Used Squaring/Edgebanding Lines for sale (11,064)

Condition: excellent (used), Casadei 350PM edger, Felder G263 Liquids Pre-milling cutters, Plate heating, Roller glue application, Kdedozu Nxvspfx Abner Pneumatic pre-trimming saw, Pressure rollers, Front-rear trimming saw, Top-bottom milling unit R1 – R2, Profiling cycle R1 Flat cycle, Machine length 230cm, Feed rate 7m/min, Max. component height 45mm, Max. edge thickness 2mm, Used machine in very good condition Mileage 6,800 meters Purchase possible through leasing.

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Kdedpfx Aszvfdwjbnor Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup.

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Kodpfx Aeru Un Hsbnjdr Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 89257, pressing force: 60 t, input voltage: 380 V, total height: 2,000 mm, type of input current: three-phase, working height: 2,000 mm, total length: 9,500 mm, control cabinet width: 1,000 mm, total width: 2,000 mm, year of last overhaul: 2026, pressure: 100 bar, control voltage: 12 V, workpiece height (max.): 120 mm, rotational speed (max.): 6,000 rpm, air pressure: 8 bar, We offer this ready for use WEINIG Dimter HK200 finger jointing line, year of construction 1996. If you have any questions or need more information, feel free to send us a message or give us a call. Kdodszatztjpfx Abner

Condition: good (used), Year of construction: 2014, machine/vehicle number: K/45173, functionality: fully functional, operating hours: 3,650 h, power: 25.1 kW (34.13 HP), input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 20 m/min, total height: 1,750 mm, total length: 8,680 mm, total width: 1,300 mm, overall weight: 4,500 kg, Equipment: CE marking, Available from April 1, 2027, for self-dismantling and self-collection. Suitable for veneer, plastic, and solid edge banding. Edge banding thickness: 0.2-20mm Workpiece dimensions: Width: minimum 65mm Height: minimum 8mm Height: maximum 60mm Length: maximum 150mm Throughput speed: 12-20m/min - infinitely adjustable Glue application: Glue application roller with Vario-melt dosing system Kdodpfxozmu T Ns Abnor Working height: 940mm Machine dimensions: Height: 1750mm Width: 1300mm Length: 8680mm Weight: 4500kg - Double roller pressure, electronic positioning based on panel thickness - Automatic continuous lubrication - Automatic edge banding magazine - Automatic roller magazine For an exact machine description, see the photos and data sheets in the appendix. In addition, the LIGMA Tech TYPE ZHR 05 workpiece return system, as shown in the photos and data sheet, can be purchased for €7,000 (excluding VAT).

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6582018005, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Ksdpjztxv Usfx Abnedr Detailed information about the machines is provided in the attached file.

