Used Rüttelautomat Mit Ausstreichwalze / Jogger With Air Removal Rollers for sale (41,056)

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Lhsdpfoxzg Sajx Abzsl Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor Lodpfxou Smq So Abzohl

Condition: used, • Load capacity: 350 kg • 6 suction cups, 250 mm diameter, adjustable • Vacuum suction cups can rotate 90° and tilt 90° • Suction cups with guide tube and electric traversing carriage • 2 units available, new and unused • Immediately available IV: + Design standards 1. The design of the system strictly complies with the European CE standard EN 13155: 2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVV I8 standard, with the most important design parameters exceeding the aforementioned standards. 2. Safety factor: The main structure has a safety factor of 4.0, the safety vacuum level is 65%, and the standard is 85%, which is 20% above the safety standard. V+ Equipment testing and standards 1. General matters Check whether all the materials are complete, whether the exterior of the equipment is painted or scratched, whether the suction cups are damaged, and whether the tube is damaged. Lhjdexnvq Eopfx Abzjl 2. Points checked before leaving the factory © Suction test of the equipment © Pressure retention test of the equipment © Alarm test © Various control components • Special price: €4,900

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Lsdszcvx Tjpfx Abzehl Includes Loadmaster.

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Lsdpjzbydwofx Abzshl Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Available: from approximately August 2026

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm Ledpfx Asxdmgvjbzohl CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Lodpfxsuzv Tzj Abzshl Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw Lsdpfx Abju Nz Dnjzohl weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar *

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Lhjdpowauaxefx Abzsl

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Ljdpfx Aoq Am Ivjbzshl

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Lhjdexgnx Sspfx Abzol

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Lodpfx Abex U Exuozehl

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Lsdewauarepfx Abzohl

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Lhodpfxjv Dm Eps Abzel Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: good (used), Semi Automatic Constant Heat Sealing Bag Machine 300mm heat seal line With foot pedal control Adjustable temperature control for different bag thickness Temperature range 30 to 200 degrees C 220 / 240 volts, 50 / 60 HZ With adjustable bag loader for different bah heights In excellent condition Price € 495 Ledpfxeutg Daj Abzshl

Condition: good (used), Saxon Bag Sealer Stainless Steel Lsdpfov Dm Dlex Abzjhl With Stainless Steel Conveyor 230 Volts Single Phase Power Height adjustable mast Mobile on castors Fixed adjustable feet also Conveyor belt dimensions 1500mm L x 400mm W Price € 5,950

Condition: good (used), - Type: GS - 250 - serial no.: 14 - Year of construction: 1999 - Dimension min.: L1100mm x W800mm x H900mm Ljdergqp Nopfx Abzjhl - max.: L1700mm x W1300mm x H900mm - Power type: 1 x 220V / 50HZ / 7.8 A - Connected load: 1500w / 2800 MIN - 1 kW - Price on request

Condition: good (used), Saxon Bag Sealer Stainless Steel Complete with stainless steel mesh belt conveyor Ledpozbnmgsfx Abzohl Variable speed control Adjustable Temperature control Suitable for heavy gauge bags Mesh belt 250mm wide Machine dimensions 1800mm Long x 800mm Wide Price € 6,950

Condition: used, Year of construction: 2018, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 160 x 130 x 130 cm - Details: - └ Description: Includes tank and dryer - Year: 2018 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ledpoyuga Esfx Abzjhl Yorick Diebels

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) Lsdpfx Aozav Ddsbzjhl - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: PAM8025B, This membrane Nitrogen Generator was removed by a factory 3 years ago and by that time it was fully functional. After this is stored. Lodpfx Asy R Sixjbzjhl

Condition: used, Year of construction: 2003, functionality: unexamined, This membrane Nitrogen generator was removed from a factory 3 years ago . By the time it was removed it was functional. after this is stored. Lhodpfsy R Sg Rex Abzjl

Year of construction: 1988, condition: used, Compressor unit, type 178 A CD E Delivery rate: 4760 l/min Operating pressure: 9 bar Power: 30 kW Ljdpfxjgw Dqpj Abzohl

Condition: new, For sale: ALU plates with certification from surplus warehouse and remaining stock. * - Description: ALU / AlMg4.5Mn (5083) with certificate -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 60 mm - Weight per plate: 911 kg - Purchase price per plate: €5,374.90 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * -----2x----- - Aluminium rectangular plate / AlMg4.5Mn (5083) with certificate - Length: 2205 mm - Width: 2504 mm - Height: 70 mm - Weight per plate: 1,063 kg - Purchase price per plate: €6,271.70 | €5.90/kg - * - Sale price per plate: €2,687 / negotiable - * * Prices are net, plus VAT. * The material is from surplus warehouse and remaining stock and is also available for individual sale. * IMPORTANT: Please note that, for logistical reasons, we are currently selling exclusively within Europe. This means all purchases and transactions are limited to customers within this geographic area. * “The seller excludes any warranty for the goods sold. The goods are sold as is, without any guarantee of suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods prior to purchase and are satisfied with their condition. The seller assumes no liability for any damages resulting from the use of the goods. Any claims of the buyer against the seller are excluded.” * Status: 11/04/2026 Ledpow Skr Tefx Abzshl * If you have any questions or require further information, please feel free to contact me at any time.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Lhsdpfoyyygkjx Abzsl Power: 3,200 W