Used Toothed Pulley for sale (1,033)

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Guodpfxeyhckms Aa Eed Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Gedpfx Aaeynzg He Eeud Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Godpfxoy En E Sj Aa Ejud Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. Guedpfx Aasx D If Te Eed • Base frame • Accessories for base frame • Hydraulic fittings • Unit carrier (left) TK420 • 108 bores • Pipe (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective hood • Form turning unit - material guide • Guide axis • Cover plates with empty stations • Milling unit with NC feed • Clamping with toothed belt pulley z1=16 • Toothed belt pulley Z1=16 • Toothed belt pulley Z2=20 • Toothed belt 25 AT10 / 730 • Hydraulic power unit 70 100 04358 32 dm³/min • Central lubrication • Deflection plate T - T Additional equipment • Part ejection console • Straightening and feed rollers • Clamping change parts station 1 • Tools and tool holders • Operating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon socket • Face turning head PCD 100-01-101 • Length control with pneumatic cylinder and laser • Reel support (Star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) • 24-volt filling unit integrated with emergency stop valve • DA 300 compressed air maintenance system

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. Guodpfxjvtwzms Aa Eod The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: refurbished (used), functionality: fully functional, - Bedeschi RS toothed crusher; - Haendle WMZ toothed crusher 412 A; - GHH 2366 WH 75/60 impact crusher; - Alfa paper shredders; Sawdust grinder, Wood chipper - Haendle HM2080 wet pan mill; - Haendle HM2080a wet pan mill - Breitenbach fine roller mill type PWF 812 800*1200, gap from 0.6 mm, roller shell thickness 95 and 105 mm, drive 90 kW, drive pulley ⌀650, motor pulley ⌀224, productivity at a gap of 0.6-0.8 mm: 40-50 t/h; - Haendle fine roller mill type Alpha WFZH8100b. Commissioned in 1996. Not in operation since 2012. Gap adjustable from 0.6 mm. New roller shells installed. Bearings replaced with the participation of Haendle specialists; - Kema roller mill 1000x800, gap 1-3 mm; - Rieter fine roller mill type GSA 1000x800, gap 1-1.5 mm; - Rieter-Werke Haendle roller mill type HW 80х80-HM, gap 0.6 mm; Gujdpfx Aaoyl Tmms Eed - Haendle mechanical roller mill type WFZ 880A, gap 0.8 mm, 42 t/h

Condition: new, components: 4 x clear glass panel L=418 B=568 S=6 2 x clear glass panel 3 x opal glass panel 1 x SEW Eurodrive SA47 AH90 1 x Continental STD 672 58M + belt gear 2 x CEDS Duradrive DAPE-0410.04400.00 1 x lamp unit 1 x computing unit 1 x Seiffert Systems Linatronic cooling unit incl. montage kit 4 x sawtooth belt 25 HTD 48M 2352 1 x 8 pole cable M12 plug + shielding 1 x system bus cirquit board 1 x valve control unit 8 x camera head Linatronic 2 x toothed belt HTD 1760 8M 30 Z=220 1 x protective glass for lamp unit 2 x protective glass panel 1 x frame seal 2 x frame seal 2 x frame seal 4 x Adjustable flow station 1 x Hirschmann RS20 Rail Switch 3 x Linatronic control computer 1 x Siemens Simatic Net CP AS-Interface + replacement PCB 1 x Siemens Sitop modular 40A 1/2 pn 1 x ground lens 1 x White LED ring light 1 x cylinder valve unit 1 x replacement magnetic valve for cylinder valve unit 1 x small controller unit 1 x DC/DC converter 1 x DC/DC converter 1 x Input/Output module 1 x safety relais 1 x IFM elecronics distributor module AC2500 2 x relais 3sec 24v type b 1 x oil seal ring 1 x tensioner pulley 36 x pressure spring 1 x Futaba mini servo S3107 4 x ball bearing cx 16007-2RSLG622 3 x gas spring 2 x ring brush 2 x toothed belt HTD 10T 5x1380mm 2 x Festo CPV10-GE-ASI-4E4A-M8 1 x LED lamp contour RGB 1 x LED lamp wall 2 x roller guide 1 x ZAE gearbox 90-1094-14-1a i=14,5:1 Gsdpfx Aajhw E Rqo Eoud Individual and partial purchases are also possible. We will be happy to send you further information on the components on request.

