Used Topper Tmw-850 for sale (2,266)

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h Bedpfxswtct Hs Amrsln tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Bedpfou N Agkox Amrsln Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! *

Condition: used, Year of construction: 2013, Manufacturer: GEA Model: OptiDipper 650 Year: 2013 Condition: Used Serial Number: 87 Stock Number: 3254 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Bsdpfsz Ei Icsx Amrsln Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions; 3850 x 1400 x 1350 mm Weight: 850 kg

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Bjdpfx Asxf Uzkemrjln Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: used, Year of construction: 2013, Brand : GEMINIS Model : GT5 G2 1200x1000 Manufacture year : 2013 Cnc : SIEMENS 840D-SL Center height: 615 mm Swing over cross slide: 850 mm Bedpfx Amezn Axierjln Swing over bed : 1200 mm Main spindle bore diameter: 104 mm Main spindle nose: DIN 55026-11 mm Spindle diameter on front bearing:150 mm Turning Speeds : 0-1400 rpm Spindle Ranges: 4 Headstock power: (S1/S6-60%) 30/37kw – (37/46kw Optional) Headstock torque: (S1/S6-60%) 4000/4850 Nm (4800/5950Nm) Guide width: 655 mm Height up to the plane guide: 800 mm

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 Bsdpfxjvn Ur Ej Amrsln max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: used, power: 2.2 kW (2.99 HP), pivoting range: 45 °, total height: 2,250 mm, total length: 1,300 mm, total width: 850 mm, overall weight: 500 kg, No. 04532 Band saw Kölle BG 63 Used Wheel diameter 630 mm Motor power 2.2 kW Saw blade length 4340 - 4500 mm Table dimensions 680 x 645 mm LW Saw table tiltable 0° - 45° Upper saw blade guide with guide rollers Dust extraction connection Incl. 3 spare saw blades Incl. operating manual Transport dimensions on pallet approx. 1300 x 850 x 2250 mm LWH Weight approx. 500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Bedpfjz Eu Tdex Amroln Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Ruchser standard offering with layout for a wooden window manufacturing process, including profiled glazing bead and screw-connected corner joints. ----- Daily capacity: approximately 30 windows Manufacturing process consisting of: Item 1.0 - Article 107850000 ----- 1 piece RU-PWD-H1600/130/4 profile rack, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cut-to-size pieces. 12 support arm pairs per column, permanently welded to the column, 2 center columns adjustable, clear distance between support arms 130 mm, depth of support arms per side 400 mm, support arms with felt padding, with 4 swivel castors, diameter 150 mm, 2 of which with locking mechanism. Item 2.0 - Article 10776000 Bedpfoytx Ulsx Amreln ----- 1 piece RU-MSTR assembly station for frame hardware 3000 mm long, 600 mm wide 1 piece shelf for hardware 1 piece support table with felt padding Work height adjustable between 900 - 1100 mm (Without screw units) Item 2.1 - Article 6747 ----- 1 piece guide rail with carriage, 3000 mm long Item 2.2 - Article 6308 ----- 1 piece balancer for tools, 3 to 5.5 kg Item 2.3 - Article 10778000 ----- 1 piece RU-STS-A screw feeder with automatic screw feeding system POWASERT, consisting of screw feeder and feeder unit ADS-MF4, complete with hose connections, screw feeder ADS 2445 RD with torque cut-off. Set to the screw guide used by the customer. Suitable for the following screw dimensions: Shank diameter: 2.4 - 4.0 mm Shank length 10 - 35 mm Head diameter 5 - 8 mm When ordering, information about the screw must be sent to the manufacturer's factory. Item 3.0 - Article 10782000 ----- 1 piece RU-EW-2S storage rack, double-sided Storage capacity max. 36 pieces of frame profiles in L-shape, screwed together, length 1200 mm, depth 800 mm, height 2200 mm, support beams with felt padding, 4 swivel castors, 2 of which with stoppers Item 4.0 - Article 10766000 ----- 1 piece RU-DR-1 rotary table with travel mechanism for frame assembly. Table with parking brake. Support platform with crossbars and one pull-out section each to the left and right with felt padding. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, work height 900 - 1100 mm adjustable Item 4.1 - Article 5360, permanently mounted tool storage 1000 x 400 mm for RU-DR-1 Item 4.2 - Article 6354 ----- 1 piece 3-meter travel rail for travel mechanism, rail 10 mm high Item 4.3 - Article 6454 ----- 1 piece travel mechanism with flanged wheels and parking brake Item 4.4 - Article 6788 ----- 1 piece corner screwing device, 1 pair of pneumatically height-adjustable clamping units for fixing the profiles at a right angle. Item 5.0 - Article 10383000 ----- 1 piece RU-DK-T14/34 rotary tilting table with pneumatic tilting mechanism. Work platform with 4...

