hot-dip galvanized mesh side extension*, and a *V-shaped drawbar*. This *car trailer* is also available in various versions, for example as a *covered trailer* or in an open version. Prodpfx Adjiwh Nmoloc We also offer accessories such as *side panel extensions*, *tarpaulin and frame*, *flat tarpaulin*, *drawbar box*, cargo net, *drawbar protection cover, anti-theft device, and tie-down straps* at attractive prices.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Fiber Laser cutting machine FLV-3015-C2 3kW IPG / VF1530-3000W Specifications - Maximum sheet size: 3000 x 1500 mm - X/Y positioning accuracy: ±0.05 mm/m - X/Y positioning repeatability: ±0.03 mm - Maximum travel speed: 120000 mm/min - Maximum acceleration: 1.5 G - Motor power output: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Input voltage: ~3×400 V 50 Hz - Ingress protection rating: IP54 Cutting thickness - Carbon steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Structure The machine is very stable due to its welded structure on massive legs. Fuji Japanese servo drives with robust bevel rack and pinion drive ensure high speed and exceptional accuracy of the cutting head. The ABL system automatically replenishes the grease in the rails. RayTools cutting head with auto-focus. Control panel The control of the fiber laser occurs is carried out via the control panel with keyboard and mouse. The computer includes the Windows system and CypCut software, which comes with functions such as: - part programming, - file import and export, - adjustment of power output and cutting speed. Installed software has lifetime licenses Wireless remote The control of the laser head is carried out by a wireless remote control. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, each purchased machine includes a Specialist Assistance Package with dedicated hours of expert guidance. Within the service, our technicians may: - Prepare or redesign CAD drawings, - Advise on material and gas selection, - Assist in the selection of operating parameters for different materials. The remaining time can be checked in the Otinus Customer Panel. Prsdpfsh Hfgyjx Adlsc Free drawing package Each Otinus laser cutter includes a comprehensive set of ready-to-use CAD drawings. The designs included are ready-made as they can be immediately cut in any format. Our technician will show you how to do that during training. The drawings will be useful to anyone who wants to make various types of decorative items. Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Price-included 2-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: ready for operation (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Psdpfx Adogfbytjljrc We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of delivery includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,000 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight/piece: approx. 10.000 kg The CS Sigma profiles may be bent or have slight damage or signs of rust. Our services at a glance: (Prices upon request) Assembly and installation Please note our general assembly conditions. Rack inspection Rack inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Condition: new, Year of construction: 2024, HD-F Fiber Laser Cutting Systems Durma fiber laser cutting machines are characterized by faster cutting speeds and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting systems, you receive quality, performance, and efficiency simultaneously, which increases the value of your company. Thanks to highly precise Helis gears, very high acceleration values (28 m/s2), a high travel speed (170 m/min), and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design, and efficient and user-friendly structure. X-axis: 6000 mm Y-axis: 3000 mm Z-axis: 125 mm Podpfx Asg Adu Hsdljrc Max. sheet size: 6048x2024 mm Max. sheet weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: +0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet layer detection, measurement The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Fiber Laser cutting machine FLV-3015-C2 20kW Specifications - Maximum sheet size: 3000 x 1500 mm - X/Y positioning accuracy: ±0.05 mm/m - X/Y positioning repeatability: ±0.03 mm - Maximum travel speed: 120000 mm/min - Maximum acceleration: 1.5 G - Motor power output: 20.0 kW - Energy consumption: 73.0 kW - Source brand: Raycus or MAX Photonics to choose from - Input voltage: ~3×400 V 50 Hz - Ingress protection rating: IP54 Cutting thickness - Carbon steel: recommended thickness 35.0 mm, maximum thickness 35.0 mm - Stainless steel: recommended thickness 25.0 mm, maximum thickness 25.0 mm - Aluminum: recommended thickness 18.0 mm, maximum thickness 18.0 mm - Brass: recommended thickness 18.0 mm, maximum thickness 18.0 mm Structure The machine is very stable due to its welded structure on massive legs. Fuji Japanese servo drives with robust bevel rack and pinion drive ensure high speed and exceptional accuracy of the cutting head. The ABL system automatically replenishes the grease in the rails. RayTools cutting head with auto-focus. Control panel The control of the fiber laser occurs is carried out via the control panel with keyboard and mouse. The computer includes the Windows system and CypCut software, which comes with functions such as: - part programming, - file import and export, - adjustment of power output and cutting speed. Installed software has lifetime licenses Wireless remote The control of the laser head is carried out by a wireless remote control. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, each purchased machine includes a Specialist Assistance Package with dedicated hours of expert guidance. Within the service, our technicians may: - Prepare or redesign CAD drawings, - Advise on material and gas selection, - Assist in the selection of operating parameters for different materials. The remaining time can be checked in the Otinus Customer Panel. Free drawing package Each Otinus laser cutter includes a comprehensive set of ready-to-use CAD drawings. The designs included are ready-made as they can be immediately cut in any format. Our technician will show you how to do that during training. The drawings will be useful to anyone who wants to make various types of decorative items. Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Podstixt Hepfx Adljrc Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A Prsdpoxfvldsfx Adloc cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Year of construction: 1970, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. It is mainly used for metals to assess fracture toughness under dynamic loading. * Psdpsxu Dwyefx Adljrc