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Godpfxexrk Ito Aa Eoud Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Support frame for mill and motor, complete with connection for aspirated discharge.

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). Gsdpehq Uklefx Aa Eoud 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, Gjdpjyyqnlofx Aa Eeud axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including Gujdoxz Hh Uepfx Aa Ejd spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: good (used), Code: 0300 Brand: CASADEI INDUSTRIA Model: V320 - CE Standard Automatic edge bander for pre-glued edges, for carpentry, furniture, custom-made furnishings, doors, panels and various items - CE Standard Features: Automatic upper feeder with toothed belt, speed 5 mt/min, height adjustable by means of handwheel with numerical position indicator Infeed guide Pneumatic coil cutting shear Automatic front and rear pneumatic end trimmer Upper/lower end trimmers at 11000 rpm with cutters Z4 Work surface 1800 mm with 7 adjustable rollers and polyzene slide guides Extendable front support for large panels Technical data: Min/max panel thickness 10-45 mm Edge thickness in coil 0,4-2 mm Min panel length 220 mm Min panel width 110 mm Gluing unit: Blower power LEISTER W 3400 - Temperature adjustment Gedpfx Aaoyk Hgks Ejud Total installed power 2 kW Suction port diameter 120 mm Overall dimensions mm 1800 x 700 x 1300 h Weight kg 236

Condition: good (used), Code: 0445 Brand: LANDONI - ITALY Model: AGM 1 - CE Standard Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes Technical data: Straight-tooth chain DLC-type with pitch 1" Chain tensioner for automatic chain tensioning Guide bar lenght cm 240 Useful cutting cm 200 Electric motor Hp 12,5 three-phase Gsdpfxszl Dn He Aa Ejud Automatic oiling of the chain Overall dimensions: mm 1800 x 900 x 3000 h Dimensions for transport: mm 3900 x 900 x 1900 h Weight kg 300

Condition: excellent (used), Catalog number 6765 Guodezlrnuopfx Aa Eed TECHNICAL DATA - max width of workpiece 230mm - max height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable left/right from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm from above: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed rollers, rubber, 2 pcs from below: - infeed roller, toothed, metal, twisted in the lower bed + - outfeed roller, metal, smooth - rollers pneumatically adjustable - length of infeed bed (with pneumatic feeder) 3390mm - possibility of operation without engaging the pneumatic feeder, - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - smooth adjustment of feed speed - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions L/W/H 7000x1950x1700mm, - weight approximately 3000kg - for wet and dry wood - pneumatic feeder on the infeed table, - planer used, very good condition Net price: 65900 PLN Net price: 15690 EUR Net price calculated based on the exchange rate of 4.2 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Gedpfxozlp Rts Aa Eoud Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm -Toothed shaft: Ø 30/27 mm, dimensions see photos Gedpfx Ajzld Nksa Esud -Number: 2x couplings available -Price: per piece -Dimensions: Ø 115 x 150 mm -Weight: 4.4 kg/piece

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Tooth pitch 20 - 50mm Gedpfsglui Aox Aa Eoud

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Guedpfxsih Dxde Aa Ejd Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Gjdpfxodqy Uqs Aa Eoud Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Gsdocnxayspfx Aa Ejud Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Guedscnxa Sspfx Aa Ejd Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Guedpsff Efaofx Aa Ejd Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Guodohkz E Tepfx Aa Eed Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Gsdpfx Aoff Hdpea Esud Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Gujdslht Htopfx Aa Eed Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -