Used Rohr Floating Dredger for sale (376)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: Iodod E Ixzepfx Ag Ieat • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus Iaedex R Uw Sspfx Ag Ist * Working width: 1200 mm, Cutting thickness:

Condition: used, functionality: fully functional, power: 87 kW (118.29 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 9,900 kg, chain condition: 80 %, Year of construction: 2015, operating hours: 10,900 h, Equipment: all wheel drive, cabin, hydraulics, onboard computer, We are offering a Volvo L50G wheel loader for sale. The wheel loader was imported from Switzerland and comes from first ownership. It has been regularly maintained and includes the original registration certificate (TP). If required, we can arrange for technical inspection (TÜV) and vehicle registration. The wheel loader is available immediately and can be delivered directly. Ijdpfxoy R I Tte Ag Ioat Technical data: Engine: Four-cylinder turbocharged Volvo D4H, 87 kW Year of manufacture: 2015 Operating hours: 10,947 Weight: 9.9 t Attachments: Hydraulic quick coupler 1x front bucket, 223 cm, 1.8 m³ 1x pallet fork Features: Cab, lighting, beacon, on-board computer, air-suspended driver's seat, air conditioning, bucket float function, hydraulic connections on the boom for additional equipment Transport dimensions: Length without bucket: 6 m Width: 2.2 m Height: 2.98 m Weight: 9.9 t The price is exclusive of VAT. After prior agreement, loading and cost-effective transport to the destination can be arranged.

Condition: used, Year of construction: 2019, Electrically heated rapid steam generator. The water level in the feed water tank is regulated by a float. A pump transports the feed water into the boiler, where the water level is regulated by an electronic control system. When a certain water level is reached, the resistance heating elements switch on automatically. The heating output can be adjusted in three stages on the housing. Additional title: electrically heated steam supply Saturated steam capacity: 82 kg/h Heating output 1-, 2- or 3-stage: 20+20+20 kW Heating area: 0,566 m2 Mox. operating pressure: 8 bar Power: 60 kW Current: 86.6 A Voltage: 400 V Frequency: 50 Hz Length: 1074 mm Width: 770 mm Iodpfx Ajxf D Igog Ijat Height: 956 mm Weight: 340 kg Base construction: auf Füßen stehend, in Gehäuse Features: electric resistance heating; feed water vessel and desludging tank in the housing

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2 kg, Hello, We have Unitronics controllers that are brand new, packed in their original boxes, and have never been installed. These are surplus stock items. Product Description Details Attachments Delivery Vision700 OPLC – PLC controller with 7.0'' color graphic and text HMI panel - 7-inch color touchscreen panel - Reliable controller for any industrial equipment - Complies with international standards - Designed for operation in industrial environments - Built-in SD card slot (supports 1 GB to 32 GB) - Integrated Ethernet port - Integrated RS232/485 port and miniUSB General Power supply: 12 or 24VDC Battery: Lifespan of 7 years at 25°C Memory: 2MB for the ladder program, 60MB for images, 1MB for fonts Ladder program capacity: 8192 coils, 4096 registers, 512 long integers (32 bit), 256 double words (32 bit unsigned), 64 floats, 384 timers (32 bit), 32 counters, additionally: 1024 X-bits, 512 X-integers, 255 X-long integers, 64 X-double words Data table: 120KB dynamic data, 256KB ROM data (read-only) Ports: 1x RS232/485, 1x miniUSB, 1x Ethernet Inputs/outputs: none Protection rating: IP66/NEMA4X (front panel) Operator panel Iedpfx Asycfxieg Ieat Type: TFT LCD, 65,536 colors Resolution: 800x480 pixels, 7.0" touchscreen

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Iedpfx Ajy Rq Aweg Isat Individual items from our systems are available for separate purchase and integration into existing customer systems. Please contact us to discuss your project or to set up a site visit.

