Used Titech Tomra Optical Separator for sale (9,800)

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, the machine delivers an enormous throughput with its 4 shafts! Csdpfx Ajyf Au Holberg Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc., while simultaneously crushing soil clumps. Aerating, shredding, tearing, turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc. that cannot be crushed. Crushing easily breakable stones in construction debris such as pumice, bricks, Poroton blocks, while simultaneously separating the chunks. Larger and harder parts remain in the separator. Feeding lumpy soil to a screening plant reduces waste and increases throughput. Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.128

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132 Crjdpfoyf Avdex Albjg

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001 Csdoyf A Erjpfx Albjrg

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crsdpfx Aljzcr N Ujbog Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) Crsdpfx Aezixzijlbeg EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMC 80 FD duoBlock Year of manufacture: NEW Control system: Celos with Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1050 mm Z-axis: 850 mm Main spindle: Tool interface: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Codpfxoy U Hlpj Alborg Tool changer: Number of tool positions: 123 Technical features & accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotating pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist separator system - Chip conveyor - Rotating viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Control panel for the tool magazine of the loading station with a 15-inch TFT screen - Internal coolant system (IKZ), frequency-controlled 10 bar – 80 bar / 31 l/min through the spindle center (AD) - Flushing gun for chip flushing - Cooling device with compressed air through the spindle center - Optical infrared probe Renishaw PP60 (OMP 60) - Tool measurement in the work area Blum Laser DIGILOG - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS spindle growth sensor, IKZ flow monitor - Condition Analyzer - proTIME - 4-color signal light - Operating mode 4 - Accuracy package - Electronic handwheel - Energy meter for CELOS - Safety package for power failure - L-probe package 2 (Renishaw) / L-measurement Accessories, illustrated tools and clamping devices are only included in the scope of supply if this is stated in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: Cedpfxjy Tp E Ae Albjrg - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Credpey D Hvaefx Albeg Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment Cjdjyy Hgqepfx Albjrg :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: excellent (used), functionality: fully functional, machine/vehicle number: W1VVLCEZ7P4185343, mileage: 169,000 km, power: 120 kW (163.15 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 2,092 kg, maximum load weight: 708 kg, overall weight: 2,800 kg, tire size: 205/65R 16C, tire condition: 80 %, axle configuration: 2 axles, wheelbase: 3,430 mm, axle spacing: 3,430 mm, next inspection (TÜV): 01/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, number of gears: 6, number of seats: 3, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, permissible axle load (axle 1): 1,550 kg, permissible axle load (axle 2): 1,600 kg, loading space length: 2,566 mm, Year of construction: 2023, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, full service history, hill-start assist, navigation system, non-smoking vehicle, power assisted steering, seat heater, sliding door, soot filter, start-stop system, traction control, For sale is a Mercedes Vito 316 CDI Panel Van with long body. The vehicle features a sliding door on the right side and double rear doors. This Mercedes Vito is in very good technical and optical condition, showing only minimal signs of use. - Model: Vito 316 CDI - First registration: 19.01.2023 - VIN: W1VVLCEZ7P4185343 - Mileage: 169,000 km - MOT valid until: 01/2027 - Euro 6 - Engine power: 160 hp - Tire size: 205/65R16C - 6-speed manual transmission - Gross vehicle weight: 2,800 kg - Unladen weight: approx. 2,092 kg - Payload: 708 kg - Vehicle dimensions: Length: 5370 mm, Width: 1928 mm, Height: 1910 mm - Air conditioning - Armrest - Heated seats - Reversing camera - Tuner with hands-free system - Navigation system - Cruise control - Central locking - Electric windows - Lashing eyes PLEASE NOTE: Our vehicles are generally offered WITHOUT new MOT, technical inspection or new accident prevention test! These can be performed for an additional charge if desired. Crjdoy Aiyxepfx Albeg Vehicles sold for export outside the EU are only sold with a VAT deposit! Vehicle registration, license plates, and customs plates can be arranged for an extra charge! Sale is EXCLUSIVELY to businesses, dealers, or for export! Offer subject to change, input errors, modifications, mistakes, and prior sale reserved. Financing available on request. We are happy to organize customs clearance for you as well. Opening hours: Mon.-Fri. 8am-2pm or by appointment. Price is NET / negotiable. An invoice with separately shown VAT will be issued upon sale. Vehicle location: Im Gewerbepark 11, 99441 Umpferstedt

