Used Minimatic 100 for sale (23,807)

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Weight: 14 700 kg Condition: Used, heavy-duty industrial design Iiedpfx Aszk Amrsa Eod Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Permanent magnetic conveyor belt separator, including frame, Iiodpfezma Ewex Aa Eed belt speed: approx. 1.7 m/s, drive power: 4 kW (complete geared motor, brand new), overall length: approx. 2650 mm, width: 1500 mm, height: 700 mm, belt width: 1000 mm, ideal installation distance: 200-250 mm (max. 300 mm), weight without frame: approx. 3000 kg.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger Iodpfx Aaszmapvs Ejid - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: used, mileage: 101,692 km, power: 228 kW (309.99 HP), first registration: 12/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, crane, = Additional options and accessories = Ijdpfxezmam Us Aa Esid - Tipping hydraulics = Remarks = Crane Rotator: ✓ Clamshell bucket: ✓ = More information = Front axle: Steering Rear axle: Double wheels Crane: TLC 105.2, behind the cab

Year of construction: 1989, condition: ready for operation (used), A Bucher pneumatic horizontal membrane tank press for the food industry is available. Nominal volume: 100hl, max. throughput capacity (grapes): 6000kg/batch, machine dimensions X/Y/Z: approx. 6300mm/2200mm/2250mm, weight: approx. 5000kg. Including central filling and drip tray. An on-site inspection is possible. Iijdjzl U Nhjpfx Aa Esd

Condition: ready for operation (used), Year of construction: 2007, Two identical, mobile, electrically heated and thermally insulated stainless steel preparation vessels Scharf are available. Nominal volume: 100l, max. filling material density: 1kg/dm³, max. operating temperature: 80°C, diameter: 500mm, machine dimensions X/Y/Z: approx. 1000mm/700mm/1050mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Isdpfjzl U Ikex Aa Eeid

Year of construction: 1987, condition: used, x-travel 2800 mm y-travel 800 mm z-travel 1300 mm Iedpfet Hw I Nox Aa Eoid weight of the machine ca. 3 t

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and Ijdpfx Aaeu Su Apo Ejid stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Iisdpfx Aot Hxa Hea Eod Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, mileage: 376,187 km, power: 265 kW (360.30 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 20,500 kg, maximum load weight: 11,500 kg, tire size: 315/80R22,5, axle configuration: 8x4, number of seats: 2, first registration: 09/2008, emission class: euro4, suspension: steel, driver cabin: day cab, Equipment: ABS, cabin, Vehicle location: en route / in transit, delivery address Haus, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, ABS (anti-lock braking system), rotating beacon, leaf spring suspension, 2-point hydraulic support, green environmental badge. Superstructure: Schwing-Stetter FBP 20-100, drum AM7FHC+L. Total operating hours (read): approx. 21,508, auxiliary drive: approx. 10,483 operating hours, concrete pump: approx. 3,321 operating hours, mast: approx. 4,260 operating hours. Iijdszl Tgrepfx Aa Eod All information provided without guarantee, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Year of construction: 2022, TITTAL Filter fan SK3323 100 Ijdpjzl S Saofx Aa Esid Year of manufacture approx. 2019

Condition: excellent (used), For sale: ABB dry-type transformer. Type: DTE 100 / 1.1 3-phase dry-type transformer, 50 Hz Year: 2003 Power: 100 kVA Connection: Dyn5 Ijdpfx Asx Tzcyea Esid Voltage drop: 5.82% Weight: 745 kg Voltage: 400 V Condition: very good

Condition: used, maximum load weight: 22,270 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 02/2016, Year of construction: 2016, Equipment: ABS, * Schmitz SCB S2 refrigerated semi-trailer * First registration: 02-2016 * Thermo King SLXc 100 * Operating hours: 3,395 h * Diesel and mains operation * Partition * Tail lift, 2,000 kg * Steerable axle * Payload: 9,730 kg * Total weight: 22,270 kg * Gross vehicle weight: 32,000 kg * More pictures and videos available via Whatsapp * Information subject to change and errors excepted. Iisdpfx Aajzl N Rmj Ejd