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), first registration: 08/2013, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, overall weight: 2,300 kg, axle configuration: 4x4, brakes: other, color: red, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Isdpfxjw U Afko Ag Isat You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. Iedpfjxl Snusx Ag Ijat You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 159,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle – additional charge €11,500 for Mulag attachments * From first owner * Condition as per photos * Only 8,682 original operating hours * Front and rear PTO shafts * Municipal hydraulics at front and rear * Front mower * Mulag MRS300 boom * Mulag RMK1200 verge mower head * Rear mower * Mulag MHS800 rear boom * with Mulag MK1200 mower head * Municipal and rear hydraulics * Rear three-point linkage * Mulag MRS 300 verge mowing implement * Ideal for mowing in roadside areas, suitable for both left and right side operation * Front three-point hitch mounting * Reach up to 3.00 m * Powered via front PTO * Electro-hydraulic control * Mower head float * Ground speed-dependent sensing system * RMK 1200 verge mower head * Working width 1,200 mm * Telescopic MHS 800 rear boom mower * Lateral shift 1,600 mm * Left and right reach 8.70 m * Automatic terrain contour following * High-clearance portal for passing obstacles up to 3.90 m * Single-hand control unit with multifunction joystick * Quick-release system * Mulag MK 1200 flail mower head * Total width 1,580 mm * Boom utilization monitoring * Comfort cab with two seats * Air conditioning * Front window heating * Outside temperature display * Comfort driver’s suspension seat * Electrically heated mirrors * JCB PowerShift transmission with three powershift stages * Disc brakes * ABS * Differential lock * Warning beacons * Distant warning indicator * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor (agricultural tractor) * Wheelbase: 3,000 mm * Gross vehicle weight: 12,000 kg * LOF registration When selling to commercial customers and for export (EU and non-EU), the German commercial code applies. If desired, we can provide a quote from our partner workshops for a new TüV inspection. Our offer is generally WITHOUT new TüV inspection, without new DGUV, without new SP, without new UVV. Iasdpfxevhqbco Ag Iet More trucks can be found on our homepage. We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misconceptions regarding condition or suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information provided without guarantee. We assume no liability for errors or erroneous statements in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Iedpfx Agoylp S Ej Isat Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Iajdpfx Asn Hx Tleg Iot Stock no:2001650BXA Price: 200000 SEK

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 15511601/120, functionality: fully functional, travel distance X-axis: 4,045 mm, travel distance Y-axis: 2,490 mm, travel distance Z-axis: 317 mm, workpiece length (max.): 4,045 mm, workpiece width (max.): 2,490 mm, workpiece height (max.): 317 mm, number of slots in tool magazine: 12, table length: 3,100 mm, table width: 2,200 mm, Equipment: CE marking, documentation/manual, HOLZ-HER Horizontal-Nesting-CNC Dynestic 7507, Baujahr 2018, Lieferung ab Standort Enthalten: Software Campus V7 CAD/CAM, 1 Floating License CAMPUS V7 „Better Nest“ für rechteckige Bauteile High-Speed-USB-Server Handbedieneinheit Bedienpult mit 21,5" 16:9 Flachbildschirm Bohrkopf 7884, 14 Spindeln 10/4 inkl. Nutfräse Guscugw Njy Nzubouob Fräseinheit 7830, 8 kW (S6/40) Werkzeugwechsler, 6 Positionen, Pick-Up-Ausführung Werkzeugwechsler 7872 mit 1 Werkzeugfach, in X- und Y-Richtung schwenkbar Ijdoy Nzubopfx Ag Ieat Winkelgetriebe 7868 Individuelle Hinteranschläge ECO Vac – intelligentes Vakuumsystem Vakuumpumpe 3 x 140 m³/h = 420 m³/h, luftgekühlt Sicherheitslichtschranke Zentralschmierung, manuell EasyLabel-Drucker 1 zusätzliche Bearbeitungsstation A, hinten mit Anschlag Wärmetauscher zur Steuerungsschrankskühlung, max. 32 °C DC-Notstromversorgung (USV) Personensicherheit durch vertikale Sicherheitslichtvorhänge an allen vier Seiten der Maschine, für optimalen Zugang zum Maschinentisch. Manuelle Schmierung – Schmierstellen für alle Linearführungen in X, Y und Z sowie für alle Kugelgewindespindeln in X, Y und Z. Zusätzlicher Vakuumanschluss für 10 Vakuumsauger inkl. Wechselschlauch Vakuumsauger