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Credpfx Aloyvrzxebog Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8 with Fassi F705R.2.6 Loader Crane MAN Equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 hp) * TN cab * Main wheelbase 2,980 mm * 2 batteries, 12 V, 175 Ah * 390 l fuel tank capacity, left side * 35 l AdBlue tank capacity, right side * Air compressor, 1 cylinder, 360 cm³ * Pneumatically controlled air preparation * Full emergency brake assist * High-performance engine brake MAN EVBec, multi-stage * Drum brakes * MAN D2676 LF78 diesel engine, 375 kW (510 hp), 2,600 Nm torque, Euro 6d * Pre-fuel filter with oil/water separator * Automatic gearbox * Front axle tires: 385/65R22.5 * Rear axle tires: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanical roof hatch * Central locking with remote control * LED daytime running lights * 2 rotating beacons on cab roof, 1 left and 1 right * 2 work lights on cab roof, 1 left and 1 right * External mirrors, electrically adjustable with maneuvering aid, heated * Preparation for 2 cameras, one camera activated with reverse gear * Driver's seat heating * Comfort driver’s seat, air-suspended * Multifunction steering wheel, height and tilt adjustable * 2 sockets, center of cab, 12 V and 24 V * Air conditioning, Climatronic * Auxiliary water heater, 4 kW * Internal, folding sun visor for windscreen * Roller blinds for door windows * MAN Media System Navigation Advanced 7-inch * MAN Sound System Advanced with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Final coat cab paint PURE WHITE RAL 9010 Crane Equipment: * FASSI F705R.2 TECHNO loader crane * Endless slewing range * Double knuckle system with PROLINK (articulable knuckle boom up to 10°) * Electronic overload cut-off system with FX900 * FASSI stability control FSC-SII incl. LMB II * Emergency stop and optical alarm (90% and 100%) * XF System (Extra Fast) + XP System (Extra Power) + FL System (Full Lift) * Radio remote control with linear levers and display for pressure values (in bar and %) * Emergency control for crane operation * Separate hydraulic tank (260 l) with filter and oil cooler mounted on the crane base * Hydraulic outriggers, extendable on both sides, support width 8.29 m * Outriggers operable via radio control * Standard color RAL 3020 traffic red – all cylinders painted black * Load hook and attachment clamps (short/500 mm) Csdpfx Aeywfxmolborg The full vehicle specification is available upon request. For further information, please do not hesitate to contact us.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. Cjdozg Tzxopfx Albsrg In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 123,000 km, power: 175 kW (237.93 HP), first registration: 04/2020, fuel type: diesel, empty load weight: 8,000 kg, maximum load weight: 3,990 kg, overall weight: 11,990 kg, axle configuration: 4x2, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 6,960 mm, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 500 mm, construction height: 3,500 mm, Equipment: ABS, air conditioning, airbag, compressor, crane, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: Crsdpfx Aszqfz Eolbog VEHICLE FINANCING & TRADE-INS POSSIBLE MERCEDES-BENZ ATEGO 1224 DUMP TRUCK (TILTING ON BOTH SIDES) HIAB CRANE TYPE XDUO 078 BS-2 + GRAB VAT can be shown separately * 1st owner, * CRANE UP TO MAX 2900kg * Differential lock * Electric mirrors * On-board computer * Phone preparation * ABS, ASR, CD radio * Tow hitch + trailer coupling * Platform approx. 4m x 2.35m x 0.5m * Air-suspended comfort driver's seat * German vehicle * MOT/emission test NEW! Please arrange a test drive appointment by phone. Subject to prior sale and errors. Call us!! We speak English. Financing, Trade-in, You can find more offers on our website. The information provided in advertisements, on the internet, price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller also assumes no liability for errors arising from typing, spelling and data transmission errors. Listed equipment may need to be checked separately. Please understand that, although the technical and optical condition of this vehicle is good, we prefer to sell it to commercial businesses or for export, excluding any warranty, due to its age and mileage. Thank you very much! The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The information does not claim to be complete and does not constitute a guaranteed characteristic within the meaning of § 434 BGB para. 1 sentence 3. Errors and prior sale remain reserved.

