Used V-Shapes Prime Unit Dose Packaging (2021) for sale (64,934)

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782. Ledozzvgaspfx Abzjhl

Condition: used, Year of construction: 2018, HSM V-Press 605 Waste Paper Baler — Used The HSM baler is a compact machine that can reduce packaging waste by up to 95%. It is designed for compressing and baling cardboard (paper bags, waste paper, trimmings) and plastic film (stretch film, plastic bags). It enables cost-effective disposal of these materials. The waste paper baler features a graphical text display showing the machine’s operating status and a large opening for loading waste. All of this contributes to the baler’s ease of use and intuitive operation. Advantages of the HSM V-Press 605 baler: • Compact size – saves space. • Compression force of 57 kN (approximately 6 metric tons)—allows for the formation of bales weighing up to 70 kg with dimensions of 80 x 60 x 60 cm. • Low noise level—60.1 dB(A) • Material-supporting claws – increase the loading capacity, thereby boosting baling efficiency. • Mechanical ejector – facilitates bale removal. • Large waste loading opening – enhances ease of use. Lodpfx Ajzrl I Iebzjhl • Quick and easy installation. This offer applies to the HSM V-Press 605 waste paper baler: • Manufacturer: HSM • Product condition: used • Year of manufacture: 2018 • Model: V-Press 605 • Width: 119 cm • Depth: 81.5 cm • Height: 198 cm • Weight: 485 kg • Power: 1,500 W • Voltage: 400 V Net price: 3,579.00 euros per unit * I have large quantities available; price negotiable for larger orders. * Shipping available throughout Europe. * The above offer does not include shipping costs. * Location: Chmielów/Tarnobrzeg

Condition: used, mileage: 472,000 km, power: 302 kW (410.61 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: soot filter, - Retarder, air conditioning, without EGR Ljdpfx Aoz Efb Eobzohl Suspension: Leaf spring/air suspension

Condition: used, mileage: 1,225,000 km, power: 537 kW (730.12 HP), first registration: 04/2017, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, SCANIA S 730 HIGHLINE FULLY EQUIPPED, SHOW TRUCK, EXCELLENT CONDITION Date of First Registration: Next TÜV (German Technical Inspection): ? (New, including random RDW inspection) Chassis Number: YS2S4X20002131161 Mileage: 1,225,000 km Engine Power: 537 kW (730 hp) V8 Transmission: Automatic Wheelbase: 395 cm Unladen Weight: 9,392 kg Permissible Total Weight: 20,500 kg Color: White and Blue Suspension: Fully air-suspended, air suspension front and rear Emission Class: EURO 6 C Axle Configuration: 4x2 Tire Axle 1: 385/65 L50% R50% Michelin Tire Axle 2: 315/70 L50% R50% Michelin Brakes: 42%, 38% Clutch: 100% Next Service Due After: 38,000 km Fifth Wheel Height: 115 cm Cab Type: S Highline Extras: King of the Road package, Retarder, air-suspended front axle, long wheelbase (395 cm), double glazing, luxury seats, fully upholstered cab (by Kentie Truckspecials), complete sound system with additional speakers, subwoofers, and amplifiers, Pioneer Double-DIN navigation system, 2 camera displays, refrigerator, coffee machine, microwave, air conditioning with climate control, auxiliary heater, 2 beds, spoiler, fender extensions, side skirts, diamond plate platform across the entire chassis, hose bracket, special rear bumper, fully enclosed rear cab panel, double light and air connections, complete bodywork by Kentie Truckspecials, complete service history at Scania, TÜV until /, inspection carried out as part of the main inspection (HU), next service after 38,000 km, at 1,062,000 km, all cylinder heads were removed and the pistons and cylinder liners were replaced by Scania Sassenheim. SCANIA S 730 HIGHLINE FULLY EQUIPPED SHOW TRUCK SUPER STANDARD First Registration: TÜV: Chassis Number: YS2S4X20002131161 Mileage: 1,225,000 km Engine Power: 537 kW (730 hp) V8 Transmission: Automatic Wheelbase: 395 cm Unladen Weight: 9,392 kg Permissible Total Weight: 20,500 kg Color: White and Blue Suspension: Full air suspension, front and rear air-suspended Noise Class: EURO 6 C Axle Configuration: 4x2 Tires Front: 385/65 L50% R50% Michelin Tires Rear: 315/70 L50% R50% Michelin Brakes: 42%, 38% Clutch: 100% Next Service: 38,000 km Fifth Wheel Height: 115 cm Cab Type: S Highline Equipment: King of the Road package, Retarder, Long Wheelbase, Air-Suspended Front Axle, Automatic Transmission, Automatic Climate Control, Auxiliary Heater, Microwave, Coffee Maker, Refrigerator, 2 Beds, Cruise Control, Spoiler, Fender Extensions, Side Skirts, 1,200 Liter Fuel Tank, Air-Suspended Seats, Full Cab Covers (Kentie Truckspecials), Pioneer Navigation System, Special Bumper, Complete Bodywork by Kentie Truckspecials, Many Extra Lights, 2x Air Horns, Warning Lights, Complete Service at SCANIA Workshop, Next Service after 38,000 km. SCANIA S 730 HIGHLINE FULLY EQUIPPED, SHOW TRUCK, EXCELLENT CONDITION First Registration: Valid Until: - Vehicle Identification Number (VIN): YS2S4X20002131161 Mileage: 1,225,000 km Engine Power: 537 kW (730 hp) V8 Transmission: Automatic Wheelbase: 395 cm Unladen Weight: 9,392 kg Permissible Total Weight: 20,500 kg Color: White Further Information: * Payload: 12,708 kg * Height: 3950 mm * Width: 2550 mm * Length: 6160 mm Lhjdpfxszdm Ias Abzel * Type | Front Axle: Michelin R * Tire Size | Front Axle: 385/65 R22.5 * Tire Tread Depth Inside Left | Front Axle:

