Used Spx Flow Anhydro/Apv Type Ii K for sale (66,115)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges Nlsdezxn Nnopfx Af Ssg - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, For Sale: Flow 9XVD-55 High-Pressure Pump We are offering a Flow 9XVD-55 high-pressure pump for waterjet cutting applications. Condition: The machine is disconnected and ready for collection. Sold in its current condition. Suitable for recommissioning, refurbishment, or spare parts. Specifications: Manufacturer: Flow Model: 9XVD-55 Type: High-pressure pump for waterjet systems Nlsdpfxezrznws Af Seg Many spare parts according to the photo. Complete manuals included. Inspection is possible by prior arrangement.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas Nlodpfx Afezvckno Sjg • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: as good as new (ex-display), Year of construction: 2016, For sale: machine for packaging paneling. Nodpfx Aszkwi Uof Sjlg

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Nljdpfx Aszi Ihfef Sjg Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Nodpfx Afozh Auqj Selg EKS key interlock EKS-A-IIX-G01-ST02/03 (106305) EUCHNER

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide See video attached Nsdpfxoy Rvfqj Af Selg Price € 7,500 We can organise shipping / delivery for you.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Nlodpfoy Urzijx Af Seg Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: excellent (used), Manufacturer: O&K Nledpfx Afezaa Utj Seg Valid TÜV inspection until 15.08.2026.

Condition: used, mileage: 337,730 km, power: 182 kW (247.45 HP), first registration: 12/2015, fuel type: diesel, number of seats: 27, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), Our internal vehicle number: 1188 Solaris Urbino III 8.9 LE Power: 182 kW Emission class: Euro 6 Vehicle class: M3 First registration: 12/2015 Nedpfx Aozdmntjf Sslg * Voith automatic transmission D/N/R * 27 seats * 33 standing places * mobitec destination display front/side/rear/side with control unit * electric sunshade * air conditioning * radio * camera system / video surveillance * folding ramp * multi-purpose area - wheelchair / stroller * raising/lowering/kneeling function * digital tachograph * convection heater * original mileage * child seat attachment 2 x ISOFIX – brackets installed in seats * 2x inward-swinging door * reversing camera * MultiCharger 2x 20A - DEFA * interior route display * socket and air connection at the front Note: Vehicle is registered - mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information is without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: used, Year of construction: 2008, functionality: limited functionality, For sale is a complete driverless transport system (DTS/AGV) from the renowned manufacturer E&K Robotics, built on proven Linde L16 base vehicles. The system is optimally coordinated and will be sold including the entire control infrastructure. Scope of delivery & technical data: 7x Driverless transport vehicles (DTV): 5x Year of manufacture 2008 2x Year of manufacture 2016 1x Central control center: Including control PC and software. Current status & availability: Availability: The entire system is currently fully integrated into production and can be inspected under operating conditions after consultation. The planned dismantling/replacement will take place in 07/2026. After that, the system will be ready for collection. Njdpfxoy Sx Iwe Af Selg Condition: Six of the seven vehicles are currently in daily operation. The seventh vehicle has a defect in the central control unit and is currently being used as a source of spare parts. Individual sale: Individual sale of vehicles is possible after consultation for €4,000.

Condition: new, Year of construction: 2014, functionality: fully functional, Lightweight robot, Cobot KUKA iiwa 14 R820 Sunrise, cabinet, new/original packaging Serial number: 981258 Year of manufacture: 12/2014 Number of axes: 7 Max. payload: 14 kg Max. working range: approx. 820 mm Scope of delivery: Robot, controller, cables, teach panel Used item – normal signs of wear. Further details, article numbers and pictures available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Nsdpfx Aozmtrqsf Selg Due to the weight and size of the robot, it could be shipped within Germany for €95 gross. Shipping costs to foreign countries on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2425988, load capacity: 227 kg, lifting height: 5,790 mm, platform length: 1,630 mm, platform width: 660 mm, overall weight: 1,312 kg, transport length: 1,780 mm, transport width: 810 mm, transport height: 990 mm, fuel type: electric, tire size: 12x4x8, color: red, Technical Data Year of manufacture: 2019 Engine: Electric Working height: 7.79 m Platform height: 5.79 m Platform extension: 0.91 m Platform dimensions (L x W): 1.63 m x 0.66 m Nlodpszl Rp Rofx Af Sjg Overall dimensions (L x W x H): 1.78 m x 0.81 m x 2.10 m Weight: 1,312 kg Max. load capacity: 227 kg Load capacity with weight distribution: 114 kg Travel speed: 1.1 km/h - 3.1 km/h Max. climbing ability: 25% Fully functional General used condition Delivery available upon request Rental available upon request

