Used Rm Gastro Rm-Spi 780 Es for sale (14,118)

Condition: ready for operation (used), Grundig NPP04 44209-780.04 / KPL.-782.04 (02) circuit board SN: 9507, used, in good condition, 100% functional, scope of delivery as per photos. Hsdpfx Aksy Nqbks Uofl

Condition: ready for operation (used), Heller uni-Pro 24.000914 monitor with 20.003 / E 23 control card, used, in good condition, 100% functional, scope of delivery as per photos Hsdpfxey Nrwas Ak Uofl

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 06/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel Hfedey R Ipnepfx Ak Ujl * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: ready for operation (used), DMU SK40 motor spindle with variable speed from 20-12,000 RPM. Serial number: 10222292. Used, shows significant signs of wear, but 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Hfodpfxek Ru Dko Ak Uol

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment Hsdpok Talpefx Ak Usfl - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 01/2027, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale! Hsdpfjmnp Afox Ak Ujfl

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm Hfsdomv Ehzepfx Ak Uol - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Hfodpjhp Rc Isfx Ak Uel Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD Hedpfoiyx Uzjx Ak Uefl main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: ready for operation (used), Fanuc DC spindle motor, Model 15. Please note: the nameplate is no longer legible. Used, shows significant signs of wear, but 100% functional. Hfsdpfx Aji D Hvqsk Uel PLEASE NOTE: Please request a separate quote for packaging and shipping costs!

Year of construction: 2026, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Hodsi E Hp Tepfx Ak Uefl Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Hjdpod Sg Hcsfx Ak Uofl Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: good (used), Measuring range: 5 - 305 mm Hedpfx Akod Ex N Ij Uefl Serial Number: 2466

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Hfjdeqww Icepfx Ak Uel

Condition: ready for operation (used), Siemens 6ES7357-4AH03-3AE0 FM357-2 System Firmware L Version: 05.03.01 SN:T-SNDU00418 on 6ES7951-1KM00-0AA0 Memory Card E-Stand: 2 SN:SVPS7113243, the plastic cover on the head is missing see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Hfjdpfx Aep Ehdmek Ujl

Year of construction: 2001, condition: good (used), VMI 3500L mixing vessel Hjdpfxeqqhhxo Ak Uofl 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

Condition: ready for operation (used), Maho electronic handwheel with spiral cable, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hfsdpji Ebz Eofx Ak Ujl

Condition: ready for operation (used), Schoppe & Faeser AEC 200 transducer, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hsdpfx Akji Ec Ibo Uofl

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm Hjdodnzvdspfx Ak Usfl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x1100x1160 mm Weight 950 kg Hfjdov A E H Nopfx Ak Uol Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8800x2900x2100 mm Hjdpjv A Hcrjfx Ak Ujfl Weight 6500 kg Total power requirement 18-36 kw

Condition: used, empty load weight: 355 kg, overall weight: 1,600 kg, color: yellow, Year of construction: 2004, Trailer with water tank: + Blanchard + First registration: 16.02.2004 + Height-adjustable drawbar + Car coupling + Single axle + Unladen weight: 355kg; permissible GVW: 1,600kg + 1,000l water tank + 2x Hatz diesel engines with electric start -> 1B30, 7hp with pump and spray bar -> 1B40, 9.8hp with pump (provides low pressure) & hose reel Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Hfodpfxsy E Rarj Ak Usl Errors and omissions possible, interim sale reserved!

Condition: ready for operation (used), Fanuc A06B-0856-B300 spindle motor, serial number: C017K0796, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Hodey U Efzspfx Ak Usfl

Condition: used, mileage: 192,770 km, power: 338 kW (459.55 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 14,250 kg, maximum load weight: 11,750 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, next inspection (TÜV): 06/2026, brakes: intarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 5,350 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, trailer unit, 1 comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), intarder, auxiliary drive, automatic transmission, differential lock, fog lights, work lights, rotating beacon, storage compartment, leaf and air suspension, rear axle liftable and steerable, trailer hitch with air, light, and hydraulic connections, lashing eyes, underbody protection, swing-out tailgates, roof hatch, crane behind the cab, emergency stop, crane control, foldable, elevated platform, 2-point hydraulic support, remote control, 5 hydraulic extensions, green environmental badge. Wheelbase: 3900 mm, Body: 3-way tipper body with aluminum side walls & Hiab X-HiDuo 188 ES-5 crane with remote control (remote control), Transmission 12 TX 2621 TD with intarder! Load chart: 4.6m - 3400kg, 8.4m - 1640kg, 14.7m - 840kg! Hedjy U Id Tepfx Ak Uofl Loading height approx. 1370mm! Pallet fork available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards Hfodezhd Ncspfx Ak Uol * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe