Used Monforts Tnc 300 for sale (13,278)

Condition: good (used), RENZ WP 300 Dispenser for RENZ RingWire wire comb elements The RENZ WP300 is designed for separating RENZ RingWire wire comb elements from the carrier cardboard (wire pack). Accessories: Connecting cable WP300 for the ECL binding machine Machine documentation Dimensions (L x W x H): 54 x 40 x 33 cm Weight: 30 kg Ledpfx Aezdymijiiorn

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 591.063.001, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, The machine is in excellent condition. Lrsdpfozgixtsx Aiion The machine can be loaded onto a truck without any restrictions.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 11,070 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear across the entire width Partial wheel arches on the 1st axle with anti-spray flaps, anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock. Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-bed trailers 1 pair of recessed ring tie-down points at the front on the drawbar, each 5 tons 7 pairs of recessed tie-down loops on the top and sides of the outer frame, each 10 tons 1 x at the front on the drawbar 6 x in the low-bed area First tie-down point 250 mm from the front and last tie-down point max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 5 pairs of recessed beam pockets in the outer frame, interior 70 x 40 mm (can be converted to 5-ton ring tie-down points, not included in the scope of delivery) 2 pairs of folding tie-down points in addition, each 10 tons 1 x on the drawbar (projects) 1 x behind the last axle, recessed in the floor Coupling device, trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels & Tires 235/75R17.5 according to manufacturer's choice with M&S marking Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Manufacturer: Wabco or Knorr Lrjdei Riwfopfx Aiion Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (light can be removed) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Drawbar at the front with steel/diamond plate surface Storage box in the ramp slope recessed into the drawbar followed by 70 mm softwood floor, steel/diamond plate surface in the wheel arch area Rear slope with 70 mm softwood floor Low-bed area including rear slope 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable additional ramp securing device, foldable at the bottom (to prevent lateral slippage of the ramps, not in conjunction with lateral hydraulic ramp adjustment) covered with wood with spring-loaded support Operating instructions With an axle load of 10,000 kg, a special permit is required; only indivisible loads are permitted!!! The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and fifth-wheel loads. Country of registration/plates Country of registration: Germany Type approval according to EC 2007/46 24/7 service hotline

Condition: excellent (used), functionality: fully functional, MITRE SAW model OMS SALVARANI FC 300 RAP with dust aspirator second hand machine working conditions : good CE regulation : Yes complete with extractor cabinet volt. 380/50 Lrodpfx Aezghdzsiijn blade diameter mm. 300

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Stork & Herrmann Model: MA 300D Year of manufacture: 2022, as new 2 x 300-liter containers with runners (for loading) 2 rotation directions (freely selectable left/right rotation of the container) Container mounted on plastic wheels, tiltable by approx. 25° Lsdpfxszgg U Es Aiiorn Machine stands on legs for easier cleaning underneath Drain screw in the container Complete stainless steel construction Mechanical adjustment of the mixing arm height Shipping possible

