Used Swiss Type Turning Machine for sale (84,571)

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. Dusdoh I N Udepfx Aiwst * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Year of construction: 1989, condition: good (used), Kasto fully automatic sawing machine type HB 420 AU. Sawing capacity round 420mm Sawing capacity square 420x420mm Maximum clamp opening 480mm Saw blade 6300x41x1.3mm Variable speed 20-130rpm Chip conveyor Duodoh Huazopfx Aiwjt Engine power 8kW Weight 3360kg Machine in neat good working condition.

Condition: good (used), Year of construction: 1999, control SINUMERIK 840D Dodpfswzmqxox Aiwjut spindle head Ø 640 mm turning length 1000 mm

Condition: good (used), Year of construction: 2006, control Rexroth Duedjwzmriopfx Aiwot

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Duedoh U Nvkepfx Aiwet SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, documentation/manual, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included * Main swicth and emergency stop switch. Dsdpfx Aiswb Hhdeweut * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: used, Year of construction: 2006, turning length: 205 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, turning diameter: 20 mm, overall weight: 3,500 kg, total width: 1,150 mm, total length: 6,850 mm, total height: 1,765 mm, Equipment: documentation/manual, CNC Swiss Type Automatic Lathe CNC Control Star NICS (Yaskawa-Siemens 840DI) Dedpfxsywur Ne Aiwsut Turning diameter 20 mm Turning length 205 mm Spindle bore diameter 20 mm Spindle speed 500-10.000 R/min Spindle motor 3,7/2,2 kW Min indexing C-axis main spindle 0,001 ° Min indexing C-axis sub spindle 0,001 ° Number of tools on turret 16x Spindle speed driven tools 8.000 R/min Bar feeder FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Datron M8 Datron V9 control Year of manufacture: 2013 3kW HF spindle with HSK E25 tool holder, 1,000 to 40,000 rpm HIB HF spindle cooling unit 2 x 5-position tool changers 3D probe Renishaw Tool length probe Microjet minimum quantity lubrication system Vacuum table 1000mm x 700mm 2-way vacuum distributor Software: V9 • Protected areas • Tool monitoring (travel + time) • Smoothing • Reading filter for G-Code Dsdpfx Aioyzbmhsweut The machine is in very good condition.

Condition: used, spindle diameter 102 mm x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm spindle taper ISO 50 bore spindle stroke 710 mm main drive motor 11 kW turning speeds 1600 U/min Feed 4000 mm/min Control Heidenhain type TNC 135 T-slot - width 22 mm T-slot - distance 140 mm table surface area 1250x1400 mm Table load 2500 kg total power requirement 23 kW weight of the machine ca. 9,3 t Rotating table 360° The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Djdeyqvmaspfx Aiwout possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm Dodpfx Aiebx Eliowsut space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW

Condition: ready for operation (used), Year of construction: 2002, operating hours: 4,486 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 18,000 rpm, controller model: Fidia C20 mit Bedienteil HPX, The machine is in fully operational, very good condition. It has been dismantled, is in storage, and available immediately! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,500 mm Rotary axis A: 105° Rotary axis C: 300° Clamping area: 5,000 mm x 2,000 mm Table load: 15,000 kg/m² T-slot spacing: 18H12 / 250 mm Dedjywgyrspfx Aiweut Feed rate X, Y, Z axes: 20 m/min Axis acceleration X, Y, Z axes: 1.5 m/s² Max. spindle speed: 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A MACHINE DETAILS Spindle power: 28 kW Connected load: 40 kW Main fuse: 80 A Spindle hours: 4,486 h Machine hours: 146,161 h Dimensions & Weight Space required for machine with peripherals (L x W x H): 7,300 x 5,600 x 5,600 mm Machine weight: 16,500 kg EQUIPMENT 3-sided enclosure, without extraction ducts

Condition: good (used), Schmedt PraKant Turning-in machine The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Dedpjywdm Asfx Aiwsut Power supply: 400 V Flexible speed control.

Condition: excellent (used), Year of construction: 1999, operating hours: 308,181 h, functionality: fully functional, Machine: WEMA PROBST RHM (Second Generation) Year of Manufacture: around 1999 Wood Diameter: 30 ‒ 120 mm Main Motor (Cutting): 15 kW / 380 V Feed Motors: 1.5 kW Total Power: approx. 17 kW Dedpfx Aijydmp Soweut Condition: Excellent working and visual condition Additional: Several sets of brand new knives included Location: Bulgaria, Vrani kon 7940 Price: On request A demonstration can be done on site!

