Used Marel Active Mixer 200 for sale (21,363)

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational Nlodett T Nfjpfx Ab Ash I invite you to contact me

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Nsdpfx Ashtaaqob Aolh Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, This listing is for 1 of 2 Fisherbrand F2 Vortex Mixer Nsdpexzgvrefx Ab Aelh

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Nodpfx Aboxzg Eys Aolh Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Nodsxiy R Ejpfx Ab Aelh Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Nodox Uqb Iopfx Ab Aolh Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm Nljdpjzqt Umsfx Ab Ajh B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation Nedpfxoxfluus Ab Aslh The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland. Nledpfoy Tvtmjx Ab Ash

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Nedpfsi Dfidjx Ab Aolh Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Technical Data: Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Nedpfx Abez Nw H Ae Aolh Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades.

Condition: used, mileage: 32 km, power: 92 kW (125.09 HP), first registration: 10/2026, fuel type: gasoline, overall weight: 2,115 kg, color: blue, gearing type: automatic, number of seats: 2, total length: 4,343 mm, total width: 1,813 mm, total height: 1,853 mm, loading space length: 1,803 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4441.NW26.TM86368 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Tow bar, fixed * Halogen headlights with LED daytime running lights, including headlight bezel in black * Rear cargo area mat, continuous * Payload increase by approx. 175 kg * Winter Package 2 - Steering wheel, heated - Windscreen, heated - Seat Package 5: - Driver's seat, 6-way adjustable and heated - Passenger seat, 4-way adjustable and heated - Lumbar support, driver's seat - Armrest, driver's seat - Partition, full without window * Sliding door, right and left ADDITIONAL EQUIPMENT * "Active" badge * 12-volt socket, in the passenger compartment * Central locking: 2 vehicle keys with remote control * 2 vehicle keys with remote control, one of which is foldable * ABS * Cover strip for sliding door guide * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Exterior mirrors, electrically adjustable and heated, painted black * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display * Roof rails, silver * Double-wing rear door * Rev counter * Third brake light (with LEDs) * Door sill trims "Active" * Electronic Stability Program (ESP) * Vehicle modem 5G * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * FordPass Connect * Floor mats, front in "Active design" * 7-speed automatic transmission * Rubber mat in the driver's cab * Glove compartment with lid * Interior lighting * Air conditioning with automatic temperature control * Airbag: Head/shoulder airbags - right and left * Headrests (2), height-adjustable * Radiator grille, Active design in black * Cargo area lighting * Charging station, inductive * Audio remote control on the steering wheel * Center console, large * Fog lights Nlsdozuh E Iepfx Ab Aeh * Emergency brake light - pulsating illumination of the brake lights during heavy braking * Emergency Call Assist * Without rear window * Gasoline particulate filter (OPF) * Driver Assistance Package 2 - Ford Audio with 8-inch touchscreen and Ford SYNC 4 - Pre-Collision Assist, camera-based - High Beam Assist - Lane Keeping Assist including Lane Departure Warning - Cruise control - Intelligent Speed Limiter with speed limit display - Wrong-way driving warning function - Traffic Sign Recognition System - Park Pilot System front + rear - Rear view camera - Front windows, electric * Upholstery: Luxury fabric * Audio system 2 - Ford SYNC 4 with 8-inch touchscreen - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 4 speakers front - USB connection - Bluetooth hands-free system and audio streaming - Android Auto and Apple CarPlay (wireless pairing) * Tire repair kit * Tire pressure monitoring system (TPMS) * Alloy wheels 7 J x 17 - with 215/55 R 17 tires - 5-spoke design, in black, glossy turned * Rear lights, halogen * Windscreen wipers with rain sensor * Headlights, with chrome decorative trim * Side airbags - right and left * Power steering * Seat belts - Seat belt pretensioners and force limiters front - Warning system for unfastened seat belt for driver and passenger * Sun visor without mirror * Start-Stop system * Ford Power Start function (keyless starting) * Daytime running lights * Traction control (TCS) * Door handles, interior chrome * Underrun protection front and rear * Engine immobilizer * Central locking with remote control ... and more. ---- First owner. German version. Errors and prior sale excepted.