Condition: used, mileage: 74,000 km, power: 79 kW (107.41 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,964 mm, loading space length: 2,480 mm, loading space height: 1,380 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Ford Transit Custom 300 Trend, L1H1, with optimal equipment, ideal for businesses and tradespeople. From first owner. Workshop/shelving system by Würth (details below). Heated seats, adjustable on both sides Air conditioning with pollen filter 3 seats (double passenger seat) Comfortable driver's seat with fold-out armrest, multiple adjustment options: - Seat height, seat tilt, backrest, lumbar support Seat cover fabric High cargo area partition, lined, with window and pass-through Audio-navigation system 24/25 with Ford SYNC 3, 8'' color touchscreen - AppLink (Android Auto and Apple CarPlay) - Media: Radio (DAB+, FM), USB, Bluetooth - Bluetooth hands-free system - Voice control Multi-function leather steering wheel Driver assistance systems: - PDC parking pilot system front and rear, visual and audible display - Cruise control - Hill start assist - ABS, ASR, ESP - EDS electronic front differential lock Comfort: - Electric windows - Electrically adjustable and heated exterior mirrors - Central locking with remote control Multi-function display / on-board computer Driver and passenger airbags Spare wheel with road tires Fog lights with cornering lights Daytime running lights LED Trend version Model update Ledpfxszggc As Aiijrn Style color package - Front bumper, rear side panels and exterior mirrors painted in vehicle color Color FROZEN WHITE 6-speed manual transmission Wheelbase 2933 mm Rear tailgate with glazing, heated, windshield wipers, opening angle 180 degrees Sliding door, cargo area, right Registered as an NCV (commercial vehicle) van Steering wheel adjustable Cargo area equipment: Workshop installation by Würth (similar to Aluca, Bott, Sortimo). Shelving system on both sides with shelf compartments, storage compartments, drawers (6x), holders for tool/small parts cases (4x - cases not included). Extendable workbench. Cargo area partition, lined in the cab (noise-insulated), with window. Robust, plastic-coated wooden floor. Load securing through eyelets and fastening rails. Walls lined with plastic panels. Lighting. Ventilation and air conditioning. Cargo area dimensions (approximate): - Length: - Bottom: 248 cm, with pass-through: 310 cm - Middle: 237 cm - Top: 232 cm - Height: 138 cm (under cross member) Tires: All-season tires 215/65 R 15 on steel rims with wheel covers, approximately 4 mm tread depth in the front and approximately 6 mm in the rear Service history: 03.2024 / 52,766 km Inspection (annual check) 09.2025 / 69,220 km Inspection + engine oil change + brake fluid + air filter + odor filter Next service due at 109,000 km or 09.2027 Data transmission errors may occur in the vehicle description, including images. Errors and prior sale are reserved.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2013, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,910 mm, color: white, Year of construction: 2013, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Valx Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 9.980 kg Carrying capacity: 32.020 kg GVW: 42.000 kg Functional Tail lift: Dhollandia DHSM.30, slider lift, 2500 kg Make of bodywork: Heiwo Thermo King SLXe 300 Whisper Pro Cooling engine: diesel and electric (14894 operating hours diesel; 7729 electric) Wall thickness: 50 mm Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 06/2027 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Lrjdpfx Ajy Hcvnjiisn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 15,600 kg, maximum load weight: 8,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Chassis Steel welded construction 1 pair of wheel recesses embedded in the steel platform in the wheel arch area, angled for access, length at the bottom approx. 1400 mm, approx. 400 mm deep. Frame in the main beam area is 400 mm higher than the wheel recess. If machines are to be transported where the overall height needs to be checked, please provide the technical data sheet of the machine types with precise details (if the overall height is exceeded -> customer's risk, approval required). Depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with robust ball bearing race, storage box embedded in the turntable extension. Lredpfx Aisi Ri Ryeijn Foldable rear support. 2 chock blocks with holder. Aluminum side impact protection. Splash guards at the rear, covering the entire width. Extendable widening elements to 3,000 mm (not in the rear slope). (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm.) Storage compartment for wooden planks in the center of the loading area. Wooden planks 70 mm for widening to 3000 mm. Tie-down eyes, low loader 110 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front. Includes 6 pairs of tie-down rings embedded on top and on the side in the outer frame, each with 10 tons capacity. 1 x in the neck area. The remaining ones are distributed in between, with a distance of no more than 1200 mm. 1 x rear slope. 5 pairs of pocket slots embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 tons ring tie-down eyes, not included in the scope of delivery). Coupling device, trailer turntable. Drawbar with tested 40 mm drawbar eye. Axles + Suspension SAF drum brake axles. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearing. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle. ABS and ALB, with ABS plug at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Wheels & Tires 235/75R17.5, according to manufacturer's choice. Steel rims in twin configuration, factory silver. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red side marker lights at the rear. 2 x 7-pole fail-safe plugs at the front, with connection cable. 1 LED rotating beacon with holder, switched via the sidelights (beacon can be removed). 2 pairs of warning panels, double LED-illuminated and extendable to 3,000 mm. Floor Front area, steel floor, included. Thereafter with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering. Rear slope with 70 mm soft wood floor. Low loader platform including rear slope 8,200 mm. Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable. Covered with wood. With spring-assisted support. Operating instructions At 10,000 kg axle load, an exception permit is required, only indivisible load is possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while observing the permissible axle/support and saddle loads. Country of registration/sign