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW Dujdpfxexq Hkzo Aiwst weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 Dodpfx Aijwth Szjwjut number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 35 m/min, spindle speed (max.): 5,000 rpm, table width: 2,000 mm, table load: 15,000 kg, table length: 2,000 mm, CNC HEIDENHAIN ITNC530 HSCI ANNO 2016 Longitudinal X-travel: 6000 mm Cross Y-travel: 1250 mm Vertical Z-travel: 2000 mm Rapid feedrates: 35 mt./min. Semi-automatic accessory change Spindle motor power: 34 kW Constant power speed range: 400 – 5000 rpm Duedpfjyugbiex Aiwjt Maximum torque: 830 Nm Maximum feed rate: 35,000 mm/min Acceleration: 1.5 m/s² Maximum spindle speed: 5000 rpm Hydrostatic rotary-translating table TRT15 Table size: 2000 × 2000 mm (15.000 KG) Universal bi-rotary head with thousandth-degree positioning Taper: BT 50 Double cradle for loading/unloading two milling heads, with dedicated management software Chain-type tool magazine, 40 positions, ISO 50 High-pressure coolant system, external/internal through the tool, with paper filter External pressure: 4 bar Internal pressure: 20 bar Through-tool compressed air coolant Chip conveyor with right-side discharge Remote control panel

Condition: excellent (used), Year of construction: 2014, control Fanuc 31/32 i 2 chucking diameter 170 mm swing diameter 210 mm x-travel 400 mm z-travel 200 mm length 2500 mm width 1900 mm Duodpfxjyvvupo Aiwjt height 2300 mm weight 5500 kg

Condition: used, Year of construction: 2003, turning diameter 220 mm Control GE Fanuc 18i-TB x-travel 400 mm z-travel 450 mm Dsdpfoyf N D Iox Aiwout tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 6.000 U/min Number of working hours 10741 h work stroke 150 mm X-Achse range L-W-H 3100 x 2000 x 3200 mm weight 6500 kg rapid power traverse in X-and Z direction 60/30 m/min EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Duedpfxjyvt Nws Aiwot Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,859 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X-axis: 2,000 mm Duedpeyvt Aqjfx Aiwjt Travel Y-axis: 1,500 mm Travel Z-axis: 1,500 mm Number of stations: 90 Head and rotary table: 1,600 x 1,450 mm MACHINE DETAILS Control type: CNC Control: Heidenhain Operating hours Control on-time: 106,253 h Machine on-time: 93,170 h Program runtime: 41,859 h

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, We are offering this Mazak INTEGREX i500V CNC turning and milling machining center, in very good condition, year of manufacture 2014. Dusdpfx Aijyymrmjwot Manufacturer: Mazak Model: INTEGREX i500V Year of manufacture: 2014 Condition: very good If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume Dujdpfx Aioh Agr Hjwjt * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: excellent (used), Year of construction: 2007, TRAVELS: 9000 X 1100 X 1000 MM Dedpfxjyylfro Aiwout AXIS RAPID FEEDS: 24 M/MIN WORKPIECE TABLE DIMENSIONS: 10,000 X 1500 MM TOOL CHANGER: 42 POSITIONS SPINDLE MOTOR POWER: 55 KW SPINDLE: 24,000 RPM CNC: FIDIA C 20 YEAR: 2009

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,347 h, functionality: fully functional, machine/vehicle number: 190347, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 3,000 kg, controller model: Heidenhain TNC 430 B, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,500 mm Table size (2x): 2,000 x 2,000 mm Table load capacity: 3 t Spindle speeds: 60 - 3,000 rpm Spindle taper: ISO 50 MACHINE DETAILS Duodpfx Ajyu Rr Eeiwjt Control: Heidenhain TNC 430 B digital Number of controlled axes: 6 Milling drive: 25 kW Total power requirement: 50 kW Dimensions & Weight Space requirement: approx. 6.5 x 3 x 3 m Machine weight: approx. 26 t Program run time: 22,347 h EQUIPMENT Integrated coolant supply (IKZ) 40-position automatic tool changer Chip conveyor High-speed spindle (30,000 rpm) 2 pallets

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,616 h, functionality: fully functional, machine/vehicle number: 184640, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, table load: 5,000 kg, controller model: Heidenhain TNC 430 B, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,400 mm Travel Z-axis: 1,500 mm Table size: 3,000 x 1,400 mm Dodoyu Rquopfx Aiwjut Table load capacity: 5 t Spindle speeds: 60 - 3,000 rpm Spindle taper: ISO 50 MACHINE DETAILS Control: Heidenhain TNC 430 B digital Milling drive power: 22 kW Total power requirement: 50 kW Dimensions & Weight Footprint: approx. 6.5 x 3 x 3 m Machine weight: approx. 22 t Operating Data Program run time: 25,616 h Machine on-time: 53,291 h Control on-time: 55,029 h EQUIPMENT 20-position automatic tool changer Milling head can be automatically swiveled and rotated in 1.5° increments Chip conveyor Adaptable high-speed spindle (30,000 rpm) Mist coolant system