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20080010, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 5.5 bar, VIBEMAC V700 Automatic Pocket Hemming Unit with Conveyor (2020) High-Speed Automatic Back Pocket Hemming Machine for Denim & Workwear Production VIBEMAC V700 is a high-performance automatic pocket hemming unit manufactured by VIBEMAC S.p.A. (Italy), specifically designed for automated back pocket hemming in denim, jeans, and workwear production. The machine is equipped with VIBEMAC's patented continuous conveyor feeding system, ensuring precise and repeatable hemming results while preventing fabric distortion, waving, or twisting, even when processing heavy denim or stretch fabrics. Finished pockets are automatically transferred to the integrated rotating collection disk via a pneumatic unloading system, allowing continuous high-volume production with minimal operator intervention. The machine was operating in professional garment production until factory shutdown and remains in fully functional condition. Technical Specifications • Manufacturer: VIBEMAC S.p.A. • Model: V700 • Year: 2020 • Serial Number: 20030010 • Country of Manufacture: Italy • Machine Type: Automatic Pocket Hemming Unit • Power Supply: 230 V, Single Phase • Pneumatic Requirement: 5.5 bar • Main Motor: Mitsubishi Electric XL-G554-20Y AC Servo Motor • Motor Power: 550 W • Stitch Type: 2-Needle Chainstitch • Stitch Length: Adjustable 0.9–5.0 mm via control panel • Production Capacity: Approximately 1,800–2,000 pockets per hour Key Features • Patented continuous conveyor feeding system • Designed specifically for automatic pocket hemming • Consistent and repeatable seam quality • Suitable for denim, stretch fabrics, and workwear materials • Pneumatic automatic unloading system • Rotating collection disk with capacity for approximately 600 finished pockets • Adjustable stitch length and sewing parameters • Electronic operator control panel Lsdpfx Abjzgwrhjzohl • Easy-access maintenance design • Heavy-duty industrial construction • Suitable for continuous production environments Includes • VIBEMAC V700 automatic hemming unit • Integrated conveyor feeding and transport system • Automatic rotating pocket collection disk • Mitsubishi AC servo motor • Electronic control cabinet • Industrial machine stand • Pneumatic components • Thread stand and guides Applications • Back pocket hemming • Jeans manufacturing • Denim garment production • Workwear production • High-volume apparel manufacturing • Automated garment component production Condition • Fully functional • Previously used in professional garment manufacturing • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: used, mileage: 685,421 km, power: 345 kW (469.07 HP), first registration: 07/2021, fuel type: gas, empty load weight: 8,142 kg, maximum load weight: 9,858 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 50 %, axle configuration: 4x2, next inspection (TÜV): 05/2026, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, operating hours: 685,421 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, cruise control, navigation system, parking heater, truck registration, Vehicle number for inquiries: 2311 Volvo, FH 460 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, electronic braking system * Refrigerator unit * Leather interior * Air suspension * Navigation system * Auxiliary heater Lodsz D Sl Iepfx Abzshl * Stand-alone air conditioning * Cruise control * Low noise * Long-haul > 7.5 tons * Distance Assist * Lane Keeping Assist * Electric windows + mirrors * 2 bunks * Inspections: MOT / Emissions Test 05.2026 * Transmission: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 18,000 kg * Unladen weight: 8,142 kg * Payload: 9,858 kg * Permissible total weight: 18,000 kg * Tire condition, 1st axle: 50% - 50% - Tire size: 315/70 R22.5 * Tire condition, 2nd axle: 50% - 50% - Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 544,147 km, power: 375 kW (509.86 HP), first registration: 01/2021, fuel type: diesel, empty load weight: 1 kg, maximum load weight: 25,999 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 50 %, axle configuration: 6x2, wheelbase: 2,600 mm, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2020, operating hours: 544,147 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, sliding door, soot filter, spoiler, truck registration, Reference number for inquiries: 41619 MAN, TGX * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, electronic braking system * ESP * Power windows * Cab * Automatic climate control * Refrigerator * Air suspension * Navigation system * Lift axle * Particle filter * Retarder / ZF-Intarder * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Stationary air conditioning * Cruise control * On-board computer * Differential lock * Digital tachograph * Radio CD * Bluetooth * Sound system * Distance control assistant * Lane keeping assistant * OBU preparation * Refrigerator * Electric windows + mirrors * Air horns * 2 beds * 2 x diesel tank * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 26,000 kg * Unladen weight: 1 kg * Payload: 25,999 kg * Permissible gross vehicle weight: 26,000 kg * Tire condition 1st axle: 40% - 40% - Tire size: 315/80 R22.5 * Tire condition 2nd axle: 40% - 40% - Tire size: 315/80 R22.5 * Tire condition 3rd axle: 50% | 50% - 50% | 50% - Tire size: 315/80 R22.5 * Wheelbase: 2600 mm * Tire sizes: 315/80 R22.5 * Rotating beacons * Laser light * Adjustable fifth wheel coupling * ECAS air suspension * MAN Brake Matic * MAN Easy Start * Emergency Brake Assist 2 * Comfort control module * Nordic cab (for cold weather) Lodpfx Abozl Rbaozshl * Ambient lighting * Electric sunblind * Digital axle load display * MAN sound system * Voltage converter Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our homepage. Our comprehensive service includes: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: excellent (used), CNC drilling center, SCM Startech CN V drilling machine Lhodpfozkuzbsx Abzsl Working area: Length X: 300 - 3000 mm Width Y: 90 - 900 mm Thickness Z: 10 - 50 mm Drilling motor power: 3HP 7 vertical drilling spindles, 4 horizontal drills (2 drills on the X-axis, 2 drills on the Y-axis), Notching saw on the X-axis, CNC Maestro software Machine in very good condition, drilling unit and axes operate quietly, Year: 2021, few hours of operation Condition is very close to that of a new machine CE marking Weight: 821 kg

