Used Teycomur Maquinaria Atmosphärischer Füller for sale (323)

Condition: used, functionality: fully functional, Capacity will depend on the product to be used. Dedpfx Agewny Spevsch

Condition: like new (used), Machine that enables cooling of any format. The cooler is divided into the following groups: 1- Can inlet. 2- Cooling corridor - ZONE 1 - ZONE 2 - ZONE 3 3- Jar outlet. 4- Drying. Includes: - Infeed and outfeed belts with variable speed motor. - 3 centrifugal pumps - Chemical dosing pumps. Output may vary depending on the format. Dedpex S Iu Tsfx Agvech

Condition: like new (used), The PM13 wrapping machine is the latest generation from PRAS-MATIC and incorporates all the technical features required for high-speed shrink film packaging. The PM13, which operates without a sealing bar, utilizes a single lower film reel. With a continuous-motion process and a rotating knife, the polyethylene film is precisely cut to length and wrapped around the products by four rotating rods. This unique operating principle enables exceptionally high running speeds by eliminating the bottlenecks of conventional sealing bar systems. The film unwinding, feed, and cutting mechanisms are all electronically controlled. The PM13 is engineered for high-speed shrink wrapping of: - Cans - PVC and PET bottles (with cup or petaloid base) - Jars - Glass bottles - Detergent and plastic bottles SPECIFICATIONS: Package Size: - Max. length: 500 mm - Max. width: 360 mm - Max. height: 360 mm Film Reel Size: - Outer diameter: 500 mm - Core diameter: 70 mm - Thickness: 40–80 microns Cardboard Tray Dimensions: Dodpfx Aeyn Hw Degvjch - Min.: 150 x 200 mm - Max.: 350 x 540 mm - Min. edge height: 30 mm - Max. edge height: 100 mm Tray Capacity: approx. 600 units Output: 40 to 80 packs/minute (depending on product characteristics)

Condition: like new (used), The Ferlo static autoclave's sterilization process is based on heat and cold transfer via a water cascade system. This autoclave is suitable for products that do not require agitation during the sterilization process. Water is circulated by a pump through a stainless steel plate heat exchanger for indirect heating. Heating and cooling of the water, which is used throughout all process cycles, is carried out in the plate heat exchanger via steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PÂTÉS, CANNED FRUIT, FISH. Features: Diameter: 1,380 mm. Double door. Basket: 0.98 x 0.98 x 0.93 m. Heat exchanger. Automated loading and unloading. Operation by water cascade system. Dcsdpsyz Tt Tofx Agvoh Control panel. Valves. Distance between guides: 0.77 m.

Condition: good (used), Industrial steam boilers are closed vessels which, by burning various types of fuels (natural or liquefied petroleum gas, diesel, fuel oil, biomass, etc.), heat the water inside until it evaporates. This steam is then distributed through a network of pipes to all parts of the factory and supplied to the machines that require it. Dcjdpfxsyz Ttao Agvoh Includes: * Vertical water pump. Burner characteristics: Type: PELLETS

Year of construction: 2025, condition: new, functionality: fully functional, Maximum stack + pallet weight: 1,200 kg Maximum paper size: 1,200 x 900 mm Minimum paper size: 560 x 360 mm Dsdpsyztm Tofx Agvsch Minimum opening width: 840 mm Maximum opening width: 1,600 mm Power: 9.5 kW Power supply: 380V three-phase 50 Hz Weight: 3,400 kg Dimensions: 2,700 x 2,200 x 2,200 mm Noise level: < 80 dB

Condition: used, spindle bore: 150 mm, spindle mount: MK 6, Conventional Lathe Brand: ECHEA Model: DN 500 Serial no.: 4.075 Distance between centers: 6,000 mm Spindle bore: 150 mm Swing over bed: 1,000 mm Swing over gap: 1,300 mm Swing over cross slide: 980 mm Swing over compound rest: 780 mm Bed width: 670 mm Dsdpoyu Hyxefx Agvech Number of speeds: 24 (4–520) Morse taper in tailstock: 6 Hardened and ground bed. 400 mm gap in front of the chuck. Powered carriage. Includes 2 interchangeable carriages: - Tool post for conventional turning (tool post 280 x 280 mm, for tools up to 80 mm height) - Grinding attachment with 500 mm wheel and 10 HP motor – 1450 rpm Included: - TdG 3-jaw chuck 500 mm with outside jaws, inside jaws, and soft jaws - Grinding attachment for 500 mm wheel and 10 HP – 1450 rpm motor - Cable winder for powered carriage - Coolant tank with pump - 2 open steady rests with special non-seize pads, for approx. 250 mm diameters - 1 open conventional steady rest for approx. 200 mm diameter - 1 closed conventional steady rest for approx. 450 mm diameter - 23 grinding wheels for grinding attachment included, see photos.

Condition: good (used), 2 brackets for fixed bed milling machines Dedpfxjudvh Ie Agvjch Sizes: -Square 1: 370x620x2000mm -Square 2: 370x615x2000mm

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Dcjdpfjudv Tkjx Agvoh Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) 1.7Kw

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Dsdpfxoug Un Ej Agvsch Motor: 2,2KW Minimum bending diameter: 150mm Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Conical bending system Induction treated and hardened rollers Wire grooves at the end of the rollers.

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Dedpfx Agowi Sktsvech Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Dcsdpomza S Ejfx Agvjh Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1984, Second hand tangential grinding machine Brand: Txurtxil Model: NX Dcedpfxerfwzle Agvjh Machine serial number: 1984 All automatic movements, including Z axis. Characteristics: Grinding capacity: 600x300mm Magnet table dimensions: 500x200mm Power: Three phase 380V Total power: 7CV

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, rotational speed (max.): 1,460 rpm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Djdpfx Agjymw I Djvoch Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, total length: 3,100 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm Dcodpfx Aeydk D Hogvsh - 555 mm depth

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Dcedpfou Afwlox Agvoh Input power: 220/380/440V/3/50/60 Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: reconditioned (used), Year of construction: 2003, used machining center Brand: KONDIA Model: ZM 99 MF (Direct Engine) Power: 20KW Year 2003 Weight: 5,700kg CNC: GE FANUC Series 18i-MB Dispone de 4rto EJE controlado por el cnc marca TSUDAKOMA modelo RN-200B. Table dimensions: 1200x400mm X, Y, Z paths: 600x400x510mm Rapid advance on X-Y axes: 36,000mm/min. Rapid advance on Z axis: 30,000mm/min. Work advance: 5,000mm/min Head: ISO40 Speed range: 15,000rpm Maximum distance spindle to table: 660mm Automatic tool changer: Number of tools: 20 Selection type: RANDOM Maximum tool length: 225mm Maximum tool weight: 6kg. Precision: - Positioning accuracy: 0.01mm Dcodjhymdxjpfx Agvoh - Accuracy repeatability: 0.005mm - Resolution: 0.001mm It has a chip extractor. Includes gag. Includes ISO 40 tools.

Condition: used, Year of construction: 1978, functionality: fully functional, spindle bore: 250 mm, overall weight: 11,000 kg, Brand: Gurutzpe Model: Super AT 8000/600 Distance between centers: 8,000mm Swing over bed: 1,200mm Swing over carriage: 910mm Spindle bore: 250mm Gap: - Maximum admissible diameter: 1,500mm - Length in front of spindle: 410mm Djdpfx Aoyc R I Aogvech Powered carriage Maximum load between centers: 3,500kg Maximum load with one steady rest: 4,400kg Maximum load with two steady rests: 5,300kg Motor power: 15Hp Weight: 11,000kg Includes: - TdG 3-jaw chuck 520mm with internal, external, and soft jaws - Faceplate 1,100mm - Closed steady rest 500mm - Open steady rest with support 800mm - Open steady rest turret 100mm - Various lathe tools - 4-jaw chuck 700mm with 250mm spindle bore - 4-jaw chuck 800mm with 250mm spindle bore Year of lathe: 1978 *Original manual available

Year of construction: 2020, condition: as good as new (ex-display), Hydraulic press for tests and retouching of dies Brand: MHG Model: ER.2S.DM-300/2100 Serial number: 927 Year: 2020 Required power: 40kw Hydraulic oil: 1000Ltrs. deposit + 200 liters. circuit filling Total number of cycles: 403 (NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300t Number of cylinders: 3 Maximum tooling dimensions: 1400x1400mm Maximum tooling mass: 16,000kg Maximum working table and mobile table opening: 1690mm Minimum opening of work table and mobile table: 960mm Maximum mobile table travel: 730mm Approach speed: 92 mm/s Recoil speed: 93mm/s Stop time: 0.2s Dcedpfx Agsk Sgvyjvsh Safety distance: 500mm Weight with empty tank: 35.000kg

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Dsdelffdyspfx Agvech Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Dcsdpfx Agshzbi Nsvoh Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Year of construction: 1991, condition: good (used), Used fixed bed milling machine Brand: LAGUN Model: FBF 1200 Year: 1991 Serial number: B10109 Weight: 5,500kg Measurements: 2600x2300x2600(h)mm Control: HEIDENHAIN TNC 355 (New Screen) Dcedpfeh Rycfjx Agveh Table measurements: 1200x550mm Axis displacements: X-1100mm Y-600mm Z-600mm Ferret head with hydraulic mooring tool. Cone: ISO 50 Spindle speeds: 50 - 3000 rpm (2 speed ranges) Feedrates in the X Y Z axes: 1 - 3000 mm/min Rapid advance axes X Y Z: 10,000 mm/min Motor power: 15KW

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Flow rate: 890 m3/hour. Three-phase 380V Dcjdpfxeuf Nibs Agvoh 3000 rpm Weight: 1200 kgs.

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Dcodpeuf Nm Hefx Agvsh Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Dcodpfx Aeu Afttegvsh Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%