Used Stamp Recording for sale (2,395)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h Lredpfx Afjzvckns Sst • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: good (used), Year of construction: 2001, HÜLLER HILLE NBH 95 CNC Horizontal Machining Center with FASTEMS Pallet Automation Machine has perfect geometry Well-maintained with service records Manufacturer: HÜLLER HILLE Model: NBH 95 Machine type: CNC Horizontal Machining Center Year of manufacture: 2001 Control: SIEMENS SINUMERIK 840D POWER LINE TECHNICAL DATA Travel X-axis: 630 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Machining position: horizontal Number of CNC axes: 4 B-axis: NC rotary table B-axis: 360° Pallet size: approx. 400 x 500 mm Automatic pallet changer: yes Tool interface: HSK-A63 Ledpfx Afsz D Il Re Sort Tool magazine: 100 tool positions Automatic tool change: yes CNC CONTROL SIEMENS SINUMERIK 840D AUTOMATION FASTEMS Pallet Automation System Automatic pallet rack Automatic storage and retrieval system / pallet handling 20 base pallets suitable for the machine Multi-level pallet rack Automatic loading and unloading of the machine Separate FASTEMS control Separate control cabinets Complete protective fencing / safety enclosure COOLANT SYSTEM Separate coolant system Coolant tank Band filter system Manufacturer of the coolant system: Bürener Maschinenfabrik GmbH Year of manufacture of the coolant system: 2001 Electrical data of the coolant system: Connection voltage: 400 V / 50 Hz Control voltage: 24 V DC Power: 10 kW Rated current: 23 A Max. fuse: 35 A CHIP DISPOSAL Chip conveyor available Automatic chip removal Coolant return to the filter system ELECTRICAL DATA MACHINE Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V AC Valve voltage: 24 V DC Total rated current: 80 A Supply line fuse: 100 A EQUIPMENT 100-position tool magazine HSK-A63 tool interface NC rotary table / B-axis FASTEMS pallet rack system 20 base pallets Automatic pallet handling Coolant tank Band filter system Separate coolant system Chip conveyor Machine enclosure Complete safety fencing for the automation Separate control cabinets Machine control panel FASTEMS operating/control system Signal lights Automated material flow between pallet storage and machine CONDITION The machine was in continuous production use until just before the sale. The last workpieces are currently still being produced on the machine. The machine can be demonstrated and inspected while powered on. According to the operator, the machine geometry is in perfect condition. Videos of the machine in operation are available. SCOPE OF DELIVERY HÜLLER HILLE NBH 95 100-position tool magazine FASTEMS pallet automation 20 base pallets Pallet rack Pallet handling system Coolant tank Band filter system Coolant system Chip conveyor Control cabinets Protective fencing Existing machine-related peripherals

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) Lodjyzylvepfx Af Sjrt 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment Lredpfx Afsgpxc So Sot - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: used, functionality: fully functional, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,360 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, suspension: air, color: white, Equipment: ABS, Schmitz Cargobull SKO24 Frigo Deep-Freeze Trailer, Blumenbreit ///// !!! Interior wall on the left side damaged // Doors damaged !!! ///// Schmitz axles with disc brakes Lift axle Air suspension, raise/lower function Schmitz S.CU Diesel/Electric Operating hours: Diesel 5,491h / Electric 615h Temperature recorder Fully insulated 45mm wall thickness Pallet box 1x 15-pole 24V power connection 2x 7-pole 24V power connections ABS/EBS Aluminum rims, Alcoa Cargo space dimensions: L 13.36m, W 2.49m, H 2.65m Tires: 385/65 R22.5 Tread depth: Lrsdpfx Asyml Ryof Sjt 1st axle, left 7mm, right 12mm 2nd axle, left 15mm, right 15mm 3rd axle, left 7mm, right 8mm