Condition: excellent (used), Year of construction: 2022, • Cutting height 2200 mm x cutting length 4300 mm • Extraction to CE TRK Regulations CH 2200 (less than 2 mg of fine dust/m³ air) • Middle workpiece support - 4 zones • Sliding carriage 1255 for cutting height 2200 mm • Saw unit 4,0 kW, 5400 min-1, 400 V, 50 Hz incl. HW-saw blade Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Length stop (manual) with digital read out for vertical cuts. For middle workpiece support • Digital display for horizontal cuts at the control panel incl. electrical fine adjustment • 3 adjustable stop points in the saw beam for repeating horizontal cuts via stop point • Strip stop for repeating horizontal cuts, Scale in mm, max. strip height 650 mm Ijdoy Nmtcspfx Ag Ioat • Narrow part device (2 pcs) Avoids tilting of workpieces • Super Cut scoring device: For scoring the surface of covered materials. • Cutting optimization Opti-Base V-Cut 1 pc 10ˇTouch-screen 1 pc Software machine 1 pc Software office- 1 place floating network license (Opti V-Base) 1 pc label printer • Specifications are provided for information only.

Condition: used, mileage: 571,610 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: Rohr fresh goods box body * Cooling unit: Carrier Easy Cold Supra 850 with 4,250 operating hours/hour meter, temperature recorder * Power connection for electric cooling * Tail lift by BÄR, 2.5 t, 2,450 mm, aluminum platform * Turn-assist camera * Reversing camera * Automatic traction chains on rear axle as traction aid * Fully air-suspended chassis * Deep coupling system * Front axle: 8.0 t * Audio system: CD radio * Exhaust outlet downwards right * Brake connection standard and DuoMatic * Compressed air connection in cab * Aluminum air reservoir * Reinforced engine brake * Steerable and liftable trailing axle * Fleet management system interface * Cab seats: driver's seat air-suspended comfort seat * External sun visor * Sunblind for side window, driver's door * 12V socket in passenger footwell * Additional 24V socket in passenger footwell * Preparation for 2nd control unit for level regulation Additional equipment: * Emission standard EURO 6C * Axle configuration: 6x2/4 * Actros 4 * Trailer brake 2-line, connections left * Trailer socket 24V / 15-pin * Exterior mirrors electrically adjustable and heated * Rear axle differential lock * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: Brake Assist (Active Brake-Assist) * Driver assistance system: Lane Keeping Assist * Cab: width 2.30 m, Cab: L * Cab: steel-sprung, comfort * Cab floor with 320 mm engine tunnel * Suspension: air / air (full air suspension) * Electric windows * Tinted windshield * Transmission: 12-speed - Type: G 211-12, PowerShift * (AdBlue): 60 liters * Manual roof hatch (steel) * Lower comfort bed, central locking system * Communication interface * Fuel tank: 630 liters aluminum * 2-stage air compressor * Engine: 10.7 liters - 290 kW inline 6 diesel (OM 470) * Engine compartment encapsulation * Residual heat utilization * Disc brakes front and rear axle * Voltage converter 24V/12V 10 A * Front axle stabilizer * Additional stabilizer, rear axle/trailing axle * External storage compartment, left * Cab socket 24V * Tachograph / EC control device * CB radio preparation * Toll collection preparation * Auxiliary heater (water) * Additionally, we offer the Rohr trailer, first registration 12/2018, type RZAK/18, for sale at a net price of €10,000 plus VAT. Iodpoyza Hyjfx Ag Ijat * Dimensions: 7,360 x 2,450 x 2,450 mm * Through-loading capability (pneumatic open and close) * Tail lift by BÄR, 2.5 t, 2,350 mm, aluminum platform * Cooling unit: Carrier Supra 850U with 3,640 operating hours * Mileage: 467,050 km * Temperature recorder * Night socket * Disc brakes * Extendable drawbar * Payload: 10,980 kg * Unladen weight: 7,020 kg * Gross vehicle weight: 18,000 kg * Errors, changes, and prior sale excepted