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Nljdpfx Ajzp Ik Tef Ssg

Condition: new, functionality: fully functional, power: 7.35 kW (9.99 HP), color: yellow, empty load weight: 1,000 kg, shovel volume: 0.2 m³, Year of construction: 2025, 3-YEAR WARRANTY!! Modern Mini Excavator JOKER RS – professional grade and built to last. The JOKER RS model is the ideal equipment for demanding construction, electrical, plumbing, renovation, and service companies in related industries. The JOKER RS is additionally equipped with a swing boom, significantly facilitating work in confined spaces. We also guarantee service for the equipment after the warranty period has expired. The mini excavators are manufactured under the supervision of European technicians. The machine features a robust design and can be used in all conditions. TECHNICAL DATA: - Operating weight: 1000 kg - Bucket capacity: 0.02 m³ - Engine: Koop - Number of cylinders: 1 cylinder - Power / RPM: 10 hp at 3000 rpm - Maximum torque: 23.8 Nm at 3000 rpm - Maximum digging reach at ground level: 2890 mm - Maximum digging reach: 2940 mm - Maximum digging depth: 1650 mm - Maximum dumping height: 2600 mm - Maximum discharge height: 1970 mm - Maximum vertical digging depth: 1320 mm - Blade lift above ground: 325 mm - Blade drop below ground: 175 mm - Hydraulic lines for: hammer, auger DIMENSIONS: - Wheelbase: 910 mm - Track length: 1235 mm - Machine width: 930 mm - Track width: 180 mm - Track height: 320 mm - Total length: 2310 mm - Total height: 2195 mm PRICE: €6,302 net €7,500 gross - INCLUDES 3 digging buckets (20 cm, 40 cm, 80 cm) Njdsw Ufr Hepfx Af Solg - For machines that are regularly serviced by us, we extend the warranty to three years (Warranty only applies to machines purchased directly from us—not from other dealers) - FREE 12-month WARRANTY – after this period, we supply all original parts as needed! - We offer our own mobile service reaching all our customers in Germany and beyond - FREE delivery within a 200 km radius - SALE POSSIBLE EXCLUDING VAT (with valid VAT ID only) - FINANCING available KINGWAY DEUTSCHLAND e.K. is the exclusive stationary distributor of the Kingway brand in Germany. Only with us can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe as well as the main office of Kingway in Germany. We keep a large selection of machines in stock—around 70 models always available. We supply machinery across Germany, Austria, Switzerland, Italy, and other neighboring countries. Customers enjoy full access to all spare parts. Schedule an appointment and come for a test drive!

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Nlsdpfx Ajh S Uhfsf Ssg Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: a K+G Wetter SM-65STL meat grinder/cutter. The machine is entirely made of stainless steel and is ready for immediate use. Power: 380V, 50A, 25kW. Knife shaft with infinitely variable speed adjustment, range 50-5000 rpm. Mixing speed (reverse), range 50-500 rpm. Bowl with 2 speeds, 9/18 rpm. 6-blade knife head. Without a deflector plate. Further details upon request. Payment by cash or prepayment! Nljdpezxqpwefx Af Sog Sale only to commercial customers. No guarantee, no warranty.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, The Automatic Grinder G 160 is ideal solution for optimum product processing at medium and large enterprises in particular. It's designed for fresh meat, but is capable to process blocks down to -5 degrees. Hole plate, mm: 160. Hopper capacity, I: 530. Max fresh meat production output in kg/h: 8,000. Max. mixing capacity, kg: 350 Nlsdextnl Sspfx Af Sjg

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Nedpotv Rm Sofx Af Solg Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: used, functionality: fully functional, color: red, overall weight: 83,000 kg, Year of construction: 1996, operating hours: 14,000 h, machine/vehicle number: 72632, Exchange engine with 10,000 operating hours. Undercarriage and bucket in good condition. Nedpfx Aszibkaef Sjlg Location: Göttingen.

Condition: excellent (used), This makes FAG Detector III extremely useful for detecting: - unbalance and alignment errors. - rolling bearing defects. - damage to gears. Nodpfovb Id Iex Af Selg

Condition: refurbished (used), K+G Wetter WW130 Njdpfep Auausx Af Selg The machine has been fully overhauled by us. The machine is available on site. Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the provided information and prices cannot be guaranteed. Warranty and/or liability are excluded. The machine remains our property until full payment is received.

Condition: used, K+G Wetter Bowl Cutter Nedpfxjx A Tx Ns Af Selg -Type: SM 90 -Power: 33 kW -Bowl capacity: 90 L -2 bowl speeds -Power supply: 380V 50Hz -Weight: 1420 kg -Made of stainless steel -Dimensions: 2000 x 1400 x 1600 mm -Sound-absorbing enclosure (Plexiglas) -Stock quantity: 1 -Condition: Used in very good condition, overhauled, ready to work

Condition: new, ABB gas flow meter Nlsdjzabmwjpfx Af Ssg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Nlodpfxsx D Rxpe Af Seg Application Types Cutting