Condition: used, Atlas Type: SC 350 MHG Psdpfsziizmox Adljrc Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), mileage: 230,261 km, power: 110 kW (149.56 HP), first registration: 12/2016, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,350 mm, total width: 2,210 mm, total height: 3,300 mm, loading space length: 4,180 mm, loading space width: 2,110 mm, loading space height: 2,240 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, tachograph, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Reversing camera - Fabric = Notes = Configuration: 4x2, dual tires, payload: 395 kg, unladen weight: 3105 kg, gross vehicle weight: 3500 kg, trailer load, unbraked: 750 kg, trailer load, center axle, braked: 3500 kg, trailer coupling, cabin type: single cab, tachograph (control unit), air conditioning, number of airbags: 1, parking assist: None, electric windows, electric mirrors, radio/cassette, color: black, heated mirrors, reversing camera, lighting type: halogen lamp, Bluetooth, engine power: 110 kW (148 hp), number of cylinders: 4, displacement: 2998 cc, fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, side wall paneling, roof rack: None, rear closure: tail lift, central locking, number of seats: 3, seat arrangement: 1+2, seat upholstery: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, tail lift capacity: 1000 kg, tail lift manufacturer: Anteo, tail lift material: steel and aluminum, tail lift size: 230x218, 3.0L box van with tail lift, air conditioning, dual tires, Euro 6!, tire type: summer tires = Additional Information = Axle configuration Tire size: 195/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread depth left: 7 mm; tire tread depth right: 7 mm Axle 2: dual tires; tire tread depth left, inside: 3 mm; tire tread depth left, outside: 2 mm; tire tread depth right, inside: 3 mm; tire tread depth right, outside: 2 mm Weights Unladen weight: 3,105 kg Payload: 395 kg GVW: 3,500 kg Functional Tail lift: Anteo, tailgate, 1000 kg Height of loading area: 94 cm Maintenance APK (technical inspection): valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Prsdpszx R Erjfx Adlec Number of keys: 1 Identification License plate: V-602-BV

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Predoz Szalepfx Adloc Mains connection: 400 V Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Hansa Flex, hydraulic unit type HKK0770105A045 -Motor: 5.5 kW -Pressure: up to 170 bar -Flow rate: 6 l/min -Hydraulic reservoir: 45/30l / with level indicator Prjdpfx Aez Szcmedlsc -Individual components: see photos -Dimensions: 945/470/H810 mm -Weight: 120 kg

Condition: good (used), mileage: 58,636 km, power: 110 kW (149.56 HP), first registration: 01/2023, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,050 mm, total width: 2,280 mm, total height: 3,180 mm, loading space length: 4,260 mm, loading space width: 2,190 mm, loading space height: 2,170 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Lane keeping assist - Fabric = Notes = Configuration: 4x2, dual tires, payload: 715 kg, unladen weight: 2785 kg, gross vehicle weight: 3500 kg, cab type: single cab, cruise control, air conditioning, number of airbags: 1, parking assist: None, electric windows, electric mirrors, radio/cassette, Carplay, GPS navigation, color: multicolored, maintenance manual, heated mirrors, lighting type: halogen lamp, lane keeping assist, air conditioning, Bluetooth, engine power: 110 kW (148 hp), number of cylinders: 4, displacement: 1950 cc, fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: additionally extended, side wall paneling, step at the rear, roof rack: None, rear closure: roller shutter, central locking, number of seats: 3, seat arrangement: 1+2, seat cover: fabric, seat adjustment: manual, tail lift, tail lift design: tailgate, load capacity of the tail lift: 750 kg, tail lift manufacturer: Dhollandia dhlm.08, tail lift material: steel and aluminum, tail lift size: 160x218, box van with tail lift, dual tires, Mbux10 Euro6 150 hp!, spare wheel, spare wheel tread depth: 4 %, tire type: summer tires = Additional Information = Axle configuration Tire size: 195/75R16 Prjdpfx Aozhgcrodloc Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread depth left: 3 mm; tire tread depth right: 4 mm Axle 2: dual tires; tire tread depth left inner: 7 mm; tire tread depth left outer: 7 mm; tire tread depth right inner: 7 mm; tire tread depth right outer: 7 mm Weights Unladen weight: 2,785 kg Payload: 715 kg GVW: 3,500 kg Functional Tail lift: Dhollandia dhlm.08, tailgate, 750 kg Height of the loading area: 93 cm Maintenance APK (technical inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 560 € per month (delivery van, 72 months); ask for further information and conditions Identification License plate: V-95-RBP

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. Psdsz S U Rdjpfx Adlerc - Protection 16 A. - Own weight 670 kg. Like new. 2 units available for sale.