Condition: used, mileage: 497,987 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: Rohr refrigerated delivery box body * Refrigeration unit Carrier Easy Cold Supra 850 with 3,740 operating hours/hours, temperature recorder * Power connection for electric cooling * Tail lift BÄR 2.5 t 2450 mm aluminum platform * Turn assist camera * Reversing camera * Automatic traction chains on rear axle as starting aid * Full air suspension chassis * Low coupling system * Front axle 8.0 t * Audio system: CD radio * Exhaust outlet down to the right * Standard and DuoMatic brake connections * Compressed air connection in cab * Aluminum air tank * Reinforced engine brake * Steerable and liftable trailing axle * Interface for fleet management system * Driver’s cab seats: Comfort air-suspended driver’s seat Iajdpfjyyrqzex Ag Ist * External sun visor * Sun roller blind for side window, driver’s door * 12V socket in passenger footwell * Additional 24V socket in passenger footwell * Preparation for second control unit for level regulation Additional equipment: * Emission standard EURO 6C * Axle configuration: 6x2/4 * Actros 4 * Trailer brake 2-line, connections on the left * 24V / 15-pin trailer socket * Electrically adjustable and heated exterior mirrors * Rear axle differential lock * Driver assistance systems: Attention Assist (fatigue detection sensor) * Driver assistance system: Brake Assist (Active Brake Assist) * Driver assistance system: Lane Keeping Assist * Cab: Width 2.30 m, size L * Cab: steel-sprung, comfort version * Cab floor with 320 mm engine tunnel * Suspension: air / air (full air suspension) * Electric windows * Tinted windscreen * 12-speed gearbox - Type: G 211-12, Power Shift * (AdBlue): 60 liters * Manual tilting roof (steel) * Lower comfort bunk, comfort central locking * Communication interface * Fuel tank: 630 liters aluminum * 2-stage air compressor * Engine 10.7 L - 290 kW R6 diesel (OM 470) * Engine compartment encapsulation * Residual heat utilization * Disc brakes front and rear axle * Voltage converter 24V / 12V 10A * Front axle stabilizer * Additional stabilizer, rear / trailing axle * External left side storage hatch * 24V socket in cab * Tachograph / EU control device * CB radio preparation * Toll collection system preparation * Additional heater (water) * Additionally to the truck price, we are selling the Rohr trailer, first registered 12.2018, type RZAK/18 for 10,000 EUR net plus VAT. * Dimensions: 7360x2450x2450 mm * Through-loading capability (opening and closing pneumatic) * Tail lift BÄR 2.5 t 2350 mm aluminum platform * Refrigeration unit Carrier Supra 850U with 3,410 operating hours * Temperature recorder * Night-time plug socket * Disc brakes * Extendable drawbar * Payload 10,980 kg * Unladen weight 7,020 kg * Perm. gross weight 18,000 kg * Subject to errors, changes, and prior sale.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. Iajdefn N U Hepfx Ag Iot The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: like new (used), Year of construction: 2016, operating hours: 101 h, load capacity: 1,400 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,920 mm, Manufacturer + model: STILL EXP 14 ATEX * EX * Mitrex - 2GD - Zone 1 and 21 and 22 Mast: 2F2900 ID: 22123.0042 Category: Demo Mast: 2F2900 Lowered height: 1920 mm Lifting height: 2900 mm Capacity: 1400 kg Year: 2016 Operating hours: 101 hours Battery capacity: 24 V / 345 Ah Options *EX* Mitrex !!!!! System = ATEX 94/9/EC - Compliant with 2014/34/EU Gas group = IIB + IIIB Type 2GD - Exd dB 11B T5 Gb (approved for Zone 1 and 21 and 22) Temperature class = T6 (85°C) Wide track *EX* version - Proportional lifting & lowering valves - with free-floating adjustable forklift forks - Suitable for all types of pallets - Also equipped with Adjustable support legs Iaedpfsy Ir N Hex Ag Iet Power steering

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. Iaodpfx Aex D Iuzjg Iot • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: excellent (used), Raimann Variorip 310M multirip saw, Year of manufacture: 2013, 1 floating saw blade, Quickfix system, Track width: 340 mm, Max. material infeed width: 650 mm, Max. cutting height: 100 mm, Feed speed: 5-35 m/min, Motor power: 37 kW, Max. blade diameter: 350 mm, 2 lasers, Extraction diameter: 250 mm, Iaedpfjy H Dz Eex Ag Iot Weight: 2100 kg, Very robust and high-quality machine, top-level quality.