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Lodpfxsi Ri Rvo Aiijrn Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 wheel chocks + holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle 1 pair of wheel recesses embedded in the low-bed area in front of the 1st axle, angled for entry, approximately 1600 mm long at the bottom, approximately 400 mm deep. Note: Frame in the main beam area is 400 mm higher than the wheel recess. 2 pairs of wheel recesses embedded in the low-bed area between the axles, angled for entry, approximately 600 mm long at the bottom, approximately 300 mm deep. Note: Frame in the main beam area is 300 mm higher than the wheel recess. Extensible widening to 3,000 mm (not in the rear slope) Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-bed trailer 1 pair of tie-down cutouts embedded in the longitudinal beam at the front in front of the 1st axle, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons. 7 pairs of tie-down eyes embedded on the top and side in the outer frame, each 10 tons. 1 x at the front in front of the 1st axle 6 x in the low-bed First tie-down eye 250 mm from the front and last max. 250 mm from the rear, distance between tie-down eyes not greater than 1100 mm Coupling device, trailer turntable Tow hitch with tested 40 mm tow ball Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235/75R17.5, according to manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extensible to 3,000 mm Floor Front slope with steel/diamond plate covering Storage box embedded in the drive-over slope to the front slope, then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-bed platform including rear slope 6500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood With spring-assisted support Operating instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) Registration country/Signs Registration country: Germany With DEKRA acceptance and certi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, total length: 11,990 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. More information Chassis Steel welded construction Turntable with heavy-duty ball bearing, storage box recessed in the turntable extension Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Extendable widening sections to 3,000 mm (not in the rear slope) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes for low-bed trailers 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front 6 pairs of tie-down recesses on the top and sides of the outer frame, each with 10 tons capacity 1 x near the gooseneck area the rest distributed in between, with a distance of no more than 1200 mm 1 x rear slope 5 pairs of lashing pockets recessed in the outer frame, 70 x 40 mm inside, (convertible to 5-ton ring tie-down eyes, not included in the scope of supply) Coupling device for trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical Axle load equalization (rocker equalization) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake including 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable, Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17.5 at the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connection cable, 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Front area with steel floor, then with 70 mm softwood floor, in the wheel arch area steel / tread plate covering Rear slope with 70 mm softwood floor Low-bed platform including rear slope 8,200 mm Ramps Steel ramps 2800 mm long, 750 mm wide, laterally movable covered with wood including with spring-loaded support Ledsi Riy Eopfx Aiiorn Operating instructions An exemption permit is required for a 10,000 kg axle load; only indivisible loads are possible!!! The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of registration / signs Country of registration: Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Drawbar galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Note: Archive images! Customized transport solution Configure your Flieg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 16,100 kg, overall weight: 24,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 11,625 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 jacking plates with holder Splash guards at the rear over the entire width Preparation for widening to 3,000 mm (holes in the outer frame and not in the rear slope) Tie-down eyes, low loader 1 pair of tie-down recesses embedded in the front longitudinal member on the extension, 10 tons each 7 pairs of tie-down studs embedded in the top and sides of the outer frame, 10 tons each 1 x at the front on the extension 5 x in the low bed 1 x in the rear slope 12 pairs of tie-down holes in the outer frame, 5 tons each (for securing tie-down straps) 5 x on the extension, 6 x in the low bed and 1 x in the rear slope Coupling device, trailer turntable Tow hitch with tested 40 mm drawbar eye Axles + Suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (lever equalization) Wheels and tires 235 / 75 R 17.5 Fulda Steel rims in twin arrangement, factory silver Braking system 2-circuit compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Connecting lines extended by approx. 60 cm Without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical system 12 Volt, multi-chamber lights, without yellow LED lighting on the sides, side reflectors 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connecting cable, extended by approx. 60 cm 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of illuminated and extendable warning signs to 3,000 mm Floor Front extension with steel/non-slip sheet covering Storage box embedded in the ramp to the extension Followed by 70 mm soft wood floor, steel/non-slip sheet covering in the wheel arch area Rear slope with 70 mm soft wood floor Low loader bed incl. rear slope 5900 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood Lodpfxsi Ri Ago Aiiern With spring-loaded support Operating instructions With 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the cargo, the total weight may not be achieved while complying with the permissible axle/support and drawbar loads. (Poor driving and handling behavior possible due to incorrect load distribution) Registration country / signs Registration country: Germany With Dekra approval and report, for max. 60 km/h approval, towing vehicle LoF (registration country Switzerland max. 40 km/h possible) Prepared for license plate holder, two lines Without contour marking / reflective strips according to ECE R 048 Painting Frame DB 7350 Novagrau 10 years warranty against rust perforation Tow hitch galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Note: Archive images!