Condition: good (used), Year of construction: 2005, For sale: Remak 29.5 kW. In good working order. Pedpfx Adsz Sk Hisljrc

Condition: ready for operation (used), Beckhoff CP6902-0021-0000 Economy built-in control panel 15" SN:3206190-006, used, good condition, 100% functional, scope of delivery as per photos Predstvcr Nspfx Adlec

Condition: excellent (used), For sale: Lenze GST04-2B VCK071-32 gearbox with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. It shows normal signs of wear and tear consistent with use. Its robust construction and high torque make it ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: Lenze Gearbox model: GST04-2B VCK071-32 Psdoz Sngtopfx Adlsrc Motor manufacturer: Lenze Motor type: MDEBA1M071-32 Power: 0.37 kW Supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1360 rpm Output speed: 44 rpm Gear ratio: i = 31.6 Output torque: 79 Nm Ingress protection: IP54 Insulation class: F Operating mode: S1

Condition: excellent (used), For sale: a Lenze Extertal geared motor / Germany, with a GST04-2M VBR071C42 cylindrical gearbox and an MDEMA1M071-42 three-phase motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good – it only shows normal signs of wear resulting from use. The geared motor is ideally suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: Lenze Gearbox model: GST04-2M VBR071C42 Motor type: MDEMA1M071-42 Prodsz Snhqjpfx Adljc Rated power: 0.55 kW Power supply: 3×230/400 V AC, 50 Hz Motor speed: 1405 rpm Output speed: 421.5 rpm Gear ratio: i = 3.333 Torque: 12 Nm Rated current: 2.40 A (230 V Δ) / 1.40 A (400 V Y) Power factor (cos φ): 0.77 Protection class: IP55 Insulation class: F Mounting type: B3 (flange) Standard: EN 60034

Condition: excellent (used), For sale: a three-phase motor with a brake, model SEW-Eurodrive RF32DT80K4BMG/HF/TF. The unit is 100% functional, tested, and ready for operation. Before sale, the motor was thoroughly inspected and operates flawlessly. Pedpfx Adoz Snh Rjljrc The housing shows normal signs of use and some localized paint chipping, as shown in the pictures. These do not affect the proper operation or technical parameters of the device. Technical data: Manufacturer: SEW-Eurodrive Type: RF32DT80K4BMG/HF/TF Power: 0.55 kW Supply: 3×230/400 V AC, 50 Hz Rotational speed: 1360 rpm Motor torque: 10 Nm Gearbox: RF32 Electromagnetic brake: 230 V AC Rated current: 3.05 A (230 V Δ) / 1.76 A (400 V Y) Power factor (cos φ): 0.77 Protection class: IP54 Insulation class: H Operating mode: S1 Weight: 18.57 kg

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Prjdpfoz Sni Ijx Adlsc Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Prodpfx Aoz Snp Ssdlsc Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), For sale: water pump, - BBA B156 TW GMC. - Year of manufacture: 1998. - Engine: 11 kW / 1460 rpm. - Operating hours: 88. - Capacity: 180 m3/h. Prjdez Skxlspfx Adlec - Condition: excellent/like new.

Condition: good (used), Pumpex water pump, 300 m³/h, 7.5 kW Pjdpfoz Skzajx Adljrc

Condition: excellent (used), For sale: SEW-EURODRIVE S30DT71K-2B geared motor with a three-phase electric motor and an integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. This geared motor is perfectly suited for driving conveyors, feeders, production machines, packaging equipment, and other industrial applications. Technical data: Manufacturer: SEW-EURODRIVE Type: S30DT71K-2B Motor power: 0.25 kW Motor speed: 2700 rpm Output speed: 185 rpm Output torque: 10 Nm Power supply: 220 V Δ / 380 V Y Frequency: 50 Hz Rated current: 1.7 / 0.98 A Power factor: cos φ 0.85 Protection class: IP44 Insulation class: B Brake: 220 V Brake torque: 2.5 Nm Predpfxez Snk Ee Adlsc Design: B6AB Lubricant: Mobil Glygoyle 30 Country of origin: Germany