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Iaodpfxex Twcvj Ag Ijt

Condition: used, mileage: 27,105 km, power: 62 kW (84.30 HP), first registration: 03/2022, overall weight: 4,800 kg, fuel type: diesel, color: silver, axle configuration: 4x2, maximum load weight: 1,850 kg, empty load weight: 2,950 kg, next inspection (TÜV): 11/2026, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, onboard computer, parking sensors, soot filter, * German vehicle * 1st owner * Original 27,105 km * Only 3,310 operating hours * Condition, see photos * Ideal for narrow streets, pedestrian and cycle paths, extremely maneuverable thanks to articulated steering * 3-brush sweeping system – 2 side brushes left and right Ø 800 mm – shock-resistant brush mounting * Third front brush for a sweeping width of 2,700 mm and for cleaning corners and ramps, usable on both left and right * Floating, wide suction mouth made of cast aluminum between the front wheels * Debris container made of stainless steel, hydraulically tiltable and closable, capacity 2.0 m³ * Smart-Con control unit: multifunction armrest with Smart-Start function enables operation of all work functions single-handedly * Comfortably sprung, sound-insulated aluminum cabin with two seats * Infinitely variable hydrostatic drive. Two driving modes with automatic, load-dependent electronic control. * Air-conditioning * Road speed 50 km/h * Working speed up to 15 km/h * Emissions standard Euro 6d * Engine displacement 2,970 cc with 62 kW * Fuel tank 80 L * Parking assist camera * Side cameras left & right * Rotating beacon * Additional headlights * Heated exterior mirrors * Wheelbase: 1,900 mm * Gross vehicle weight 4,800 kg * Curb weight 2,950 kg * Payload 1,850 kg * Self-propelled working machine If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Iodpfxoy E Tuxs Ag Isat Our offer is generally WITHOUT a new TÜV inspection, no new DGUV, no new SP, no new UVV. You can find further commercial vehicles on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to ensure the buyer has a correct understanding regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, comprising: 8 large storage racks, make: HEGLA, model: FLB, load capacity: 40,000 kg each, for lengths up to 6,000 mm; tilting table/glass loader, make: HEGLA/HAGER, year of manufacture: 1988, serial no. 0880342; float glass cutting and breaking table, make: HEGLA; cutting bridge, make: HEGLA, model: OPTIMAX 6032ES, year: 1996, serial no. 6079, own weight: 6,500 kg; stacking table, table area: approx. 3200x6000 mm, with operator terminal, PC tower, monitoring monitor, safety cage and light barrier system. Iaedpfx Ajy Aqa Hog Ist

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 7,101 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, gearing type: hydrostat, tire condition: 80 %, overall weight: 8,900 kg, empty load weight: 5,900 kg, color: blue, maximum load weight: 3,000 kg, axle configuration: 4x4, number of seats: 1, brakes: other, chain condition: 80 %, drive condition: 80 %, shovel volume: 5 m³, emission class: none, Equipment: ABS, CE marking, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, differential lock, full service history, gripper hydraulics, head guard, hydraulics, lighting, onboard computer, pallet forks, retractable fork, soot filter, traction control, Authorized Subaru dealer in Łaziska Górne is offering for sale a freshly imported telescopic handler. Brand: GENIE GTH 3007 – robust and reliable 4x4, perfect for construction, agricultural, and industrial applications. The machine is in excellent technical condition, comes from a well-funded Czech state-owned company, and has been serviced exclusively with genuine parts. Fully operational and ready for immediate work, featuring low operating hours. The price includes a full set of documents for registration. We offer every form of payment: Leasing, financing, cash, and bank transfer. Iedpfoywaqdsx Ag Isat With immediate payment by cash or bank transfer, you can drive away with your vehicle from the showroom. Additionally, we provide insurance services – we will calculate the lowest premium for any vehicle – TRY US! We also deliver purchased cars and trucks to any address throughout Europe. For further information about our services, please contact our sales representatives. TECHNICAL DATA: Maximum lifting capacity: 3,000 kg Maximum lifting height: 6.89 m Maximum reach: 4 m Length: 4.71 m Width: 1.99 m Height: 2.07 m Operating weight: 5,900 kg EQUIPMENT: Bucket for loose materials 500/800 L bucket Floating forks L=1200 mm (100x50 mm) Hydraulic quick coupler for attachments FEATURES: Pneumatic off-road tires Rotating turret Ergonomic, adjustable joystick and steering wheel Operator seat with presence sensor Air conditioning Clear dashboard indicators in the cab Cab roof window Strobe warning light Overload protection system (visual + audible) Machine inclination indicator Front stabilizer outriggers Main electrical line on the boom Special air filter The listed price is net and applies to export and business customers. Significant discount possible for private customers – Please contact us directly by phone for your best price :)