Condition: used, mileage: 179,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2014, emission class: euro5, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Benz Sprinter 316 2x Air Conditioning Manual Transmission First Registered: 2014 Mileage: 179,000 15 Seats 100% Service History / Maintenance Record Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/????/????... Roman We will gladly assist you with financing or leasing. EU Sale: Net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options Iiodozl I Evjpfx Aa Eed - Transfer to Munich Airport or Passau train station

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, machine/vehicle number: 170609, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 460 mm, displacement volume: 59 cm³, injection pressure: 2,000 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, plate width: 600 mm, plate height: 650 mm, overall weight: 3,900 kg, Equipment: documentation/manual, ENGEL e-max 100 all-electric injection molding machine including GKU linear robot – Cleanroom system – Pharma – Top condition For sale is an ENGEL e-max 100 (Type E-MAX 200/100) in excellent technical and optical condition. The machine comes from the cleanroom production of a well-known pharmaceutical company in Lower Saxony and was used exclusively under the highest quality standards and regularly maintained. The entire system is in exceptionally well-maintained condition. The scope of supply includes a GKU linear robot including a separate robot base, which means the system can be used immediately for automated production processes. Technical data machine Manufacturer: ENGEL Type: E-MAX 200/100 Clamping force: 1000 kN (100 t) Opening stroke: 350 mm Tie bar spacing: 460 × 410 mm Platen size: 650 × 600 mm Tool height: 150–450 mm Max. tool weight: 650 kg Ejector stroke: 100 mm Ejector force: 25 kN Drying cycle: 1.45 s Injection unit IS 200 Screw diameter: 25 mm L/D ratio: 25 Max. injection pressure: 2,400 bar Max. injection volume: 58.9 cm³ Shot weight (PS): approx. 54 g Injection speed: 108 cm³/s Metering rate: 10 g/s Heating capacity: 6.95 kW Heating zones: 4 Equipment ✔ All-electric ENGEL e-max ✔ GKU linear robot ✔ Separate robot base ✔ Cleanroom machine ✔ Used in the pharmaceutical industry ✔ Regularly maintained ✔ Very well-maintained overall condition ✔ Ready for immediate use Advantages The ENGEL e-max impresses with its high precision, energy efficiency, and dynamism. It is ideally suited for the production of high-quality plastic parts, especially in the areas of: Medical technology Pharmaceuticals Packaging Electronics Precision engineering Technical plastic parts Isdpezl Iymjfx Aa Eeid Thanks to its origin in a cleanroom production environment, the machine was operated under particularly clean and controlled conditions. Inspection An inspection while the machine is running is possible at any time by appointment. We will gladly send you further pictures, videos, and technical documents upon request. More information on our homepage Maschinen-Handel.eu – Your specialist for used injection molding machines We will support you from the inspection to the transport and commissioning. If desired, we will organize dismantling, loading, Europe-wide transport, and export processing. e-max 100 t Cleanroom | Pharma | All-electric | Top condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, Please provide us with your offer price. A total of 6 Emag machines are available (same type). Sales are only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Iedpfeyh Sc Nex Aa Eeid Technical data can be found in the attached handout. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Year of construction: 1997, condition: used, machine/vehicle number: 97002/2/97, Grinding thickness max. 100 mm Grinding length 3,250 mm 6 face grinding spindles 2 top chamfers Iiedpfxozl Hp Hj Aa Eod 2 bottom chamfers Water channel support Profile milling support Automatic tool changer for different grinding operations Stop for chamfers, for use with diamond tools on the 1st chamfer Machine was overhauled by Rohr GmbH around 2020