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Lhjdpfx Abey Szb Hszol

Condition: used, mileage: 480,208 km, power: 390 kW (530.25 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, M-Benz Actros Giga Space 1853 Solo Star 4x2 SZM VIN: 523645 Chassis / Components: * Wheelbase 3,700 mm * Full / Air Suspension * Tires: Front 385/55 R.22.5, Rear 315/70 R.22.5 * Condition: Front ~30/20%, Rear ~10% * 2 x Aluminum Tanks 570 L + 430 L * 1 x AD-Blue Tank Cab Equipment: * Giga Space Cab * Solo Star Concept * 2500 mm, flat floor * 2 x Bunks * Refrigerator * Auxiliary Heater * Automatic Climate Control * Stand-alone Air Conditioning Lhedpfx Aoz D Nztjbzel * Radio // CB Radio * BT / AUX / USB * Navigation * Mirror Cam * Adaptive Cruise Control * Lane Keeping Assist * Turning Assist / Side Guard Engine / Transmission: * 390 kW // 530 HP // 12,809 ccm // Euro 6d * Power-Shift 3 // Automatic Transmission * Retarder * Differential Lock Weights: * Gross Vehicle Weight 18,000 kg * Payload 9,820 kg * Unladen Weight 8,180 kg Other: * German truck * TÜV (German Technical Inspection) valid until 01/ * New tachograph DTCO4.1 New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, transport of your purchased vehicles within Germany is possible. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sales, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transport We will gladly help you with the organization of special transport. Day license plates / Export license plates We will gladly help you obtain export/short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: excellent (used), Year of construction: 2015, operating hours: 207 h, functionality: fully functional, machine/vehicle number: 645557, overall weight: 1,111 kg, load capacity: 240 kg, arm reach: 2,696 mm, This is a KUKA KR 240 R2700 prime industrial robot with a KRC4 controller. Ledezk Hzyjpfx Abzehl Year of manufacture: 2015 We would also be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRL-Nexxt RemoteService SafeOperation UserTech

Condition: used, functionality: fully functional, mileage: 328,147 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 Lhsdpfjz Drgfjx Abzol 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 15 mm Rear left outer - 15 mm Rear right inner - 15 mm Rear right outer - 15 mm

Condition: like new (used), functionality: fully functional, mileage: 509,082 km, first registration: 01/2024, fuel type: diesel, fuel: diesel, brakes: retarder, color: grey, gearing type: automatic, suspension: air, number of beds: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fridge, navigation system, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, SCANIA 660 S V8 Registered: 01/2024 Mileage: 509,082 km Full air suspension Retarder Alloy wheels Auxiliary climate control Navigation system V8 leather interior *Price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: Lhsdpfx Absz Dubfezel MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 08:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM MULTIPLE BRANDS: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540- 460 hp - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition - Tautliner - Box - Tail lift - Reefer - Insulated reefer - Van Domenico Truck srl is not responsible for any discrepancies in technical specifications, optional features, or characteristics, which may differ in some cases from those stated in the description. We invite you to verify the characteristics of the specific vehicle.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, manufactured in 1997. POWER SUPPLY INPUT MODULE OUTPUT MODULE Model number: 1746-P2 Series: C Input voltage: 85–132 V AC Input voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Max. user current at 24 V DC: 0.2 A Replacement fuse: 250 V–3 A fuse Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Country of origin: Malaysia Lodeyutfhepfx Abzohl Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), controller manufacturer: ABB, ABB Lodezvyr Aspfx Abzjhl 3HAC029818-001 ABB Type Designation: 55x40x30 Catalog Description: DSQC 663 Drive Unit

Condition: used, functionality: fully functional, machine/vehicle number: XLRTEF5300G415129, mileage: 276,000 km, first registration: 08/2022, fuel type: diesel, tire size: 315/70, tire condition: 50 %, axle configuration: 4x2, brakes: retarder, gearing type: automatic, emission class: euro6e, suspension: steel-air, Year of construction: 2022, Equipment: AdBlue, Bluetooth, EBS, additional headlights, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, traction control, Year: 2022 Mileage: 276,000 km Automatic transmission + ZF Intarder Tires: 315/70 (385) Dual fuel tanks Spoiler, fender extensions, side skirts Parking air conditioning Refrigerator box + drawer Rotating driver's seat Lsdpfx Ajz D Tc Ijbzohl Tires with 50% tread remaining FIRST CHOICE DAF WARRANTY: 12 MONTHS, FULL COVERAGE