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² Nlodobpg Ncopfx Ab Ajh • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Nledpfxjq H Sqdj Ab Aeh Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 440 mm, controller manufacturer: FANUC, controller model: 21i-T, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Cincinnati HAWK 200 was manufactured in 2004. It features a turning length of 500 mm and a maximum turning diameter of 250 mm. The machine is equipped with a FANUC 21i-T CNC control and has a turret capacity of 12 tools. If you are looking to get high-quality turning capabilities, consider the Cincinnati HAWK 200 CNC lathe we have for sale. Contact us for further details. • Turning length: 500 mm • Maximum turning diameter: 250 mm • Swing over bed: 400 mm Nljdpfez N A U Sjx Ab Aeh • Swing over cross slide: 380 mm • Spindle bore: 63 mm • Driven tools: Yes, 6 driven tools Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display Nedez Iq Trspfx Ab Aelh - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) Nlsdpjz Irx Nofx Ab Ajh ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) Nodpfx Aboz Ir Has Aolh - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Capacity 4100 x 200 tons Nsdpfxsz H Udle Ab Aelh Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,205 kg, color: grey, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 2,002 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4714.CHO26.TB19344 Njdpfx Abez I Hlwe Aelh Errors and omissions excepted! ----SPECIAL EQUIPMENT * Tow hitch, electrically pivoting * Exclusive package: Panoramic roof - Rear seat package 21 (6 rear seats, sliding doors, right and left, 2nd row with 3 individual seats, outer seats heated, middle seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting * Windows, 2nd row: Opening windows in the side windows * Ford audio system with 13-inch multifunction display and Ford SYNC 4 incl. navigation * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beam incl. all-weather light - LED high beam, glare-free - LED daytime running lights incl. integrated LED turn signals in the front - LED cornering light, static - Speed-dependent headlight beam adjustment - LED taillights * Wheels: Alloy wheels 7.5 J x 19 in Active design in Absolute Black with 235/50 R19 111/109T tires * Sliding door, electric, right and left - with hands-free function and incl. sun protection blinds in the 2nd row - Ford Key Free system incl. Ford Power Start function * Auxiliary heater (fuel-water heater) with remote control * Technology package 6: Exterior mirrors electrically adjustable, heated and folding - Blind spot assist incl. CTA with trailer detection - Rear collision warning assist - Pre-Collision Assist, camera and radar-based - Driver drowsiness warning - Lane keeping assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Park assist system front/rear - Adaptive cruise control with Stop&Go function - Intelligent speed limiter with speed limit display - 360-degree camera - Steering wheel in Sensico leather look FURTHER EQUIPMENT * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Airbags: Side airbags - right and left * All-wheel drive * Roof console * Roof rails, silver * Anti-theft alarm THATCHAM - with interior monitoring in the driver's cabin and cargo area incl. central locking with additional double locking * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Window lifters, front, electric - with quick-up/down function * Heated windshield * Automatic climate control, 3-zone - with automatic temperature control for driver and passenger side as well as rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Charging station, inductive in the center console, for mobile devices - according to Qi standard * Center console, large * Driver drowsiness warning * Emergency call assist eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 in Active design * Windshield wipers with rain sensor * Sliding door, with power assist * Rail-based flexible seating system * Seat package 29: Front passenger single seat, 4-way manually adjustable - Driver seat, 5-way electrically adjustable - Seat heating for driver and passenger - Armrests inside and outside - Lumbar support for driver, electric - Lumbar support for passenger - Side airbags, right and left - Head and shoulder airbags in front, right and left - Part-synthetic leather upholstery Active, seat center in fabric, upholstery in synthetic leather velvet Black Onyx * Start-stop system * Socket: 12-volt c