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Crsdpozp Nv Defx Albsg Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Cedpfxjzt Ipkj Alborg Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Crjdpfx Alozryupebjg Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 3 pneumatic ejectors - Control system: OptiCom Pro

Condition: used, Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: Crsdpfxezrywds Albeg - Saw blade diameter: 550 mm - Cutting width: 750 mm - Cutting depth: 175 mm - Motor: 5.5 kW

Condition: used, mileage: 54,400 km, power: 195 kW (265.13 HP), first registration: 07/2023, fuel type: gasoline, next inspection (TÜV): 06/2028, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Storage package, luggage compartment separation (net), rear cup holders, parking assistance package with remote parking assistant, driving assistance system: parking assistant, parking aid plus front, side and rear, acoustic and visual with environment display, Audi smartphone interface, controls with glass optics, incl. extended aluminum look, business package, touring assistance package, driving assistance system: emergency assistant with automatic emergency call, driving assistance system: predictive efficiency assistant, driving assistance system: adaptive driving assistant, exterior mirrors electrically adjustable, heated and foldable, with automatic anti-glare and memory function, exterior mirrors with curb assist, right, Bluetooth hands-free system with voice recognition (Audi Phone Box), parking aid plus front, side and rear, acoustic and visual with environment display, comfort climate control 4-zone, front seat heating, interior mirror with automatic anti-glare function, anti-theft wheel locks, driving assistance system: exit warning, interior trim: interior elements in synthetic leather top and bottom, contour / ambient lighting package (plus), headrests, variably adjustable, fuel tank: 73 liters, lumbar support front, electrically adjustable, light alloy wheels 8x18 (5-arm, for winter tires), metallic paint, new car tire warranty, panoramic sunroof front electrically, rear fixed, spare wheel as emergency spare, seat cover / upholstery: leather / 550 combination, sound system Bang & Olufsen Additional equipment: Airbag on passenger side can be deactivated, airbag driver / passenger side, ambient lighting, Audi connect (internet-based services), Audi connect (emergency call and assistance system), Audi drive select, exterior mirrors, aspherical, left, exterior mirrors, aspherical, right, exterior mirrors, vehicle color, turn signal lights LED integrated in exterior mirrors, headliner, fabric, silver, roof rails, anodized, door sill trims with aluminum insert, driving assistance system: occupant protection system (Audi pre sense basic), driver information system (FIS) with color display, rear seat system (3 seats), windshield with heat-insulating glazing, glossy package, rear lights LED, interior trim: decorative inserts aluminum fragment, Isofix mounts for child seat, body: 4-door, head airbag system (Sideguard), steering column (steering wheel) mech. height / longitudinal adjustment, light alloy wheels, mild hybrid 195 kW (engine 2.0 L - 195 kW 16V TFSI), mild-hybrid technology, multi-media interface MMI Basic Plus / MMI Radio Plus, multi-media interface MMI Navigation, non-smoker package, Otto particle filter (OPF), radio reception digital (DAB), rear seat back split / foldable (40:20:40), low emission according to emission standard Euro 6d, heated windshield washer nozzles, luggage compartment, rail system, side airbags front, seats front manually adjustable, standard suspension, start / stop system, jack, heat-insulating glazing (side / rear) Credpsztk Susfx Albsg

Condition: new, mileage: 400 km, power: 352 kW (478.59 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black with day registration 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 hp) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic transmission ? Reinforced single-plate clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis ? Wheelbase: 3,600 mm ? Overhang: 1,950 mm ? Main wheel spacing (between rear and tag axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through drive ? Rear axle: 13,000 kg, HY axle, not steered, without through drive ? Tag axle: 9,000 kg, steered, liftable, not driven ? Axle ratio: i = 3.70 Air suspension ? Electronically controlled air suspension (ECAS) on tag axle ? Automatic level adjustment ? Spring capacities: VA 9,500 kg / HA 13,000 kg / NA 8,000 kg Brakes ? Electronic brake system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (stepped) ? Disc brakes on all axles ? Electronic parking brake Tires and rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Tag axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, normal height ? Comfort seats: air-sprung, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning system ? Lower comfort bunk ? Storage space in seat console and storage compartments ? Interior styling: Moon Grey ? Sun visors, tilting roof ? Various storage compartments ? USB sockets ? LED lighting Permissible loads ? Technically permissible gross weight: 26,000 kg ? Axle loads: VA 9,000 kg / HA 11,500 kg / NA 7,500 kg ? Technically permissible trailer load: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Driver assistance systems ? ESP, ASR, cruise control ? Emergency brake assist ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inches) ? MAN SmartSelect Interface for superstructures ? Pre-installation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for more traction ? Comfort features for the driver ? Factory interfaces and pre-installations for municipal, construction, and emergency services as well as flexible superstructures - FASSI loading crane F545RA.2 xe-dynamic base unit ? Type: F545RA.2 xe-dynamic Csdoy Sqqqspfx Albjrg ? CE directive EN 12999 HD5S2 compliant ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuously rotatable Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard chrome-plated Joint system ? Double knee lever system with PROLINK ? Knuckle arm can be extended by up to 15° Overload protection ? Electronic overload cut-out FX500 ? FSC stability control ? LMB II ? Emergency shutdown and optical alarm Valves & filters ? Pressure relief and holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler on the base Control ? FASSI radio remote control RCH/RCS ? Display of pressure values ? Danfoss D850 control block with 4 control valves ? Emergency operation Outriggers ? Hydraulically extendable on both sides ? Outrigger width: 7.79 m Speed control ? Dynamic Control - load-depen