Condition: excellent (used), CATALOGUE NUMBER 8026 TECHNICAL DATA - max. cutting length 3100 mm - max. cutting height 80 mm - max. cutting width 570 mm - main saw motor power 10 kW - blade diameter 450 mm - work table height 850 mm - work table width 660 mm - dust extraction nozzle diameter 1x160 mm, 1x170 mm - overall dimensions (length/width/height) 5500x2100x1600 mm - weight approximately 2500 kg ADVANTAGES – for trimming boards – used saw, very good condition Bedpfxozw Dkfo Amroln Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, functionality: fully functional, machine/vehicle number: 33051, mileage: 23,900 km, power: 235 kW (319.51 HP), first registration: 02/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.6 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Bljdpfx Amez E Nxnorjn Engine D0836LFLBI, reinforced clutch, MAN Tipmatic 12 12 ODr, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with adjustable stages, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-installation for Toll-Collect, digital tachograph CONTI, connectivity board module (RIO box), sun visor on the driver's door, sun shield horizontal tank, tank wall thickness 6 mm, total air volume approx. 11.6 m³ (sludge chamber approx. 9 m³ / water chamber approx. 1 m³), 1x piston lock, piston with 2 piston seals and seal pressure regulation, water chamber welded into the front of the tank with inspection opening, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, rear flap hydraulically opened upwards over the entire cross-section with pipe rupture protection, manual lid locking by means of toggle closures, sludge chamber level indicator with external scale with graduation every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blanking cap, stainless steel discharge chute, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the operator platform, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 60 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are installed, spray gun, operator platform made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left of the tank, 1x LED rotating beacon at the rear, reversing camera.

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Blsdpfx Ajz Ha Ivjmron Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the

Condition: used, empty load weight: 3,500 kg, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 08/2018, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: other, tire size: 205/65R17,5 ---/126J, color: other, gearing type: other, front tire size: 205/65R17,5 ---/126J, rear tire size: 205/65R17,5 ---/126J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 600 mm side walls, front wall 1,200 mm high, loading height approx. 850 mm, twin tires, 10 x lashing eyes, customer vehicle, , --  Subject to printing errors, mistakes and changes, sample images --, More data at: !, More details: ! Bljdpfx Amoz Hi Aceron

Condition: used, Year of construction: 2021, Year: 2021 Condition: very good Counter: approx. 3,640,000 Bljdpfoz Hcq Hex Amron Technical Specification: - Min./Max. sheet size: 80 × 100 mm / 360 × 650 mm (optional extended feeder: up to 360 × 850 mm) - Paper weight range: 80–400 g/m² - Programs: 20 programmable jobs - Minimum crease distance: 0.1 mm - Speed: up to 6,000 sheets per hour (A4 with 1 crease) - Power supply: 230 V / 50 Hz single phase - Power consumption: 1.5 kW - Weight: 116 kg - Dimensions: 40 × 65 × 116 cm - Optional accessories: perforation kit; extended feeder Equipment Description: The PIT STOP 36 is an automatic creasing and perforating machine with a working width of 36 cm, maintaining all the reliability and precision characteristics typical of machines manufactured by Bacciottini Group. The standard sheet size is 360 × 650 mm, with an optional extended feeder allowing processing of sheets up to 360 × 850 mm. The machine has been specially designed for print-on-demand applications and digital printing workflows. It is equipped with a creasing system using an adhesive matrix. The machine features a user-friendly 7-inch colour touchscreen display, allowing quick and easy setup of all creasing and perforating operations. The unit is mounted on wheels for easy mobility and helps maximize workspace efficiency, especially in areas where space is limited.

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock Bljdezf N Rgopfx Amren

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Top condition, low operating hours (1540 hours of eroding time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional control unit Manual eroding with Powertec handheld Blodpfx Aeyzxd Demron EAGLE Powertec - fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High Speed Jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, Type UPC Production Chuck CO2 fire extinguishing system September 30.

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Bsdpfx Amez Hnzkerjln Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Bedpjmhm Ausfx Amreln Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. Bedpfogazl Ujx Amrsln The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Bledsgazmkepfx Amrsn Other dimensions available.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm Bjdpfx Aega Nh Hjmrsln With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Bjdpfsgp Dymsx Amroln Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter Bjdpjyv I Hwjfx Amreln

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding Bedpsxwzd Nsfx Amreln - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Bedjvu Hccjpfx Amrjln Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: used, Year of construction: 2015, pressure 30 t stroke 300 mm daylight between the columns 700 mm dayligth 850 mm 140 mm diameter of piston 60 mm table surface area 700 x 390 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device Bsdpfx Aoy Umbwjmroln