Condition: used, machine/vehicle number: 26649, Year of construction: 2018, operating hours: 52 h, load capacity: 1,800 kg, lifting height: 1,540 mm, free lift: 1,450 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, .: 26649 Device details: Year of manufacture: 2018 Load capacity: 1800 kg Lifting height: 1540 mm Recorded operating hours: 52 h Free lift: 1450 mm Mast type: Standard Lrodpfx Asz Egq Usf Sjt Mast height: 1940 mm Length/Width/Height: 1630 / 800 / 1300 mm Operating weight: 495 kg ---- Equipment: * Full free lift * DGS made of Plexiglas ---- Additional device information: ---- The operating hours are generally the recorded hours. We will gladly offer you suitable transport. We have another 250–300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We will gladly buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English. Subject to prior sale and errors for this offer. In dealer sales, the device is sold in its current condition, without refurbishment. All information without guarantee, subject to errors and changes.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). Lodpfxsy N Dago Af Sort - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Year of construction: 2013, condition: ready for operation (used), number of axes: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working area: approximately 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) • Rotational tool changer for versatile punching • High precision and repeatability • User-friendly cnc control • Compact and space-saving design • Fast tool change for efficiency • Robust and durable construction • Automated sheet clamping for consistent results Lrsdpfxeyaihvs Af Sjt • Suitable for batch and small to medium production runs

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 14,881 h, load capacity: 3,000 kg, lifting height: 3,200 mm, free lift: 1,400 mm, load center: 600 mm, fuel type: gas, motor manufacturer: VW, gearing type: hydrostat, fork length: 1,200 mm, tire condition: 60 %, Equipment: cabin, lighting, Load capacity: 3000 kg Operating hours: 14881 hours Mast type: Duplex Lifting height: 3200 mm Mast height: 2250 mm Free lift: Yes Side shift: optional Fork length: 1200 mm Fork width: 120 mm Fork thickness: 50 mm Cab type: Full cab with heater Tire type: Solid Engine: Gas Seat belt: Yes Suspended seat: Yes Steering handle: Yes Horn: Yes Lrodpfx Afjztxw Eo Sjt Lights: Yes The forklift has been owned for several years and regularly serviced by our workshop. Service records can be provided. Sold as is.

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch and Mausser Professional Coffee Roasting System – Complete System (Like New, 1,000 Hours) Price: 139,000 EUR net (negotiable, plus VAT) Condition & History: • Operating Hours: Approx. 1,000 hours (like new, excellent condition). • Design: G45 Retro system, rebuilt in 2019/2020 by Kirsch & Mausser, featuring a cast-iron design and complete, modern peripherals. • Availability: Ready for immediate pickup. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch Size: 25 - 55 kg • Gas Type: Natural gas or propane (230/400 V, 50 Hz) • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Closed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire extinguishing water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via a potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (production, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency converter for the roasting fan. Item 2: Frequency Converter for Drum Operation • Continuously adjustable roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touchscreen. Item 3: Semiautomatic Control System with Touchscreen • Freely positionable control panel with touchscreen. • Readability and automatic regulation of supply air temperature and roasting fan performance via recipes. • Parameter changes can be made at any time during the roasting process. • Additional potentiometers for independent control of burner, roasting, and cooling fans. • Pneumatic operation of the green coffee feed and the outlet flap in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveying fan, conveying pipe with bends and clamps, and closed machine hopper. Item 5: High Suction De-stoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact plate to prevent coffee breakage, connection to the cooling fan. • Air flap for regulating the rising speed, hand slide at the outlet. • Frequency converter for the de-stoner fan with potentiometer on the frame. Item 6: Drum Vacuum Measurement • Pressure sensor in the pipeline between the roaster and the system with direct display on the touchscreen. Terms & Conditions: Lsdpez Eah Hefx Af Sert • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No phone calls. • Legal: Commercial B2B sale with exclusion of any warranty, liability for defects, and right of return. The system is sold in its current condition. Disassembly and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2011, operating hours: 8,261 h, Equipment: all wheel drive, Stock No. 5797 Atlas 160 W mobile excavator with additional hydraulics ----* Manufacturer: Atlas * Type: 160W - Mobile excavator * Year of manufacture: 2011 Lrodozwbf Topfx Af Sjt * Power-shift transmission * Color: Orange * Tires: 10.00 - / Twin tires * kW/HP: 105 kW / 143 HP * Deutz engine with 143 HP, water-cooled * 2-shell grab * Total operating hours recorded: approx. 8,261 hours * Hydraulic operating hours recorded: approx. 3,581 hours * Hydraulic connections for hammer and shears * 301-liter diesel tank * 180-liter hydraulic tank * 32-liter AdBlue tank * Air conditioning * Adjustable boom * 270-degree camera system * Rotating beacon * Max. km/h * Work lights * Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle Ledpfx Aez A A Azjf Sert • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Lodey Avqdjpfx Af Sjrt Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,233 h, load capacity: 5,000 kg, lifting height: 5,450 mm, free lift: 560 mm, fuel type: diesel, mast type: simplex, construction height: 3,550 mm, power: 65 kW (88.38 HP), fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,300 kg, total length: 4,480 mm, drive type: Diesel, construction width: 2,150 mm, Side loader Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Ledpfxjzz Dv Nj Af Sert Front tire size: 300-15 Rear tire type: Superelastic Rear tire size: 300-15 Description: Operating hours recorded. Inspection possible by appointment. Transport options available. For further questions, please call. Rear work lights, front work lights, roof protection, windshield, half cab, heater, full cab, rotating beacon, windshield wiper, seat.

