Used Minipack-Torre Modular 70 for sale (13,363)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Bedjk Abf Uopfx Adrjdd The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Bdedpfx Aok Ablpodrod For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), mileage: 179,560 km, power: 382 kW (519.37 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 750 l, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 6,510 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, spoiler, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum fuel tank - Automatic headlights - Brake booster - Sunroof - Roof spoiler - Differential lock - Euro 6 - Remote central locking - Adjustable steering wheel - Air conditioning - LED daytime running lights - Leather steering wheel - Air suspension - Front center armrest - Rain sensor - Sleeper cab - Sun visor - Stability control - Auxiliary heater = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: OPTIDRIVER, 12 gears, automatic Axle Configuration Front axle: Max. axle load: 8000 kg; steered Rear axle 1: Lift axle; Max. axle load: 7500 kg; steered Rear axle 2: Dual tires; Differential lock; Max. axle load: 11500 kg Weights Unladen weight: 8,748 kg Payload: 18,252 kg GVW: 27,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: good Optical condition: good Bjdpfx Adszghhajrodd Identification License plate: 38-BRD-1

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, rotational speed (max.): 12,000 rpm, Technical specifications – Elumatec AS 70/44 1-spindle copy milling machine for aluminum and PVC profiles Feature Value Machine type 1-spindle copy milling machine Milling range with stop 230 × 90 mm Milling range with copy template 230 × 90 mm Clamping range for profiles 180 × 130 mm Milling stroke 110 mm Mains connection 230/400 V, 3 ~, 50 Hz Motor power 0.74 kW Spindle speed 12,000 rpm Operating pressure 7 bar Air consumption 12 l/cycle without spray device, 24 l/cycle with spray device Dimensions (L × W × H) 720 × 650 × 1,440 mm Weight approx. 120 kg Equipment Versatile for processing aluminum and PVC profiles. Copy milling in a 1:1 ratio using templates or stops. Pneumatic material clamping. Manual feeler pin with three levels for different cutter diameters. Pulse spray device for tool cooling. Simple operation via two control levers. Bdedpfxozgglks Adrsd Quick setup and high machining accuracy.

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h weight 2030 kg ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition Interface for robot systems in accordance with EUROMAP 67 available A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Bsdpoywzv Iofx Adrodd Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled Bdjdpfx Ajfkz Rbjdred - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: good (used), functionality: fully functional, mileage: 278,321 km, power: 150 kW (203.94 HP), first registration: 10/2016, fuel type: diesel, maximum load weight: 2,730 kg, overall weight: 7,000 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 2,050 mm, Year of construction: 2016, number of previous owners: 2, Equipment: ABS, air conditioning, airbag, central locking, sliding door, soot filter, tail-lift, truck registration, Iveco 70 C 21 box with tail lift, 750 kg, automatic transmission, air conditioning, rear view camera, right-hand sliding door, electric windows and mirrors, heated, 2 seats, driver airbag, outside temperature display, box 5.60 m long, 2.30 m high, 7 t total weight, 2.73 t payload, sale only to trade and export, errors, changes and prior sale reserved Bdsdpstuk A Asfx Adrod

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt Bodpfx Aozdd Avedredd • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, mileage: 98,000 km, power: 125 kW (169.95 HP), first registration: 11/2015, fuel type: diesel, empty load weight: 3,800 kg, maximum load weight: 3,200 kg, overall weight: 7,000 kg, tire size: 225/75 R 16, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 3,100 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, cabin, parking heater, trailer coupling, Vehicle location: en route / in transit, steel body, Doka, rear window, electric window left, electric window right, auxiliary heater, 6-speed gearbox, ABS (anti-lock braking system), rotating beacon, leaf spring suspension, trailer coupling with ball head, green environmental badge. Wheelbase: 3750 mm, body: DOKA with Sortimo shelving system, steel side panels that can be folded down, data subject to change, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Bodpjzf N Acjfx Adrsdd

Condition: used, power: 14 kW (19.03 HP), first registration: 01/2005, fuel type: diesel, overall weight: 710 kg, color: yellow, gearing type: mechanical, suspension: other, Compressor plate, year of manufacture 2005, 14 kW Lambordini engine, fully functional. Weight: 710 kg. FOR US, THE CONDITION AND OUR OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller at the following number. //*WE OFFER TRADE-IN, ACCEPT PARTIAL PAYMENT, OR PROVIDE FINANCING FOR YOUR VEHICLE! All information is provided without warranty.* You can find more offers on our website: [website address]. The description and data provided do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Bdsdpfx Adezf Iqferjd

Condition: used, Year of construction: 2007, fuel type: gas, Please contact Gebrauchtgeräte Center for more information Bedjzf Atzjpfx Adrsdd

