Used Prodma Cb-80 for sale (17,914)

Condition: used, machine/vehicle number: 1001, WP-UC 80 stainless steel bowl on stanchions for the UC 80 AC mixer Fgjdpfx Alec Upuqeqsb Top condition

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Fjdpfx Aloy Hkhreqogb Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit

Condition: used, Year of construction: 1993, pressure 80 t throat 280 mm stroke 10 - 140 mm Stroke rate 85 / min Fjdpfeyx Ikusx Alqegb Distance table/ram, max. stroke up, adjustment up 380 mm Table surface area 850 x 560 mm Hole in the table 300 x 200 mm Table height above floor 790 - 950 mm Ram surface 420 x 210 mm Ram adjustment 60 mm Power capacity 4,0 kW Weight 4,5 t Dimensions (WxDxH) 1,3 x 1,4 x 2,45 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, foot operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m Fedpfx Ajxwdrvjlqsgb SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm Fgodpfov Svb Aox Alqjb daylight 1200 mm table surface area 1650 x 1250 mm die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m Fgedpevuua Njfx Alqjb with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Fgjdpfx Aevuua Aolqjb Hole in the table 280 / 315 mm Table height above floor 800 mm Passage to the back 500 mm Ram surface 650 x 400 mm Ram adjustment 70 mm Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1989, Pressure 080 t throat 300 mm stroke 8 - 140 mm no. of strokes 60 / 90 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 800 x 600 mm hole in the table 330 x 230 mm table adjustable 230 mm table height over floor 750 - 980 mm ram surface 600 x 240 mm ram adjustment 100 mm Fsdsvuuavjpfx Alqegb power capacity 4,5 / 6,9 kW Weight 5,5 t Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm Fgjdsvut Npopfx Alqsb hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW Fedpfevut E Rsx Alqsgb weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Condition: used, Year of construction: 2001, operating hours: 533 h, Type of fuel: Electric Colour: Grey Empty weight: 12.570 kg Dimensions (LxBxH): 385 x 200 x 330 cm Lifting capacity: 8.000 kg Lift height: 408 cm Fork dimensions: 2.400 x 2.430 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: T32207.0234 - Operating hours: 533 - Lifting capacity: 8000kg - Lifting height: 4080mm - Overhead clearance: 3300mm - Free lift: 0mm - Fork length: 2400mm - Maximum fork width: 2430mm - Minimum fork width: 530mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Heating, Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Midac - Capacity: 1440Ah - Battery voltage: 80V - Battery test result: 61% - Transport dimensions: 3850mm x 2000mm x 3300mm (l x w x h) Fedpfxsywuyao Alqjgb - Transport weight [kg]: 12570kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V • Frequency: 50 Hz Fedpfx Aljy Rpdtjqegb • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,150 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm Fgodpfsy Rawdox Alqjb · Hubhöhe 3500 mm · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,550 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm · Hubhöhe 3500 mm · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad Fgedpfx Asy Ravtslqob · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Fsdpfx Aer D N Eqslqogb working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 4,000 mm, workpiece weight (max.): 6,000 kg, The PORĘBA TPK-80/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available on stock, under power, ready for inspection Technical data: - distance between centers/turning length: 4000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 6000 mm width: 1800 mm height: 1800 mm Fgsdsy N R Iwopfx Alqob total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: good (used), Bar feeder, automatic bar loader for CNC lathe, brand Iemca, model Kid 80, year 2016. Fsdpfxoy N R Tte Alqegb

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Fodpfoy N D E Aox Alqsgb Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Fsdpfogvvn Eex Alqogb Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Fgsdodcd Dlepfx Alqjb Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Fsdpfxsy Nydze Alqogb Y1, Y2, and X axes CNC controlled CNC crowning Flat pressure table Year of manufacture: 1993

Condition: used, Year of construction: 1972, turning length 5.500 mm greates pass round over bed 800 mm swing diameter over face slide 500 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Fgodpsy Nn Egjfx Alqeb Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, Neugart PSFN140-010-SSSD3AH-Z38/80/180/215/B5/M12 planetary gearbox SN: 2185 including motor flange 1FK7103, unused in original packaging, 100% functional, delivery contents as per photos. Fjdjy Npg Eepfx Alqsgb

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307943 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201009, used, in good maintained condition, 100% functional, scope of delivery as per photos. Fgsdey Npdwepfx Alqsb

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307942 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201007, used, in good condition, 100% functional, scope of delivery as per photos. Fjdsy Npdqepfx Alqsgb