Condition: used, Year of construction: 2007, Equipment: all wheel drive, This machine has just arrived in our inventory: Liebherr wheel loader L 524 Z 2 plus 1 ?Very nice machine!!! Mostly original paint No particulate filter – no AdBlue VIN: VATZ0659VZB019076 Z – Load sensing system Year of manufacture: 2007 Recorded operating hours: 10,123 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 118 hp, hydrostatic drive with 3 driving ranges: driving speed range 1: 0–6.0 km/h, driving speed range A1-2: 0–16.0 km/h, driving speed range A1-3: 0–34.0 (40) km/h * Ride vibration damper for the load-sensing system – load-sensing system damping * Hydraulic auxiliary control circuit for tipping bucket, grab bucket, silage block cutter, sweeping brush, etc. * Air conditioning * Comfort driver's seat with pneumatic suspension * 4 work lights on the front of the cab roof * 2 work lights at the rear * Rear window heating * Battery disconnect switch * Rotating beacon (flashing light on the rear of the cab roof) Ledpfx Ajzxb Anef Ssrt * Road approval possible Permissible total weight: 13,500 kg Machine width: 2500 mm * Tires, front axle: 17.5 x 25 L3 – 50% * Tires, rear axle: 17.5 x 25 L3 – 50% Offer with quick coupler and 2.0 cubic meter bucket for a price of €44,900.00 net + VAT, ex warehouse Gemmingen Equipment available at an extra charge: * Tipping bucket from 2.5, from €4,950.00 * Bucket with lower mounting for quick coupler, 3.0 cubic meters: €3,660.00 * 4-in-1 bucket 2 cubic meters, on request * Pallet fork 5 tons from €2,190.00 Can also be supplied with a used scale if required! Pfreudt WK 60 * Optionally with printer for the scale Sale only to commercial businesses or for export. Sold as is, in the condition the machine is in. No guarantee or warranty. The specified mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the details in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, mileage: 93,193 km, power: 191 kW (259.69 HP), first registration: 06/2000, fuel type: diesel, empty load weight: 16,600 kg, maximum load weight: 1,400 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,550 mm, brakes: other, color: white, driver cabin: day cab, gearing type: mechanical, emission class: none, number of seats: 2, loading space length: 5,350 mm, loading space width: 2,350 mm, loading space height: 350 mm, Year of construction: 2000, operating hours: 12,174 h, Equipment: ABS, cabin, crane, differential lock, power assisted steering, trailer coupling, German vehicle, self-propelled work machine, therefore toll-exempt and unrestricted access in all environmental zones. Condition as shown in the photos. Genuine ONLY 93,193 km and 12,174 operating hours. Complete documentation and inspection records available. Crane from premium manufacturer Cormach, Type 30000. Hook height: 35 meters. Lifting capacity: 230 kg at 31.5 m, 350 kg at 25 m, 590 kg at 21 m, 1,250 kg at 17 m, 1,880 kg at 10 m, 2,890 kg at 6.5 m. Main boom extends to 17 meters, with jib up to 31.5 meters. Features include heavy-duty electric winch, radio remote control, elevated operating seat, four hydraulic outriggers, trailer hitch, trailer load 15,000 kg, total towing weight with trailer 33,000 kg, ABS, air-sprung comfort seat, aluminum loading ramps. Cargo bay dimensions: length 5,350 mm, width 2,350 mm, height 350 mm. Spare wheel, electric windows, wheelbase: 4,550 mm. GVW: 18,000 kg. Unladen weight: 16,600 kg, payload: 1,400 kg. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally comes WITHOUT new TÜV inspection, without new DGUV, without new safety inspection (SP), and without new accident prevention inspection (UVV). You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Please note: We offer and strongly recommend an inspection and assessment of the equipment to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specifications of the equipment/vehicles. Subject to change, prior sale, and errors. Lrjdpfxevhqi Tj Af Sst