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Iodoy Ihbxspfx Aa Eoid Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: new, Year of construction: 2016, functionality: fully functional, Compact Fanuc ArcMate 100/7L cell with R30iB control, Lorch S3 pulse welding machine, new. Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 1633 mm Year of manufacture: 2016 Table area: 750x500 mm each Overall dimensions: approx. 2500x1500x2200 mm Total weight: approx. 2000 kg Used item – normal signs of wear and tear. Further details, article numbers and pictures available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Iiodozlyt Eopfx Aa Eed Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify the delivery address.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 06122195, Year of construction: 2006, operating hours: 933 h, load capacity: 10,000 kg, lifting height: 3,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: ISUZU - 6 valjni dizelski, gearing type: other, fork length: 2,400 mm, fork width: 175 mm, fork thickness: 95 mm, turning radius (outer): 4,000 mm, empty load weight: 12,500 kg, total height: 2,820 mm, total length: 6,720 mm, Equipment: cabin, lighting, pallet forks, sideshift, Key specifications: Iijdezlydwopfx Aa Eod - Load capacity: 10,000 kg - ISUZU diesel engine - Automatic powershift transmission - Power steering - Heavy-duty industrial design - Suitable for use in manufacturing, warehouses, quarries, sawmills, and construction sites Due to its powerful engine and robust construction, this forklift is ideal for daily operation with heavy loads. Extended forks with dimensions 2400 x 175 x 95 mm – installed on the forklift Standard forks with dimensions: 2000 x 160 x 85 mm – included in the price and provided with the forklift

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Iodpfx Aajzlxyds Eeid Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Iisdpfx Aszlxx Hea Eed Shelving offer of 30.06 linear meters consisting of: - 031 x uprights approx. 200 x 40 cm, pre-assembled - 180 x shelves approx. 100 x 40 cm - 720 x shelf supports - 030 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir zinc-plated - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2179.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements… We will be happy to help you with the implementation of your projects, from planning and ordering to assembly. Are you interested or have any questions? Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 3.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 3.06 linear meters Shelving unit offer 1.06 linear meters, consisting of: - 04 x uprights approx. 200 x 40 cm, pre-assembled - 18 x shelves approx. 100 x 40 cm - 72 x shelf supports - 03 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir galvanized - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: Iodpfxezlxxye Aa Eeid €253.00 net plus legally applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your requirements... We will be happy to help you with the implementation of your projects, from planning to ordering and assembly. Are you interested or do you have any questions? Simply contact us by message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 8.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 8.06 linear meters Shelving offer of 8.06 linear meters, consisting of: - 09 x uprights approx. 200 x 40 cm, pre-assembled - 48 x shelves approx. 100 x 40 cm. - 192 x shelf supports. - 08 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 x storage levels. - Surface: Sendzimir galvanized. - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €643.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company, if desired; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning and ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You can find our telephone number on our company page. ☎️ Iedpfxozlxhnj Aa Ejid You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Speed (rpm): 1400 Voltage: 3x400V-50 Hz Power (kW): 3 Wheel size, driving wheel (ø mm): 200x100x28 Abrasive belt (mm): 100x1600 Tube diameter (ø mm): 21-76 Extraction capacity (m³/h): 600 With extraction unit Length (mm): 1430 Width (mm): 810 Height (mm): 1350 Net weight (kg): 205 Tube Notcher with Motor Brake - SCANTOOL 100 RSX The Scantool 100 RSX is the ideal tube grinding machine for all types of tubes and profiles. It simplifies welding and delivers a superior finish. The Scantool 100 RSX has been designed with series production in mind, where precision and clean work are required. Typical applications include the manufacture of railings, frames, go-karts, roll cages, wheelchairs, ship fittings, handrails, gates, fences, furniture frames, and stainless steel tube and profile works for the food industry, among others. The Scantool 100 RSX grinds tubes and profiles made from any material in the range of Ø 21 to 76 mm. Built-in powerful extraction The Scantool 100 RSX features an integrated high-performance dust extraction unit that removes most of the grinding dust directly at the belt. Isdpsw Ew D Rsfx Aa Ejid For the best dust collection solution, the Scantool 100S can be installed directly behind the belt grinder. The Scantool Cyclone 100S is available as an optional accessory. Key advantages of the Scantool 100 RSX tube grinder: • The only tube notcher on the market where the grinding unit can be set to the desired grinding angle • Does not require lateral space when grinding long tubes • Any angle can be set quickly and easily—without the need for tools • Precision grinding of tubes and profiles at any angle • Perfect adjustment of the contact roller to the required diameter • High-quality and robust side guidance • Ideally suited for series production. Original images coming soon.