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 300 kW (407.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,700 kg, input voltage: 400 V, total width: 2,360 mm, total length: 2,700 mm, total height: 2,450 mm, warranty duration: 6 months, AIRCOOLED CHILLER CLIMAVENETA FOCS SL BT 1702 300 KW Cooling capacity: 300.0 kW / 85.3 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer CSH7583-80CVY-40p (screw) Type of refrigerant: R134a Number of fans: 4 pcs. Dimensions: 2.7x2.36x2.45 m Weight: 3700 kg Working hours: 29474/19896 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Lrjdpfx Aiszgcftoion Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Item: A-1426-Cheese Salting Racks Cheese Salting (Brine) Racks, Ljdpfxsitk Dis Aiiorn Stainless Steel AISI 316, with automatically closing sides. Dimension: 1880 X 350 X 2100

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 06/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Ljdpfx Ajzdrb Seiisrn Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets

Condition: excellent (used), Here, we offer a Heraeus heating and circulating air drying cabinet. Heraeus heating and circulating air drying cabinet up to 300 °C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 300°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 6.8A, Rated power 1.50kW Lodpfx Aszdr Dyjiijrn Includes 2 inserts Type: UT 66060 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Manufacturer: Ikegai - Japan Type: TNC 75 Year of manufacture: 1990 Control system: Fanuc 15-T Technical data: Lsdpfezdrm Ijx Aiiern - Center height above bed: 750 mm - Center height above floor level: 1380 mm - Swing diameter above bed: 1500 mm - Swing diameter above tool slide: 1200 mm - Max. distance between centers: 7000 mm - Bed (width x height): 1500 x 630 mm - Bed, full length: 10,200 mm - Spindle nose: JIS A2 No. 20 - Taper bore of the spindle: Ø 100, taper 1:10 - Diameter of front spindle bearing: 280 mm - Diameter of rear spindle bearing: 240 mm - Speed: 2.5 - 250 min⁻¹, infinitely variable, 2 ranges (H: 10 - 250, L: 2.5 - 60 min⁻¹) - Rapid traverse X-axis: 2000 mm/min - Rapid traverse Z-axis: 4000 mm/min - Rapid traverse tailstock: 2000 mm/min - Travel X-axis: 560 mm - Travel Z-axis: Distance between centers + 200 mm - Tailstock: integrated, rotating center with its own drive and radial force measuring device - Tailstock quill diameter: 260 mm - Taper bore tailstock: MK No. 7 - Tailstock quill travel: 350 mm Condition: Good, functional condition.

Condition: used, overall weight: 29 kg, jaw width: 150 mm, clamping range: 300 mm, Clamp length 300 mm Jaw width 150 mm Weight 29 kg Lredpfxozdq I De Aiion If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, mileage: 254,000 km, power: 110 kW (149.56 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,925 mm, total height: 2,940 mm, loading space length: 3,195 mm, loading space width: 1,895 mm, loading space height: 1,935 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * NET PRICE * Deep-freeze box with right side door & rear portal doors * Thermo King V-300 Max (diesel + electric cooling) * 2 x evaporators – 2 compartments & folding partition * LxWxH: 3.20 x 1.90 x 1.93 m * 6-speed manual gearbox * 3 seats * Audio system * Air conditioning WhatsApp: Errors and interim sale excepted! Sale is made without any warranty! - We speak Russian - We speak English - We speak Polish - We speak Serbian/Croatian - We speak Spanish Lrjdjx A Ni Ropfx Aiijn

Condition: used, Year of construction: 2016, functionality: fully functional, CERION C VERTICA 180-300 – Year 2016 Vertical Laser Engraving Machine for Flat Glass Maximum Glass Size: 1800 x 3000 mm Thickness: 50 mm Processing Area: Laser A Surface: 1720 x 2700 x 50 mm Laser B Surface: 1720 x 2700 x 50 mm Ljdpfx Aiezc Rp Tjisrn