Condition: used, functionality: fully functional, mileage: 366,790 km, power: 331 kW (450.03 HP), first registration: 05/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lhjdpsz Eau Hofx Abzel Lane Departure Warning with Active Steering Active Lane Keeping Assist Tyres Information Front left - 14 mm Front right - 14 mm Rear left inner - 8 mm Rear left outer - 8 mm Rear right inner - 8 mm Rear right outer - 8 mm

Condition: new, Year of construction: 2016, functionality: fully functional, Elmo Rietschle / Gardner Denver V-VC 202 Vacuum Pump – New Surplus For sale: 2x Elmo Rietschle / Gardner Denver V-VC 202 vacuum pumps. These units are new surplus stock, unused, and still in their original storage condition. Technical specifications: Manufacturer: Elmo Rietschle / Gardner Denver Model: V-VC 202 (20) Type: Vacuum Pump Capacity: 200.0 / 240.0 m³/h Ultimate vacuum: 0.50 / 0.50 mbar (abs) Motor power: 5.5 / 6.3 kW Speed: 1455 / 1755 rpm Frequency: 50 / 60 Hz Lhodpfxez A Ache Abzel Voltage: 230/400 V (50 Hz) / 265/460 V (60 Hz) Protection class: IP55 Duty cycle: S1 Year: 2016 Made in Germany Condition: New Surplus / Unused Quantity available: 2 units The pumps have been stored as surplus equipment and are offered in the condition as shown in the pictures. Location: Rotterdam, The Netherlands Availability: Immediately available Worldwide shipping can be arranged.

Condition: used, functionality: fully functional, mileage: 226,416 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Lhedpfx Aezrdmpsbzsl Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 7 mm Front right - 5 mm Rear left inner - 7 mm Rear left outer - 9 mm Rear right inner - 7 mm Rear right outer - 8 mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 970356, 970357, type of input current: three-phase, input voltage: 400 V, compressed air connection: 6 bar, input current: 40 A, air pressure: 6 bar, We offer this used Arodo Total Bag-Handling bagging machine, manufactured in 1997. The bagging line includes: - a hopper with a feeder for the material to be packaged - a bagging line (volumetric filling) with printing on individual bags - a line for stacking and gluing bags onto a pallet It was imported to Poland from Belgium in 2016. The palletizer's capacity is up to 1300 bags/hour (the bagging section's capacity is approximately 600 bags/hour). The bags have maximum dimensions of 550 mm width and 950 mm length. The maximum bag weight is 50 kg. The palletizer is automatic and stacks 5 bags per layer. It is designed to work with material with a particle size of 0–40 mm. The line has been in operation for 17 years. Lsdpfx Abjzph Aijzehl Serial numbers: 970356, 970357 Year of manufacture: 1997 Number of phases: 3 phases Voltage: 400 V Frequency: 50 Hz Supply current: 40 A Rated current: 38.8 A Air pressure: 6-9 bar Maximum pallet weight: 1750 kg Maximum bag weight: 50 kg A complete operating manual with technical documentation is available in French and Polish (translation provided). The line can be started up. The price includes training on how to use the line after purchase. If you have any questions or need additional information, please contact us.