Condition: good (used), functionality: fully functional, For sale is a robust and reliable Pfeiffer Piccolo oscillating circular saw, designed for professional use in carpentry shops, timber construction companies, and woodworking businesses. The machine is equipped with a total of approximately 4,000 mm long roller table, pneumatic workpiece clamping, and two-hand operation. The cutting feed rate is continuously adjustable. Technical data / Features: Manufacturer: Pfeiffer Codpjzx U E Ajfx Alborg Model: Piccolo Machine type: Oscillating circular saw / Miter saw Cutting height: max. approx. 125 mm Total roller table length: approx. 4,000 mm Pneumatic workpiece clamping device Two-hand operation Continuously adjustable cutting feed rate Length stop Roller track for workpiece feed and removal Dust extraction connection Separate control panel with emergency stop Robust industrial design The machine is in used condition, as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's premises. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to alteration. All information is without guarantee.

Condition: good (used), mileage: 119,943 km, power: 120 kW (163.15 HP), first registration: 05/2019, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,120 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2019, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 1292 kg, Unladen weight: 2208 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Lighting type: Halogen lamp, Climate control, Bluetooth, Blind spot sensor, Engine power: 120 kW (161 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, side paneling, step at the rear, roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, maxi ac EURO6 MBUX10 carplay cruisecontrol, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VBH-04-Z Axle Configuration Cjdpfszx R E Sox Albjrg Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,208 kg Payload: 1,292 kg GVW: 3,500 kg Functional Height of the loading area: 61 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: 310 € per month (delivery van, 72 months); Inquire about further information and conditions.

Condition: good (used), mileage: 86,280 km, power: 88 kW (119.65 HP), first registration: 06/2021, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, total length: 5,590 mm, total width: 1,960 mm, total height: 2,080 mm, loading space length: 1,850 mm, loading space width: 1,660 mm, loading space height: 1,380 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Tinted windows - Halogen lamp - Incl. roller - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Csdpfxszx R Hie Albjrg Configuration: 4x2, Payload: 1173 kg, Curb weight: 1897 kg, Gross vehicle weight: 3070 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Tow hitch, Cabin type: Double cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assist: Rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Black, Metallic, Maintenance manual, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 88 kW (118 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended, Side paneling, Roof rack: incl. roller, Side doors: 1, Side windows: 2, Rear closure: Double door, Central locking, Number of seats: 6, Seat arrangement: 1+2+3, Seat cover: Fabric, Seat adjustment: Manual, L2 Double Cab NAP Airco 120Pk Euro6 Roof Rack Navi 1st Owner Service History!, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VLF-36-L Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,897 kg Payload: 1,173 kg GVWR: 3,070 kg Functional Loading area height: 55 cm Maintenance APK (Technical Inspection): Valid until 11/2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: 308 € per month (delivery van, 72 months); Ask for further information and conditions.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,000 kg, High-performance and very attractive Polar 76 SD-P paper cutting machine complete with 3 blades, tools, and documentation Credpfxozyagbs Albjg 76 cm cutting width 11 cm stacking height Hydraulic clamping pressure continuously adjustable from 150 to 2500 daN Minimum cut without guard plate: 1.5 cm Direct dimension input via keyboard, memory function Optical cutting indicator 400V/50Hz/1.5kW, dimensions 152x175xH140 cm

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, power: 9.8 kW (13.32 HP), input current: 16 A, inner dimension length: 80 mm, inner dimension width: 120 mm, inner dimension height: 16 mm, total length: 140 mm, total width: 153 mm, total height: 200 mm, overall weight: 600 kg, number of chambers: 4, actuation type: electric, fuel type: electric, Wiesheu EBO 128-S multi-deck oven Separate control for lower and upper heating elements 4 decks, deck height: 16.5 cm Oven is mobile with locking mechanism Modular construction Connection: 400V, 16A-CEE plug Crodpfx Alezylhwobeg Dimensions: 1530 x 1400 x 2167 mm (W x D x H) Used oven