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,205 kg, color: white, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 2,002 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4713.CHO26.TB19246 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Trailer coupling, electrically pivoting * Battery: H8 AGM dual battery * Exclusive Package: Panoramic roof - Rear seat package 21 (6 rear seats, sliding doors, left and right, 2nd row with 3 individual seats, outer seats heated, center seat with folding table on the backrest, 3rd row with individual seats) - 15 B&O speakers - Ambient lighting Nlsdpfx Aboz I Hl Dj Aeh * Ford audio system with 13-inch multifunction display and Ford SYNC 4 incl. navigation * Fuel tank 70 l * Heated steering wheel * Matrix-LED headlights, adaptive - LED low beam incl. all-weather light - LED high beam, glare-free - LED daytime running lights incl. integrated LED turn signals at the front - LED cornering light, static - Speed-dependent headlight range control - LED taillights * Sliding door, electric, left and right - with hands-free function and incl. sun protection blinds in the 2nd row - Ford Key Free system incl. Ford Power start function * Stand heater (fuel-water heater) with remote control * Technology Package 6: Exterior mirrors, electrically adjustable, heated, and folding - Blind Spot Assist incl. CTA with trailer detection - Rear parking assist - Pre-Collision Assist, camera- and radar-based - Driver drowsiness warning - Lane keeping assist, lane departure warning, lane change assist, lane pilot - Traffic sign recognition - Wrong-way driver warning function - Park Pilot system front/rear - Adaptive cruise control with Stop&Go function - Intelligent speed limiter with speed limit display - All-round view camera - Steering wheel in Sensico leather look OTHER EQUIPMENT * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function * Airbag, driver side * Airbag: Side airbag - left and right * All-wheel drive * Roof console * Roof rails, silver * Anti-theft alarm THATCHAM - with interior monitoring in the driver's cab and cargo area incl. central locking with double locking * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Power windows, front, electric - with quick-up/down function * Heated windshield * Automatic climate control, 3-zone - with automatic temperature control for the driver and passenger side as well as the rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Charging station, inductive in the center console, for mobile devices - according to Qi standard * Center console, large * Driver drowsiness warning * Emergency call assist eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 17 in Active Design * Windshield wipers with rain sensor * Sliding door, with power assist * Rail-based flexible seating system * Seat package 29: Passenger single seat, 4-way manually adjustable - Driver seat, 5-way electrically adjustable - Seat heating for driver and passenger - Armrests inside and outside - Lumbar support for driver, electric - Lumbar support for passenger - Side airbags, left and right - Head-shoulder airbags front left and right - Partial synthetic leather cover Active, seat center panel in fabric, upholstery in synthetic leather velour Black Onyx * Start-Stop system * Socket: 12-volt connection - in the passenger compartment * Carpet in the entire vehicle * USB port, front * Lashing eyes 2 * Immobilizer * Heat-reflecting g

Condition: used, mileage: 4,710 km, power: 55 kW (74.78 HP), first registration: 07/2025, fuel type: diesel, color: white, next inspection (TÜV): 07/2026, driver cabin: other, gearing type: other, Year of construction: 2025, operating hours: 165 h, total length: 5,090 mm, total width: 1,420 mm, total height: 2,340 mm, maximum speed: 50 km/h, * 224901 Swingo 200+ 2 Brush System * 225101 Euromot 5 Engine 55 kW (75 hp) * 225201 500-hour Long Life Oil * 225404 50 km/h * 225300 Hydro-pneumatic Suspension * 231701 Noise Reduction for Cabin & Container * 187001 Steering Wheel Knob * 226502 Radio DAB+ * 226601 Rear View Camera * 226701 Suction Nozzle Camera * 226801 Reverse Warning System, Switchable * 226901 12 Volt Socket * 235001 Standard Monitor * 226301 3-Point Safety Belt for Driver * 226401 2-Point Belt (Lap Belt) for Passenger * 230501 Rotating Beacon, Foldable * 228503 Sweeper Brush, Mixed (Poly/Steel) * 228801 Rollers for Suction Nozzle instead of Skids Nodpfx Ajz Sc T Usb Aelh * 227301 Independent Brush Control * 227401 C-Shaped Brush Arms * 228701 17 mm Rubber Suction Nozzle * 228901 Stainless Steel Container Pipe * 229201 Hand Suction Hose Preparation * 190701 Standard Paint, RAL 9016 White * 1317SWINGO Operating Manual * 232601 Wheel Chock with Holder * 100901SWIN Modem Kit IntelliOPS Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Nledpfxjzyihuo Ab Ajh Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. Nodpfx Ajxawctob Aelh This is an exchange spindle, which means a used part is required in return. If you have any further questions, we are happy to assist you.

Condition: good (used), Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Nlodpfxjy Hlapo Ab Aeh Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420