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 33, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x Iveco Daily new vehicles with COC, available immediately with GSR systems We are the official representative of Ferqui in Germany. Ferqui is renowned for its high-quality fiberglass bodywork. Since the late 1960s, Ferqui has been manufacturing with fiberglass, making it one of the pioneers in this sector. The vehicles have a permissible gross weight of 7,200 kg and therefore include Iveco warranty. Iveco C70 chassis with automatic transmission and 210 HP Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, luxury driver's seat with seat heating Bdsdpfjzfxpxsx Adred - Iveco Daily - 1 x coach / 1 x school/intercity bus on Iveco C70 chassis - Air-suspended rear axle - Telma - Length: 8.59 meters, Width: 2.50 meters (school bus 2.40 meters), Height: 3.1 meters - Body made of fiberglass - Skeleton structure made from galvanized steel - Front air conditioning - Webasto passenger compartment A/C RT 190 = 19 kW (dual A/C system) - Double glazing for coach / single glazing for school bus - Panoramic windscreen - Front electric door with lowered entry - Front entry height, without kneeling, max 300 mm - Rear emergency door - Total capacity: 33 persons for coach, 29 (28+1+1) for school bus - USB sockets at every row for the coach - Overhead luggage racks left and right for the coach - Fresh air nozzles at every seat row - Convector heating - Iveco auxiliary water heater with timer Coach version: 4.2 m³ luggage compartment - Rear luggage compartment - Spare wheel compartment cover - 2 side luggage compartments - Exterior color white Price: €159,990.00 for the school bus in the above configuration Coach: €169,990.00 Net export possible.

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Bedpfszc Nm Djx Adrjdd Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface 2x air valves 1x hydraulic core pull Hot runner control Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Screw diameter change possible Bjdpfjzc Nhhex Adrodd Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Bdsdpfx Ajzc Ng Rsdrjd Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Bodpfozc D Atsx Adrjdd Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We are offering this very well-maintained FESTOOL table saw, model PRECISIO CS 70 EB, manufactured in 2016. Bdjdpfszfv S Dex Adrsd It has been used very rarely, approximately 20 operating hours. Manufacturer: Festool Model: CS 70 EB Year of manufacture: 2016 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 252 mm Bdjdpszczvqsfx Adrjd Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Stable base body, ground on all sides - Can be mounted horizontally, vertically, or laterally - Guide rail with 19 mm guide groove - Additionally, 1 set of prism jaws Dimensions L x W x H 480 x 150 x 107 mm Weight 32 kg Good condition

Condition: used, Year of construction: 2018, operating hours: 24,849 h, lifting height: 4,610 mm, free lift: 1,560 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,100 mm, total height: 2,200 mm, total length: 3,700 mm, total width: 1,180 mm, color: grey, Lifting capacity: 3.000 kg - Year: 2018 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 517387J00054 - Operating hours: 24849 - Lifting capacity: 3000kg - Lifting height: 4610mm - Overhead clearance: 2180mm - Free lift: 1560mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Full cabin, Free-lift - Mast: Triplex - Inspection valid until: 12-2026 - Drive: LPG - Motor brand: Izusu - Transport dimensions: 3705mm x 1180mm x 2200mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bodpfx Ajywt N Hedrjdd Tess van den Boom

Condition: new, sheet thickness: 1.8upper roll diameter: 70messurements (LxWxH): 1650 x 700 x 1160prebending: 1.5motor: 1,1sheet length: 1050 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation Bdjdpfed Ab T Rox Adred We have many references!

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Bdjdpewrkcyofx Adrsd Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch

Condition: used, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, power: 0.75 kW (1.02 HP), Equipment: type plate available, Plastic Modular Belts / Belt Conveyor Bdedpfszfkm Aex Adrod Condition: Used Year of manufacture: 2016/2017 Total length: approx. 6,500 mm Total width incl. motor/feet: approx. 1,950 mm Total width without motor: approx. 1,320 mm Conveyor width: approx. 1,190 mm Conveying height (adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Colour: Light grey/Dark grey Includes SEW motor (0.75 kW) with Movimot (variable speed control) Includes feet (height-adjustable) Stock quantity: 7 units Price per unit Internal item number: 2026021103 The conveyor system was operational up until dismantling. Due to the excellent craftsmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We are happy to provide a customised offer or assist you with design and installation matters. Simply tell us about your requirements and site conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have successfully completed projects for companies in a variety of industries, such as logistics, pharmaceuticals, crafts, and electronics. Together, we will develop solutions to efficiently and sustainably optimise your processes and material flow. We can even offer fully automated sorting systems or additional components such as order picking racks or containers. Features: Condition: Fully operational, with signs of use Ideal for rapid material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg Bdsdpfx Adjxrlgwersd 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components Bdsdpow Iqdzsfx Adrod - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. Bdedpfx Aezcphbedrod The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: System for preventing cylinder rod torsion Support plates Pair of V-shaped prisms