Condition: used, functionality: fully functional, mileage: 339,027 km, power: 338 kW (459.55 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,510 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with carbon filter, sun, mist, and air qu Driver Seat: Comfort 5: suspended & heated - belt in seat Passenger seat: Comfort 5: suspended & heated - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower manual recline bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Lsdpfx Abezlcn Sezehl Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Cab Exterior Trim Level Enhanced Complete painted finish - Main Grille, handles, mirrors, bumper in cab colour Side skirts on fuel tanks Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: ready for operation (used), functionality: fully functional, Industrial meat slicing machine for boneless meat Ljdjzv N Rzjpfx Abzjhl The EBAKI 1 V horizontal slicer provides consistent cutting of boneless meats. It is particularly suitable for the poultry industry, but can also process pork, beef, turkey, or certain processed meats. This allows for obtaining multiple fillets or slices parallel to each other from a single piece of meat. This technology meets the needs of cutting workshops, meat processing companies, and manufacturers of processed products. Furthermore, horizontal cutting provides a more consistent thickness while improving the presentation of the finished product. Precise horizontal cutting The product moves between a lower conveyor belt and an upper conveyor belt. These two conveyors hold the meat in place as it passes through the cutting area. Then, the blades perform an alternating movement in opposite directions. This ensures that the product remains stable and the resulting fillets are consistent and parallel. This system also minimizes material loss during cutting. Consequently, it helps to better utilize the meat and standardize portions. Diverse applications The EBAKI range can perform horizontal slicing of chicken breasts, turkey, beef, pork, sausages, or bacon. The manufacturer also offers applications for cordon bleu, cooked chicken breasts, and certain extra-thin cuts. Thanks to this versatility, the machine can be integrated into various production lines. It can be used after the preparation or trimming of the meat. Then, the fillets can be transferred to a marinating, cooking, coating, packaging, or freezing line. Cleaning and production integration The EBAKI design provides easy access to the cutting elements and conveyors. In this range, guides and belts can be disassembled without tools to simplify cleaning and maintenance. The EBAKI horizontal slicer is therefore a suitable solution for companies seeking consistent cutting, better utilization of raw materials, and more homogeneous production. Technical specifications: Brand: EBAKI Model: 1 V Type: Horizontal slicer for boneless meat Year: 2022 Serial number: 22 234 12 20 Power: 1.5 kW Voltage: 400 V Power supply: 3 phases + neutral + ground Frequency: 50–60 Hz Current: 5 A Weight: 460 kg L4MFJ3V6

Condition: used, functionality: fully functional, mileage: 192,567 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Lhjdjzi N Nwopfx Abzel Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 7 mm Front right - 7 mm Rear left inner - 8 mm Rear left outer - 9 mm Rear right inner - 7 mm Rear right outer - 8 mm

Condition: used, mileage: 547,000 km, power: 302 kW (410.61 HP), first registration: 03/2018, fuel type: diesel, overall weight: 21,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Additional information: * Payload: 12577 kg * Height: 3900 mm * Width: 2550 mm * Length: 5960 mm * Type | Front axle: Dunlop R * Tire size | Front axle: 385/65 R22.5 * Tire tread depth (inner, left) | Front axle: 100% * Tire tread depth (inner, right) | Front axle: 100% * Maximum axle load | Front axle: 8000 kg Lodpfsz Dzl Rex Abzohl * Type | Rear axle: Goodyear R * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth (outer, left) | Rear axle: 90% * Tire tread depth (inner, left) | Rear axle: 90% * Tire tread depth (outer, right) | Rear axle: 90% * Tire tread depth (inner, right) | Rear axle: 90% * Maximum axle load | Rear axle: 11500 kg * Wheelbase: 375 cm * Cabin: Yes * Price on request: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Steering | Front axle: Yes * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes Additional features: * 27 MC / CB radio * Aluminum fuel tank * Trailer coupling * Anti-lock braking system (ABS) * Traction control system (TCS) * Automatic transmission * Automatic climate control * Heated mirrors * Bluetooth * On-board computer * Camera connection for trailer camera * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * Electronic Stability Program (ESP) * Website * Air conditioning * Refrigerator * Air suspension * Air-suspended seats * Metallic paint * Fog lights * Parabolic suspension * Particle filter * Radio/CD player * Rain sensor * Retarder * Disc brakes * Sunroof * Sleeper cab * SemCollection * Side skirts * Sun visor * Spoiler * Auxiliary heater * Central lubrication system * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 Lhjdpfx Aboy U H Idozel === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.