Condition: used, mileage: 78,000 km, power: 79 kW (107.41 HP), first registration: 03/2021, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,339 mm, total width: 2,032 mm, total height: 1,958 mm, loading space length: 2,840 mm, loading space height: 1,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Ford Transit Custom 300 L2H1 long, with optimal equipment, for businesses and tradespeople. Sortimo shelving system in the cargo area (details below). Trailer hitch with 2650 kg towing capacity Roof rack, foldable (retractable) Heated windshield Air conditioning with pollen filter Auxiliary heater, electric 3 seats (double passenger seat) Comfortable driver's seat with fold-out armrest, multiple adjustment options: - Seat height, seat tilt, backrest, lumbar support Seat upholstery, fabric High cargo area bulkhead, paneled, with pass-through flap Audio-navigation system 24/25 with Ford SYNC 3, color touchscreen 8'' Lrodezf In Djpfx Aiion - AppLink (Android Auto and Apple CarPlay) - Media: Radio (DAB+ FM), USB (2x), Bluetooth - Bluetooth hands-free phone system - Voice control Multi-function leather steering wheel (condition like new) Driver assistance systems: - PDC parking pilot system front and rear, optical and acoustic display - BLIS (Blind Spot Warning) - Rear cross traffic alert - Pre-Collision Assist, active with braking function - Cruise control, adaptive with braking function - ACC Adaptive Cruise Control (distance control) - Lane keeping assist - Fatigue warning - Crosswind assist - Hill start assist - ECO Trainer / ECO Coach - Trailer stabilization program - Brake assist / emergency braking assistant - Automatic windshield wipers (rain sensor) - Automatic headlights (light sensor) - Automatic high beam - ABS, ASR, ESP - EDS Electronic differential lock front Comfort: - Electric windows - Exterior mirrors, electrically adjustable, heated and foldable - Central locking with remote control Multi-function display / on-board computer Driver and passenger airbags Spare wheel with road tires and jack Fog lights with cornering lights LED daytime running lights LED cargo area light (4x) Trend trim level Model update Style color package - Front bumper, rear side panels and exterior mirrors painted in vehicle color Rear wing doors without windows, opening angle 180 degrees Sliding door, right Wheelbase 3300 mm (L2, long) Generator 240 A Engine 2.0 L - 79 kW TDCi CAT 6-speed manual transmission Registered as a commercial vehicle van Cargo area equipment: Shelving installation by Sortimo (similar to Aluca, Bott, Würth). Left side shelving with storage compartment, shelving compartments, small parts containers, 3x tool/small parts cases (plastic), holder for 5 additional cases. Right side shelving with storage compartment, shelving compartment, 4x drawers. Fold-out workbench. Cargo area bulkhead without windows, with pass-through flap. Robust wooden floor. Load securing by means of eyelets and fastening rails. Side walls partially paneled with hardboard. Ceiling paneled. LED lighting. 12V socket. Ventilation and air intake. Cargo area dimensions in cm (approximate): - Length: - bottom 284, with pass-through 347 - middle 273 - top 268 - Height: 137 (under cross member) Tires mounted: Winter tires 215/65 R 15 on steel rims, approx. 6 mm tread depth front and approx. 6 mm rear Additional tires: Summer tires 215/65 R 15 on steel rims, approx. 7 / 7 / 8 / 8 mm tread depth Service history - according to Ford, digital service records: 06.2022 / 10,153 km: Inspection + oil service (oil quality check) 03.2023 / 23,628 km: Inspection with oil change + replacement of pollen filter 02.2025 / 57,748 km: Inspection + oil service (oil quality check) + front brake discs and pads renewed Despite careful processing, input and data transmission errors may occur in the vehi

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm Lrjdpozf Hkdefx Aiion - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Coordinate measuring machine with video-based system Ogp Smartscope MVP 300 Year of manufacture: 2012 In very good condition. Ledpfx Aijzfyzcjisrn Technical data: Travel ranges: X: 300 mm Y: 300 mm Z: 150 mm Scale resolution: 0.5µ Dimensions (depth x width x height): 815 x 710 x 800 mm Weight: 140 kg Further technical data can be found in the photos. The measuring device can be inspected while powered on and in its operating environment.

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Ledezdi Ivepfx Aiisrn Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1980, hobbing length 1750 mm milling width 260 mm max. module 10 min. module 12 total power requirement 8 kW weight of the machine ca. 4500 kg dimensions of the machine ca. m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Lsdpst Hxagjfx Aiiern Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 – 179 rpm Milling slide swivelling right / left 30 ° Feeds, infinitely variable (milling slide) 0 – 600 mm/min Quick return 2,000 mm/min Milling spindle drive approx. 4 kW Total electrical load 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special Features: * Automatic milling cycle control via cam bloc mounted on milling slide and table slide with possibility of jump switching (= automatic by-pass of an area which should not be milled) and pendulum milling operation (= synchronized milling on the first half of table, and workpiece change on the second half. * hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width 140 mm, clamping height inside the device 60 mm, with own hydraulic aggregate, hand switch, * Manual fine adjustment of table (0.001 mm) for exact positioning in a pre-milled rackgear. * Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories. * Central lubrication. * Built-in hydraulic unit. * Simple Coolant device. Separate switch cabinet, various rack cutter up to 160 dia. This machine is especially suitable for milling racks, and also for manufacturing broaching tools (relief milling is possible by swivelling the cutter head). Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), mileage: 222,441 km, power: 221 kW (300.48 HP), first registration: 12/1995, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,500 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1995, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles Ledpfszfywdjx Aiiorn - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good