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Lrodpfezhw Hujx Af Sjt Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Lredpfsu Rwa Iox Af Set Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand large-format printer, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x OCE Plot Wave 360 Meter readings: Total: approx. 7,261 pages Lrjdpfxsz Aq I Us Af Set Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand finishing machine, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x Canon Multifunction Pro Puncher B1 Condition: Lsdpfx Afez Aqy Ro Sert This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lredpfx Aov Hp T Usf Sst Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. Lodjznlbgjpfx Af Ssrt The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 26674, Year of construction: 2005, operating hours: 17,059 h, load capacity: 3,500 kg, lifting height: 4,800 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,230 mm, Equipment: cabin, .: 26674 Device details: Year of manufacture: 2005 Load capacity: 3500 kg Lifting height: 4800 mm Recorded operating hours: 17059 h Free lift: 1400 mm Mast type: Triplex Mast height: 2230 mm Length/Width/Height: 2720 / 1250 / 2220 mm Operating weight: 5000 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve * Full cabin * Full free lift * Heater * Front work light * Rear work light ---- Additional device information: Flashing beacon Single pedal ---- The operating hours are generally the recorded hours. We would be happy to offer you the suitable transport. We have another 250 to 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? Lodpfx Aozlcdtof Sert During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English. Subject to prior sale and errors for this offer. In dealership business, the device is sold in its AS-IS condition, without refurbishment. All information without guarantee, errors and changes reserved.

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; Ljdjxz Niujpfx Af Sort heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force.

Condition: used, machine/vehicle number: 26517, Year of construction: 2009, operating hours: 20,026 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,780 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, Equipment: cabin, sideshift, .: 26517 Machine Details: Year of manufacture: 2009 Load capacity: 3000 kg Lift height: 5900 mm Lredpfxey Dtcto Af Sst Recorded operating hours: 20,026 h Free lift: 1780 mm Mast type: Triplex Mast height: 2650 mm Length/Width/Height: 2750 / 1250 / 2200 mm Operating weight: 4770 kg ---- Features: * Overhead guard * 3rd hydraulic valve * Full cabin * Full free lift * Soot filter * Heater * Front work lights * Rear work lights * Non-marking tires ----- Attachments: * Side shifter ---- Additional Equipment Information: * Reversing alarm * Beacon light ---- Operating hours stated are generally those read from the hour meter. We are happy to offer suitable transport solutions. An additional 250 - 300 forklifts, attachments, and sweepers available immediately. Rental options also available! We will gladly purchase your used equipment. Do you have questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to hearing from you! We speak English. Intermediate sale and errors for this offer are expressly reserved. For trade sales, the machine is sold as is, not refurbished. All information provided without guarantee. Errors and changes excepted.