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Kdedpfx Abezuz H Senor Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: used, Year of construction: 2017, functionality: fully functional, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, Equipment: documentation/manual, We offer this Format4 Tempora 60.12 edge banding machine, used, manufactured in 2017. Manufacturer: Format4 Model: Tempora 60.12 Kdjdeztmbrspfx Abnor Year of manufacture: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2023, Edge banding machine Manufacturer: Biesse Type: Akron 1440 A Year of manufacture: 2023 Technical data - Panel height*: 10-60 mm - Edge height: 14-64 mm - Edge thickness from roll: 0.4-3 mm - Edge thickness in strip form: 0.4-12 mm - Panel overhang over the chain: 25 mm - Panel length: 140-3200 mm - Minimum panel width (at a length of 140 mm): 85 mm - Minimum panel width (at a length of 250 mm): 50 mm - Chain feed speed: 12 m/min - Distance between panels: 450-650 mm - NC axis package for automatic machine setup - Mounting kit for workpiece return * Minimum panel height: 8 mm at a maximum edge thickness of 1.5 mm. Depending on the selected processing units. Maximum permissible feed speed: 12 m/min. Units Anti-stick spray unit ADZ02 Pre-milling unit RT02 - two high-frequency motors, each 1.8 kW, 12000 RPM Gluing unit VC-511 - Processing of EVA and PUR granular adhesive - Filling volume: 1.5 kg Pressure zone - 1 driven pressure roller 100 mm, with independently adjustable pressing pressure - 2 and 3 pressure rollers, not driven, 60 mm, with anti-stick coating, arranged conically in relation to each other and pneumatically adjustable Trimming unit IT-70-S - two high-frequency motors, each 0.8 kW, 12000 RPM Kdsdjzuyk Ajpfx Abnjr - The trimming can be performed straight (0°) or at an angle in a range of 0 to 15°. - Anti-static/coolant spray device after the trimming unit Flush trimming unit RF02 - two high-frequency motors, each 0.65 kW, 12000 RPM Corner rounding unit - two high-frequency motors, each 0.65 kW, 12000 RPM - Corner rounding is possible for both workpieces with a straight edge profile and for postforming and softforming profiles at 90° and 180° corners. Edge scraping blade RB02 - Switching between two processing profiles is done manually. Glue line scraping blade RC02 Polishing unit SZ02 - two motors, each 0.37 kW, 2800 RPM Hot air blower PH-501 - Power: 2 kW - Infinitely adjustable temperature control Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Cassettes + cutters for a roll forming machine used in the production of trapezoidal sheet metal. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm Details can be found in the photos. Processable sheet metal: Aluminum + steel in 0.75 - 1.5 mm Consisting of a total of: - Cassette 1 for profile 153 and 158 - Cassette 2 for profile 153 and 158 - Cassette 3 for profile 153 and 158 - Cassette 4 for profile 153 - Cassette 4 for profile 158 - Cassette 5 for profile 153 - Cassette 5 for profile 158 - Cassette 6 for profile 153 - Cassette 6 for profile 158 - Cutter for profile 153 - Cutter for profile 158 All items come from ongoing production; the sale is due to a product changeover. Kdodpfjzvgwfjx Abnsr This includes only the cassettes + cutters, without drives, coils, shears, etc. Total weight: approx. 86,000 kg

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Kjdeuizlcjpfx Abnsdr Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Composed of the following machines: Kedsun N Dlopfx Abnodr A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Kodpozu T Sgjfx Abnsdr Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Kdjdpex Ari Hefx Abnjr Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment available upon request. Chassis Regular ladder frame in lightweight steel construction with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension Axle lift mechanism on axle 1. Manufacturer of choice: Kögel - three-axle unit with disc brakes, Ø 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle tires Tires: 6x 385/65 R 22.5 UNIROYAL TH 50. Chassis components Kingpin supports (manufacturer of choice from Kögel), mechanically operated with leveling support, lifting capacity approx. 24 tons. One-sided operation on the right side when traveling. Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for a three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with spray flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with spray flaps behind the axles. Toolbox for storing: 10 side panels, folding stanchions, and rear door or rear flap. Fully enclosed, protected against spray, and also serves as a side protection device. Ground clearance (front): 220 mm. Kdjdpfx Aszth E Eobnsr 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installation at the rear, 1x on the left and 1x on the right. High, rigid underrun protection at the rear made of steel according to ECE-R58. 1 pair of retractable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection. Arrangement in the front and rear areas of the vehicle. Brake/air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection lines), parking brake as a spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection. WABCO EBS system. Air suspension system incl. 1 lifting and lowering valve, mounted on the left side behind the axle unit when traveling. Driving position is automatically adjusted. 2 tamper-proof coupling heads in the front ISO 1728 34410.010. Air reservoir for brake system and air supply made of steel (EN 286-2). Floor Plate floor approx. 30 mm thick. Floor sealed around the perimeter. Pocket for square tube inserts, approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of pocket strips (18 pockets per strip: 4 pieces each on the outside + 10 pieces in the middle). Superstructure Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall Storage for max. 14 square tube inserts, approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front panel according to EN 12640. Rear wall Foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tensioners and T-latch locks, 2 foldable steps on the inside. Foldable steel corner posts at the rear at the height of the side panels. Side wall 4 pairs of folding stanchions at the height of the side panels, 43540.380 VarioFix steel hol

Condition: excellent (used), Year of construction: 1999, Edge banding machine Kdedpezt I Iyjfx Abnsr Manufacturer: Brandt Type: KD 69 Q Year of manufacture: 1999 Edge thickness: 0.4 - 3 mm Workpiece thickness: 10-50 mm Min. workpiece width: 70 mm Min. workpiece length: 170 mm Feed rate: 11 m/min Power: 6 kW Pressure beam adjustment: Electric Miter saw unit: Yes Radius flush trimming unit: Yes, two units Radius draw knife: Yes Rounding unit: Yes Dimensions: 4,400 x 1,260 x 1,990 mm Weight: approx. 1,160 kg

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Kdsdpezul Utjfx Abnjr Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology Kdodpfx Aei D Di Sebnjr The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Specification Value Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg

Condition: used, Year of construction: 2022, - SCM DMC System / E83 2000 sanding machine - Superfici Transporto conveying system - 2x Superfici Valiorta F1 B painting machines - 2x Superfici UV drying units Painting line Manufacturer: SCM/Superfici Painting line consisting of: Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Conveying system Manufacturer: Superfici Type: Transporto Year of manufacture: 2022 2x painting machines Manufacturer: Superfici Type: Valiorta F1 B Year of manufacture: 2022 Kodpfx Ajzuzkkobnodr 2x UV drying units Manufacturer: Superfici Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2007, BIMAX TA 91 Automatic Circular Saw TECHNICAL DATA Total power requirement, rotary current: 3 x 400 V Kodpfx Ajv I Dmljbnsdr For pneumatic machines: 3 kW For hydraulic machines: 3 kW Customer-provided mains fuse: 16 A Supply line: 4 x 2.5 mm, 3P + E Air connection: Diameter: 12 mm Supply line: 8 – 10 bar, 40 l/min Operating pressure: 6 bar Spindle drive via three-phase motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw blade mount: 32 mm Drive pin: 8 mm Pitch circle of drive pin: 45 mm Cutting wheel mount: 22 mm Saw blades: 160 x 1 to 300 x 2 mm Passage range: Round up to 65 mm Square up to 55 x 55 mm Rectangular up to 80 x 50 mm Standard clamping jaw for diameters: 10 – 60 mm Material feed length: 0 – 250 mm Saw weight: 500 kg Hydraulics: 120 kg No liability is assumed for the accuracy, completeness, or timeliness of this information.

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. Kjdpfxjznlbgj Abnedr A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Kodpfx Abszvgdlsnsdr Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 1993, Edge bander Manufacturer: Bi-Matic Type: BSC 222.5 Year of manufacture: 1993 Edge thickness: 0.4 - 3/8 mm Workpiece thickness: 10 - 60 mm Feed rate: 8 / 12 m/min Cut-off saw unit: Yes Flush trimming unit: Yes Kjdpfx Ajzudfqebnjdr - The machine needs to be re-adjusted and/or serviced.

Condition: excellent (used), Year of construction: 1998, operating hours: 1,830 h, functionality: fully functional, Please submit your price offers. Schroeder solid hardwood flooring production line. It has only operated for 1830 working hours (1 year with one shift). Fully functional, with a working speed of 30 m/min. The line consists of: Feeder, Planer I, transfer, Planer II, transfer/turntable, End matcher. Dimensions of the processed elements: width 45-100mm, thickness: 10-23mm, length: 250-1200mm. Kedpfx Abjywkdzenodr

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: - Bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 - Swing top sealer Manufacturer: Rico - Labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 - Laser printer for dating Manufacturer: Domino - Bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Kdedpfx Abezu Rw Tener Features: Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine; Domino laser printer for dating; bottle collection table