Used Px170 Pto-Driven Wood Chipper for sale (12,555)

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Itedpfsyhzhhsx Aqush Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: refurbished (used), functionality: fully functional, Erjo 90 HSMU 802 – Fully refurbished and in like-new condition. Iedpfxozc Iuye Aqueth

Condition: reconditioned (used), functionality: fully functional, Bruks 803CS chipper in very good condition. Itsdpjzc It Aefx Aqujh

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Itodpfx Aqjd Dy S Rjueh Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Itodpfx Aqjyhzhuoush Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers Ijdoyhzhnspfx Aqueth

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT Iodpsv Tdq Iofx Aqusth All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable Iodoyhzhzjpfx Aqujth In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator -Operates on wood and gas -Sold with gas burner -With mechanical control -Voltage: 400V Itodsx Up Nwepfx Aquoh

Condition: good (used), mileage: 418,789 km, power: 338 kW (459.55 HP), first registration: 12/2017, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, color: orange, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Second diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed (coupler) - Halogen headlights - Manual adjustment - PTO (power take-off) - Radio/cassette - Sleeper cab - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x4, Empty weight: 7,964 kg, Gross weight: 20,500 kg, Total tank capacity: 740 litres, Second diesel tank, Fifth-wheel height: 118 cm, Fifth-wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Orange, Heated mirrors, Lighting: Halogen, Climate control, Seat heating, Beacon lights, Engine power: 338 kW (453 Hp), Fuel: Diesel, Emission class: Euro 6, Transmission type: AS-Tronic, Gearbox: TraXon, Gears: 12, Power steering, ABS, ASR, PTO (power take-off), Starter battery, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, 4x4 HYDRODRIVE / PTO + HYDRAULICS FOR TIPPER = More Information = Transmission Gearbox: TRA, 12 gears, Automatic Axle configuration Brakes: disc brakes Axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 6 mm; Tyre tread right: 3 mm; Suspension: leaf spring Axle 2: Tyre size: 315/80R22.5; Twin tyres; Tyre tread left inside: 5 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 7 mm; Tyre tread right outside: 10 mm; Suspension: air suspension Weights Curb weight: 7,964 kg Payload: 12,536 kg Gross vehicle weight: 20,500 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Ijdpoyt Dvbefx Aquoth Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Competitive prices • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates are quickly arranged • Expert technical services • The confidence of 'recognisable quality' • And more.... Please visit our website for special offers and complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 648,504 km, power: 368 kW (500.34 HP), first registration: 02/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2020, Equipment: cruise control, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking heater, spoiler, = Additional Options and Accessories = - Cabin - Tilting hydraulics - Sleeper cabin - Sun visor - Auxiliary heater - Power take-off (PTO) = Notes = Scania R500 Highline 6x2 - PTO/Hydraulic - Full air suspension - 3.15 wheelbase - Navigation - Refrigerator unit Year of manufacture: 2020-02-13 Mileage: 648504 km YS2R6X20002170755 PTO/Hydraulic Opticruise Full air suspension Wheelbase 315 Refrigerator unit Coffee machine = Further Information = Iodezcyppjpfx Aqusth Technical Information Number of cylinders: 6 Transmission Gearbox: Opti Cruise, Automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 2: Tire size: 385/55R2.5; Lift axle; Max. axle load: 7500 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 9,848 kg Payload: 17,152 kg GVW: 27,000 kg Condition Technical condition: good Optical condition: good

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Itjdpfx Aqobtnftoush Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Isdpfx Aqebunq Heueth Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Itsdjmhh Idspfx Aqueh Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: Itedpfx Aqeh Eiw Isuoh - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. Itjdpjh Hnp Dofx Aqueh manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model Itodpfx Asutmw Hequeh H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Iodpfx Aopdqzxjqusth Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), mileage: 820,793 km, power: 316 kW (429.64 HP), first registration: 04/2018, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,310 mm, total width: 2,500 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fridge, navigation system, onboard computer, parking heater, power assisted steering, power mirror, traction control, Technical information Number of cylinders: 6 Engine capacity: 10.677 cc Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Max. axle load: 8000 kg; Steering Rear axle: Double wheels; Max. axle load: 11500 kg Weights Empty weight: 7.351 kg Carrying capacity: 12.149 kg GVW: 19.500 kg Interior Number of seats: 2 Condition Technical condition: good Visual appearance: good Identification Registration number: 47-BKT-2 Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Adaptive Cruise Control - Air suspension - Air Suspension Seats - Air suspension system - Aluminium fuel tank - Cabin - Central lubrication Itjdpfxjyyxn To Aqush - Central lubrication system - Climate control - Closed cabin - Differential Lock - Front window - Heated Mirrors - Heavy duty engine brake - Lane Assist - Leaf spring suspension - Passenger seat - PTO - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Speed limiter - Spotlight front - Spotlight rear - Spotlights - Vehicle heater - Visor - Voice Control

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Iodeyzadrspfx Aquoth

Condition: excellent (used), Deburring machine, Itsdpfxsy Andce Aqueh 1 upper head, 3 kW motor 2 lower head, 3 kW motor 3 right head, 3 kW motor 4 left head, 3 kW motor 5 universal head, 0.37 kW motor 6 feed mechanism, 1.5 kW motor, 18 m/min Working height: 11 cm Working width: 14 cm

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm Iedpfxszbb H Ho Aqujth - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,55Kw, speed 0,3m/sec. Iodsff Hgbjpfx Aqujth * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side Iodjff Hf Dspfx Aqujth drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec Ijdpfjh Eld Ejx Aqueth * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54