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) Iaodsy E Etyspfx Ag Ist - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Please contact Marius Herden for more information.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, loading space length: 3,200 mm, loading space width: 2,150 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your authorized ISUZU specialist dealer with expertise, service, and consultation offers you: ISUZU NPR with automatic transmission + torque converter and hooklift with remote control 3-year warranty on the chassis from the date of first registration or up to 100,000 km PAYLOAD: 3,700 kg with a gross weight of 7,490 kg or 4,700 kg with a gross weight of 8,500 kg IMMEDIATELY AVAILABLE!!! Features: - 5.2 L turbo diesel engine with common rail direct injection, 140 kW / 190 hp, EURO VI OBD-E (max. torque 510 Nm at 1,600–2,800 rpm) - Automated manual transmission (NEES II) with 6 gears; wear-free, precisely controllable starts thanks to the torque converter! Gears can also be shifted sequentially using the selector lever. Depending on load conditions, the driver can select whether to start in 1st or 2nd gear by pressing a button. - Power steering, 24V electrical system - Short wheelbase 2,765 mm, turning radius 5.30 m - Engine brake, cruise control - ABS with EBD and electronic rear axle traction control (ASR) - Electronic Vehicle Stability Control (EVSC) system - Lane departure warning, Emergency Braking System (AEBS) - Tyres: 215 / 75 R 17.5 (M+S) - Air conditioning - Suspension driver seat, passenger double bench, 3-seater cabin - Electric windows - Electrically adjustable and heated exterior mirrors, electronic immobilizer - DAB+ radio with Bluetooth hands-free, digital EU tachograph - Fog lights, daytime running lights, automatic headlight control - Driver airbag, headrests - Height and tilt-adjustable steering wheel, interior mirror - Manual idle speed control in the cab - Central locking with remote control - Spare wheel, supplied loose Body: Telescopic hooklift CTS 05-28 Hook height 900 mm, body CE certified Articulated hook arm Operation via control panel with remote control Pulling force 5,000 kg Hydraulic locking of hooklift in transport position Automatic mechanical hook safety, load holding valves on all hydraulic cylinders, emergency stop function Side and rear underrun protection, plastic mudguards with splash flaps, side marker lights PTO/single-circuit hydraulic system complete with hydraulic pump, oil tank, lines Main inspection/single approval/weighing Delivery checks: vehicle and body inspection, refuel with diesel + AdBlue Vehicle additional equipment: Underbody and chassis conservation Ball head coupling, 3.5 t trailer load 1 LED work light 2 toolboxes mounted on the chassis Extras package 4 NPR Automatic (rubber floor mats, nets for upper storage compartments in the cab, perforated plate cover for SCR system, rear engine cover in the cab, safety package: warning vest, warning triangle, warning lamp, first aid kit) Additional LED headlights with dipped beam incl. indicator lights on the cab roof (for front-mounted equipment incl. certification) 3-pin socket at the front Red-white warning markings, 1 set = 4 pcs LED lightbar with 2 beacons, 1500 mm Professional engine-driven hydraulic system with 2 double-acting control circuits at the front and 1 working circuit at the rear, driven via an engine-dependent gear pump and toothed belt drive, 4 hydraulic connections at the front (raise/lower/floating position/slew), supply and return line at the rear of the cab, flat-sealing leak-free hydraulic couplings, pressure relief valve for easy equipment changes, temp... Iasdpfjy E Daljx Ag Iot