Used Revolving Centering Points 5 Pieces for sale (73,462)

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Kedjv T T Ipopfx Anuonc -Manufacturer: Bruckner, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Kedpfey Diabsx Anuonc

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg Ksdpfstxku Iox Anusnc

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light Knjdpozzp Taefx Anusc - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control - HEIDENHAIN ACC "Active Chatter Control" active chatter suppression

Condition: good (used), Year of construction: 2006, Technical details: X 1000 mm Knodoych D Uepfx Anusc Y 1150 mm Z 895 mm 15.000 rpm, HSK 63, 92 places in tool changer, Touch probe will come, laser measuring system. Coolant thru spindle. Parts shown by hand not come. Parts shown by hand not come.

Condition: good (used), Year of construction: 2017, Main spindle changed 2025. Technical details shown on photo. Parts shown by hand not come. Knsdpfey S U Tcex Anuec

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver Knodpem U A Eiefx Anusc -Front face driver: Mount: MK4 -Front dimension: Ø 32 mm -Dimensions: Ø 55 x 212 mm -Weight: 1.8 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees Kodpfey Thlnex Anuenc 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller cage, cylindrical roller cage -Manufacturer: INA, Axial cylindrical roller bearings, axial needle roller bearings, 5 pcs., unused, original packaging -Type: AXK 150190 A -Outer diameter: 190 mm Kjdpfx Anov Sprneuonc -Inner diameter: 150 mm -Dimensions: Ø 190 x 5 mm -Price per pack of 5 pieces: 200 euros -Stock: 4 package units and 2 individual items -Weight: 0.2 kg/piece

Condition: used, flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle -Pipe bend: welding bend 90° 5 pieces -Type: EN10253-1 S235 Ø 159.0 mm -Price/Delivery: complete -Stock: other sizes/types also available, please ask -Dimensions:410/195/H160 mm Knjdotxkwcjpfx Anuoc -Weight: 6.3 kg/piece

Condition: used, Year of construction: 2017, x-travel 620 mm y-travel 520 mm z-travel 460 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 300 kg spindle taper SK 40 spindle turning speed range 12.000 U/min feed range 1 - 20.000 mm/min rapid traverse 36 m/min coolant IKZ 30 bar voltage 400 V total power requirement 25 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 2,35 x 4,15 x 2,95 m chip conveyor 2,60 x 1,65 x 1,20 m Oil cooler 0,50 x 0,70 x 1,45 m water cooling unit 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor Knsdpfx Ajp S Db Senujc - suction

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Ksdpfx Anou S Tbzeuonc -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Condition: used, flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle -Pipe bend: welding bend 90° 5 pieces -Type: EN10253-1 S235 Ø 219.10 mm -Price/Delivery: complete Kodpfxjtxkwis Anusnc -Stock: other sizes/types also available, please ask -Dimensions:410/195/H160 mm -Weight: 17 kg/piece

Year of construction: 2002, condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Knjdpfxoppwnqs Anusc

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT ATTENTION: The machine is located in Sydney / Australia! Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts. Machining area: 3700 x 2200 mm. The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface. Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm. Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups. 1000 m³/h vacuum capacity via VariAir pump (frequency-controlled). To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system. Power Label above the lifting table for panels up to X=4200 x Y=2200 mm. Touch Label Light - extra label printer under the operator screen for labeling small parts. The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table. Overhead laser for complex contours (laser color green). Screen: 21.5'' / 16:9 touch screen Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling. Barcode scanner Touch Tool - tool length measurement Cold Gun - tool cooling Kedpfxoz Hvy Ie Anuenc Delivery, installation, and training for the machine can be carried out directly by us for an additional charge. The machine is currently located at our branch in Sydney / Australia. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Year of manufacture: 2014 Colour: Grey Kedpfxeytcl Ij Anusnc Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, 5 axis machine QUASER MF400C/12C Year of production: November 2014 Installation date 2015 Table: ∅320 mm Passages: X- 410 mm Y- 610 mm Z- 510 mm A- +30° -120° C- 360° Ksdpfx Ajuclilonuenc Tool holder: BT40 Tool magazine: 30 pcs Max spindle speed: 12,000 rpm Cooling through the spindle Control: CNC SIEMENS SINUMERIK 828D Tool probe very good condition of the machine machine can be loaded on a standard truck height of the machine 275cm width 245cm length 300cm weight of machine 7300kg

Condition: like new (used), Year of construction: 2012, Parts shown by hand not come. With machine come tool holders SK 40. X 600 mm; Y 430 mm, Z 460 mm; A 150 deg x 0.001;C 360 deg x 0.001 12.000 rpm, Heidenhain iTNC 530 , 40 tool places in changer SK 40. Knjdpfx Ajlpcdwsnujc

Condition: excellent (used), Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread, lashing point , Loadbock thread with foldable rotatable load bracket unused Ovp -Type: VLBG 5 t M 30 Ident-No .: 850 08 13 -Carton: content 4 pieces -Quantity: 12 cartons available -Price: per box Kjdpfog Akamsx Anujnc -Weight: 15 kg / box

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm Kodpoy H Ncbefx Anuenc - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller model: FANUC Series 160is-MB, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm A-axis: -120 to +30° C-axis: 360° Spindle Speed range: 100 to 12,000 rpm Speed stages: stepless Spindle mount: 7/24 taper, size 40 Spindle bearing inner diameter: 65 mm Distances Distance from table surface to spindle nose: 70 to 530 mm Distance from column front to spindle center: 620 mm Table Work surface diameter: 350 mm Maximum workpiece weight: 200 kg Height of table surface above floor: 1,080 mm Feed rate Rapid traverse X- and Y-axis: 48 m/min Rapid traverse Z-axis: 36 m/min Rapid traverse A-axis: 22.2 rpm Rapid traverse C-axis: 33.3 rpm Working feed rate X, Y, and Z-axis: 1 to 36,000 mm/min Ksdpszpxgrsfx Anuonc Working feed rate A-axis: 22.2 rpm Working feed rate C-axis: 33.3 rpm Tool changer Tool mount: JIS B 6339 BT40 Pull stud: MAS 403 P40T-1 Tool magazine: 20 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent positions occupied: 82 mm Max. tool length from reference line: 300 mm Max. tool weight: 7 kg Tool change time, chip-to-chip: 1.2 s Tool change time, cut-to-cut: 3.8 s MACHINE DETAILS Control model: FANUC Series 160iS-MB

Condition: excellent (used), functionality: fully functional, Working area: 4840 mm x 1500 mm Electrospindle: 12 kW, ISO 30 Knedpoyinp Nefx Anusc Automatic tool changer: 8 positions Blade diameter: 250 mm Pendulum machining Number of vacuum pumps: 2, capacity: 300 m³/h

Condition: excellent (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Quantity: 3x Sassex/WMW drill chucks -Recording: MK6 -Total length: 600 mm -Pin holder: Ø 12 mm -Pen spacing: 77 mm -2x Sassex/WMW drill bit holders -Recording: MK6 -Total length: 620 mm -Pin holder: Ø 16 mm Knodec Iqrgjpfx Anusc -Pen spacing: 96 mm Price: for all 5 pieces -Weight: 56 kg

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick Knsdpfxsx Hwhxe Anuec - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm Kedju Uwwxopfx Anuonc -Weight: 40 kg